Biogenic silver nanoparticles: Green synthesis, encapsulation, thermal stability and antimicrobial activities

Effect of Kaolin clay and Ficus carica mediated silver nanoparticles on chitosan food packaging film for fresh apple slice preservation

In this work, a novel antioxidant, antibacterial, and biodegradable food packaging film was elaborated, by incorporating natural kaolin clay (KC) and Ficus carica mediated silver nanoparticles (AgNPs) into Chitosan (Cht). A comparison of the physico-chemical and functional characteristics of the Cht/KC/AgNPs film was performed with those of Cht, Cht/KC, and Cht/AgNPs. SEM analysis showed a rough surface in the composite films containing KC particles because of their large diameter (50-120 μm) compared to AgNPs (20-80 nm). The FTIR analysis suggested that the interactions between Cht and AgNPs were stronger than those between Cht and KC. The tensile strength of Cht film increased from 16 MPa to ∼24 MPa in Cht/KC/AgNPs film. The introduction of KC and/or AgNPs considerably improved the light and moisture barrier capacity of the Cht film. The UV light transmittance decreased by 50 % for Cht film when incorporated by KC and AgNPs. Moreover, Cht/AgNPs was better in terms of antioxidant, antibacterial, and mechanical compared to Cht/KC, which was superior in biodegradability and water vapor barrier capacity. In particular, the Cht/KC/AgNPs film presented good barrier, antioxidants, antibacterial, mechanical, and biodegradable properties, owing to the synergistic effect between KC and AgNPs. For the packaging properties, all the films were tested for their ability to keep the freshness of apple slices as wrapping material. The films exhibited good results, and the Cht/KC/AgNPs showed promising performance regarding the moisture loss, browning index, total phenolic compound, and antioxidant activity of the apple slices. Moreover, the Cht/KC/AgNPs film exhibited a migration of silver meeting the standards set by EFSA and ECHA, which makes this film safe for food packaging.

On Recent Developments in Biosynthesis and Application of Au and Ag Nanoparticles from Biological Systems

Gold nanoparticles (AuNPs) and silver nanoparticles (AgNPs) are extensively studied nanoparticles (NPs) and are known to have profound applications in medicine. The researcher made continuous efforts for the environmental-friendly and economical methods, such as biogenic methods known as green synthesis. There are many strategies for separating and applying gold (Au) and silver (Ag) nanoparticles, of which biological routes have emerged as efficient, low-cost, and environmentally friendly techniques. This review focuses on recent developments of green synthesized AuNPs and AgNPs using biogenic sources such as algae, animals, plants, microbes, bacteria, fungi, and so on. Hence, it discusses their numerous biomedical applications and separating Au and Ag nanoparticles from plants, bacteria, fungi, and algae.

A Survey on Analytical Methods for the Characterization of Green Synthesized Nanomaterials

Nowadays, nanotechnologies are well established and the uses of a great variety of nanomaterials show exponential growth. The development of green synthesis procedures experienced a great development thanks to the contribution of researchers of diverse origins. The versatility of green chemistry allows producing a wide range of organic and inorganic nanomaterials with numerous promising applications. In all cases, it is of paramount importance to carefully characterize the resulting nanomaterials because their properties will determine their correct performance to accomplish the function to which they were synthesized or even their detrimental effects like nanotoxicological behavior. This review provides an overview of frequently employed characterization methods and their applications for green synthesized nanomaterials. However, while several different nanoscale materials and their associated green construction methodology are being developed, other important techniques would be extensively incorporated into this field soon. The aim is to encourage researchers in the field to employ a variety of these techniques for achieving an exhaustive characterization of new nanomaterials and for contributing to the development of validated green synthesis procedures.

Synthesis, characterization, and cytotoxicity of starch-encapsulated biogenic silver nanoparticle and its improved anti-bacterial activity

The present work reported synthesis, characterization, and biocompatibility of starch encapsulated silver nanoparticles (St-PF-AgNPs) and their antibacterial activity. The synthesis of St-PF-AgNPs involved in two steps: (i) synthesis of the biogenic silver nanoparticles using the fungal extracts (PF-AgNPs); and, (ii) encapsulation of starch in PF-AgNPs (St-PF-AgNPs). The surface plasmon resonance was found at 420 nm for the PF-AgNPs while it was at 260 and 420 nm for the St-PF-AgNPs. FTIR spectrum demonstrated the capping and encapsulation of the fungal extracts and starch in PF-AgNPs and St-PF-AgNPs. The XRD and TEM-EDS confirmed the crystalline nature, spherical-shaped , and polydispersed- PF-AgNPs and St-PF-AgNPs with strong signals of Ag. The St-PF-AgNPs showed a Z-average size of 115.2 d.nm and zeta potential of -17.8 (mV) as indicated by DLS and zeta potentials. The cytotoxicity results demonstrated higher toxicity of PF-AgNPs than St-PF-AgNPs in HEK293 cells. The antibacterial activity of St-PF-AgNPs were higher than PF-AgNPs in S. aureus. Overall, this work concluded that the starch encapsulation significantly increased the antibacterial activity of PF-AgNPs and this opens a new avenue for the treatment of bacterial infections through the sustained release of PF-AgNPs to target pathogenic bacterial cells.

Facile deposition of biogenic silver nanoparticles on porous alumina discs, an efficient antimicrobial, antibiofilm, and antifouling strategy for functional contact surfaces

Surface modification is an emerging strategy for the design of contact materials. Fabricated alumina discs were functionalized by deposition of biogenic silver nanoparticles. The surfaces were characterized for physico-chemical, antibacterial and antibiofilm properties against microbial pathogens. The surface demonstrated improved hydrophobicity and a surface silver nanoparticle content of 6.4 w%. A reduction of more than 99.9% in CFU mL^-i was observed against the Gram-positive and Gram-negative bacteria tested, with >90% reduction of the fungal isolate. After 4 h, microbial adhesion was reduced by >99.9 and 90% for Escherichia coli and Staphylococcus aureus, respectively. Scanning electron micrographs further revealed a biofilm reduction. Cell viability tests indicated a bioincompatibility higher than 80% with Caco-2 and HaCaT cell lines after 48 h contact. The results suggest that deposition of biogenic silver nanoparticles on the surface of contact materials could be employed as a strategy to prevent biofilm formation.

Bioavailability and antioxidant activity of nanotechnology-based botanic antioxidants

Botanic bioactive substances have issues with their solubility, stability, and oral bioavailability in the application, which could be improved by nanotechnologies. In another hands, green synthesis of nanoparticles (NPs) with plant extract is also a promising technology for preparation of NPs due to its safety advantage, yet the bioactive botanic substances that could be more than the assistant of the green synthesis of NPs. Based on the above concerns, this review summarized the preparation of botanic NPs with various plant extract, their solubility, stability, and oral bioavailability; specific attention has been paid to the botanic Ag/Au NPs, their capacity of antioxidant, bioavailability, antimicrobial, anti-inflammatory, and anticancer.

Synthesis, characteristics and medical applications of plant nanomaterials

The recent preparations of metal nanoparticles using plant extracts as reducing agents are summarized here. The synthesis and characterization of plant-metal nanomaterials and the progress in antibacterial and anti-inflammatory medical applications are detailed, providing a new vision for plant-based medical applications. The medical application of plant-metal nanoparticles is becoming a research hotspot. Compared with traditional preparation methods, the synthesis of plant-metal nanoparticles is less toxic and more eco-friendly, increasing application potential. Highly efficient plant-metal nanoparticles are usually smaller than 100 nm. This review describes the synthesis, characterization and bioactivities of gold- and silver-plant nanoparticles as examples and clearly explained their antibacterial and anticancer mechanisms. An analysis of actual cases shows that the synthetic method and type of plant extract affect the activities of the products.

Cu Nanoparticle-Loaded Nanovesicles with Antibiofilm Properties. Part I: Synthesis of New Hybrid Nanostructures

Copper nanoparticles (CuNPs) stabilized by quaternary ammonium salts are well known as antimicrobial agents. The aim of this work was to study the feasibility of the inclusion of CuNPs in nanovesicular systems. Liposomes are nanovesicles (NVs) made with phospholipids and are traditionally used as delivery vehicles because phospholipids favor cellular uptake. Their capacity for hydrophilic/hydrophobic balance and carrier capacity could be advantageous to prepare novel hybrid nanostructures based on metal NPs (Me-NPs). In this work, NVs were loaded with CuNPs, which have been reported to have a biofilm inhibition effect. These hybrid materials could improve the effect of conventional antibacterial agents. CuNPs were electro-synthesized by the sacrificial anode electrolysis technique in organic media and characterized in terms of morphology through transmission electron microscopy (TEM). The NVs were prepared by the thin film hydration method in aqueous media, using phosphatidylcholine (PC) and cholesterol as a membrane stabilizer. The nanohybrid systems were purified to remove non-encapsulated NPs. The size distribution, morphology and stability of the NV systems were studied. Different quaternary ammonium salts in vesicular systems made of PC were tested as stabilizing surfactants for the synthesis and inclusion of CuNPs. The entrapment of charged metal NPs was demonstrated. NPs attached preferably to the membrane, probably due to the attraction of their hydrophobic shell to the phospholipid bilayers. The high affinity between benzyl-dimethyl-hexadecyl-ammonium chloride (BDHAC) and PC allowed us to obtain stable hybrid NVs c.a. 700 nm in diameter. The stability of liposomes increased with NP loading, suggesting a charge-stabilization effect in a novel antibiofilm nanohybrid material.