Solvation in ionic liquid-water mixtures: A computational study

Plant-inspired rearrangement of liquid in a porous structure for controlled swelling

Soft robots can adapt to dynamic environments without prior knowledge of their properties. Plants inspire mechanisms for counterbalancing dynamic loads by locally modulating compliance through anisotropic humidity-responsive materials and structures. In addition to well-known passive bilayers, plants may also actively control swelling. The combination of robust hygroscopic material-level response and simple electrical control makes active swelling particularly attractive for technological implementation. However, dynamic swelling demands the development and optimisation of congruent pumping solutions. This work suggests electrohydrodynamic pumping, enabled by highly reversible ion immobilisation at capacitive electrodes, as a particularly suitable low-pressure, high-area liquid displacement solution for active swelling. Local pore fill ratio (PFR) modulation is used as a measure for dynamic liquid displacement and swelling. A method for highly localised (10μm membrane thickness) assessment of the dynamic variation of PFR in a 400μm laminate undergoing cross-plane electrokinetic liquid displacement is developed. Two modes for transient PFR modulation were identified: electrokinetic ion transfer and diffusive solvent redistribution, pronounced at high and low voltage scan rates, respectively. The strategic combination of these modes enables various compliance-modulation scenarios. The system contains (within a cycle) a constant amount of liquid in an open network of liquid-filled pores. 30%-75% PFR yielded the highest dynamic PFR modulation: a high amount of empty pores is beneficial, yet a too-low PFR compromises the continuous liquid pathway necessary for electrokinetic pumping. The dynamic nature of internal liquid rearrangement was characterised by relatively fast electrokinetics-driven fluxes (6.3% PFR change in 80 s), followed by a slow equilibration of concentration and PFR. At high scan rates, PFR decreased at positive polarisation, while both positive and negative polarity yielded a similar decrease at low scan rates (5 mV s-1). Localised control over the swelling gradient enables the design of systems that morphologically adapt to complex dynamic loading conditions.

Study of the Plasticization Effect of 1-Ethyl-3-methylimidazolium Acetate in TPS/PVA Biodegradable Blends Produced by Melt-Mixing

The first step towards the production and marketing of bioplastics based on renewable and sustainable materials is to know their behavior at a semi-industrial scale. For this reason, in this work, the properties of thermoplastic starch (TPS)/polyvinyl alcohol (PVA) films plasticized by a green solvent, as the 1-ethyl-3-methylimidazolium acetate ([Emim⁺][Ac^-]) ionic liquid, produced by melt-mixing were studied. These blends were prepared with a different content of [Emim⁺][Ac^-] (27.5-42.5 %wt.) as a unique plasticizer. According to the results, this ionic liquid is an excellent plasticizer due to the transformation of the crystalline structure of the starch to an amorphous state, the increase in flexibility, and the drop in T_g, as the [Emim⁺][Ac^-] amount increases. These findings show that the properties of these biomaterials could be modified in the function of [Emim⁺][Ac^-] content in the formulations of TPS, depending on their final use, thus becoming a functional alternative to conventional polymers.

Structural investigations of molecular solutes within nanostructured ionic liquids

Ionic liquids (ILs) containing sufficiently long alkyl chains form amphiphilic nanostructures with well-defined polar and non-polar domains. Here we have explored the robustness of these amphiphilic nanostructures to added solutes and gained insight into how the nature of the solute and IL ions affect the partitioning of these solutes within the nanostructured domains of ILs. To achieve this, small angle X-ray scattering (SAXS) investigations were performed and discussed for mixtures of 9 different molecular compounds with 6 different ILs containing imidazolium cations. The amphiphilic nanostructure of ILs persisted to high solute concentrations, over 50 mol% of added solute for most 1-butyl-3-methylimidazolium ILs and above 80 mol% for most 1-decyl-3-methylimidazolium ILs. Solute partitioning within these domains was found to be controlled by the inherent polarity and size of the solute, as well as specific interactions between the solute and IL ions, with SAXS results corroborated with IR spectroscopy and molecular dynamics simulations. Molecular dynamics simulations also revealed the ability to induce π⁺-π⁺ stacking between imidazolium cations through the use of these added molecular compounds. Collectively, these results provide scope for the selection of IL ions to rationally influence and control the partitioning behaviour of given solutes within the amphiphilic nanostructure of ILs.

Restructuring a Deep Eutectic Solvent by Water: The Nanostructure of Hydrated Choline Chloride/Urea

Deep eutectic mixtures are a promising sustainable and diverse class of tunable solvents that hold great promise for various green chemical and technological processes. Many deep eutectic solvents (DES) are hygroscopic and find use in applications with varying extents of hydration, hence urging a profound understanding of changes in the nanostructure of DES with water content. Here, we report on molecular dynamics simulations of the quintessential choline chloride-urea mixture, using a newly parametrized force field with scaled charges to account for physical properties of hydrated DES mixtures. These simulations indicate that water changes the nanostructure of solution even at very low hydration. We present a novel approach that uses convex constrained analysis to dissect radial distribution functions into base components representing different modes of local association. Specifically, DES mixtures can be deconvoluted locally into two dominant competing nanostructures, whose relative prevalence (but not their salient structural features) change with added water over a wide concentration range, from dry up to ∼30 wt % hydration. Water is found to be associated strongly with several DES components but remarkably also forms linear bead-on-string clusters with chloride. At high water content (beyond ∼50 wt % of water), the solution changes into an aqueous electrolyte-like mixture. Finally, the structural evolution of the solution at the nanoscale with extent of hydration is echoed in the DES macroscopic material properties. These changes to structure, in turn, should prove important in the way DES acts as a solvent and to its interactions with additive components.