Interfacial activity and emulsion stabilization of dissolved cellulose

Perspectives on the Lindman Hypothesis and Cellulose Interactions

In the history of cellulose chemistry, hydrogen bonding has been the predominant explanation when discussing intermolecular interactions between cellulose polymers. This is the general consensus in scholarly textbooks and in many research articles, and it applies to several other biomacromolecules' interactions as well. This rather unbalanced description of cellulose has likely impacted the development of materials based on the processing of cellulose-for example, via dissolution in various solvent systems and regeneration into solid materials, such as films and fibers, and even traditional wood fiber handling and papermaking. In this review, we take as a starting point the questioning of the general description of the nature of cellulose and cellulose interactions initiated by Professor Björn Lindman, based on generic physicochemical reasoning about surfactants and polymers. This dispute, which became known as "the Lindman hypothesis", highlights the importance of hydrophobic interactions in cellulose systems and that cellulose is an amphiphilic polymer. This paper elaborates on Björn Lindman's contribution to the subject, which has caused the scientific community to revisit cellulose and reconsider certain phenomena from other perspectives.

Influence of Cellulose Nanofibers on the Behavior of Pickering Emulsions. Part 1. Microscopy and Startup Flow Test

The dispersibility of flexible polymer chains present at the emulsion's interface between the dispersed and continuous phase has obvious effects on rheology and dielectric properties of the whole emulsion. Cellulose nanofiber (CNF)-based Pickering emulsions are good systems to research these properties with respect to their microscopic phase structure, dielectric, and rheological properties by using CNF as a water-dispersible Pickering emulsifier, liquid paraffin as an oil phase, and didodecyldimethylammonium bromide (DDAB) as a cationic auxiliary surfactant. The CNF and DDAB contents were systematically varied while the water-to-paraffin oil ratio was kept constant to discern the influence of the Pickering emulsifiers. Polarized optical microscopic images reveal that the droplets tend to shrink at higher CNF content but grow bigger when increasing the DDAB content, which is proved by fluorescence analysis of the CNF dispersibility with varying DDAB content. The dielectric damping exhibits a minimum, whose value decreases with increasing DDAB and CNF content. Increasing the DDAB content promotes the solubilization of CNF in the aqueous phase, which will increase the overall viscosity and yield points. Similarly, a higher CNF content leads to a higher viscosity and yield point, but at high DDAB contents, the viscosity function exhibits an S-shape at intermediate CNF contents. To evaluate the results further, they were compared with CNF dispersions (without oil phase), which showed a surfactant effect slightly on maximum stress but strongly on yield stress τy, indicating that DDAB can promote the formation of a CNF network rather than the viscosity of the whole system. This paper provides information on how a systematical variation of the composition influences morphology and physico-chemical interactions as detected by broadband dielectric spectroscopy and rheological behavior.

Effect of Oil on Cellulose Dissolution in the Ionic Liquid 1-Butyl-3-methyl Imidazolium Acetate

While ionic liquids (ILs) are well known to be excellent solvents for cellulose, the exact mechanism of dissolution has been a much disputed topic in recent years and is still not completely clear. In this work, we add to the current understanding and highlight the importance of hydrophobic interactions, through studying cellulose dissolution in mixtures of 1-butyl-3-methyl imidazolium acetate (BmimAc) and medium-chain triglyceride (MCT) oil. We demonstrate that the order in which constituents are mixed together plays a key role, through nuclear magnetic resonance (NMR) spectroscopic analysis. When small quantities of MCT oil (0.25-1 wt %) were introduced to BmimAc before cellulose, the effect on BmimAc chemical shift values was much more significant compared to when the cellulose was dissolved first, followed by oil addition. Rheological analysis also showed small differences in the viscosities of oil-cellulose-BmimAc solutions, depending on the order the constituents were added. On the other hand, no such order effect on the NMR results was observed when cellulose was replaced with cellobiose, suggesting that this observation is unique to the macromolecule. We propose that a cellulose-oil interaction develops but only when the cellulose structure has a sufficient degree of order and not when the cellulose is molecularly dispersed, since the hydrophobic cellulose plane is no longer intact. In all cases, cellulose-BmimAc-oil solutions were stable for at least 4 months. To our knowledge, this is the first work that investigates the effect of oil addition on the dissolving capacity of BmimAc and highlights the need for further re-evaluation of accepted mechanisms for cellulose dissolution in ILs.

Structural Insights into Cellulose-Coated Oil in Water Emulsions

Cellulose is a renewable biopolymer, abundant on Earth, with a multi-level supramolecular structure. There has been significant interest and advancement in utilizing natural cellulose to stabilize emulsions. In our research, we develop and examine oil in water emulsions surrounded by unmodified cellulose as microreactors for the process of transformation of cellulose into valuable chemicals such as biodiesel. This study presents morphological characterization of cellulose-coated emulsions that can be used for such purposes. Cryogenic-scanning electron microscopy imaging along with light microscopy and light scattering reveals a multi-layer inner structure: an oil core surrounded by a porous cellulose hydrogel shell, coated by an outer shell of regenerated cellulose. Measurements of small-angle X-ray scattering provide quantification of the nano-scale structure within the porous cellulose hydrogel inner shell of the emulsion particle. These characteristics are relevant to utilization of cellulose-coated emulsions in various applications such as controlled release and as hosts for enzymatic biotechnological reactions.

Recent Developments in the Formulation and Use of Polymers and Particles of Plant-based Origin for Emulsion Stabilizations

The main scope of this Review was the recent progress in the use of plant-based polymers and particles for the stabilization of Pickering and non-Pickering emulsion systems. Due to their availability and promising performance, it was discussed how the source, modification, and formulation of cellulose, starch, protein, and lignin-based polymers and particles would impact their emulsion stabilization. Special attention was given toward the material synthesis in two forms of polymeric surfactants and particles and the corresponding formulated emulsions. Also, the effects of particle size, degree of aggregation, wettability, degree of substitution, and electrical charge in stabilizing oil/water systems and micro- and macro-structures of oil droplets were discussed. The wide range of applications using such plant-based stabilizers in different technologies as well as their challenge and future perspectives were described.

Lignin enhances cellulose dissolution in cold alkali

Aqueous sodium hydroxide solutions are extensively used as solvents for lignin in kraft pulping. These are also appealing systems for cellulose dissolution due to their inexpensiveness, ease to recycle and low toxicity. Cellulose dissolution occurs in a narrow concentration region and at low temperatures. Dissolution is often incomplete but additives, such as zinc oxide or urea, have been found to significantly improve cellulose dissolution. In this work, lignin was explored as a possible beneficial additive for cellulose dissolution. Lignin was found to improve cellulose dissolution in cold alkali, extending the NaOH concentration range to lower values. The regenerated cellulose material from the NaOH-lignin solvents was found to have a lower crystallinity and crystallite size than the samples prepared in the neat NaOH and NaOH-urea solvents. Beneficial lignin-cellulose interactions in solution state appear to be preserved under coagulation and regeneration, reducing the tendency of crystallization of cellulose.

Hydrophobic interactions control the self-assembly of DNA and cellulose

Desoxyribosenucleic acid, DNA, and cellulose molecules self-assemble in aqueous systems. This aggregation is the basis of the important functions of these biological macromolecules. Both DNA and cellulose have significant polar and nonpolar parts and there is a delicate balance between hydrophilic and hydrophobic interactions. The hydrophilic interactions related to net charges have been thoroughly studied and are well understood. On the other hand, the detailed roles of hydrogen bonding and hydrophobic interactions have remained controversial. It is found that the contributions of hydrophobic interactions in driving important processes, like the double-helix formation of DNA and the aqueous dissolution of cellulose, are dominating whereas the net contribution from hydrogen bonding is small. In reviewing the roles of different interactions for DNA and cellulose it is useful to compare with the self-assembly features of surfactants, the simplest case of amphiphilic molecules. Pertinent information on the amphiphilic character of cellulose and DNA can be obtained from the association with surfactants, as well as on modifying the hydrophobic interactions by additives.

Emulsion Formation and Stabilization by Biomolecules: The Leading Role of Cellulose

Emulsion stabilization by native cellulose has been mainly hampered because of its insolubility in water. Chemical modification is normally needed to obtain water-soluble cellulose derivatives. These modified celluloses have been widely used for a range of applications by the food, cosmetic, pharmaceutic, paint and construction industries. In most cases, the modified celluloses are used as rheology modifiers (thickeners) or as emulsifying agents. In the last decade, the structural features of cellulose have been revisited, with particular focus on its structural anisotropy (amphiphilicity) and the molecular interactions leading to its resistance to dissolution. The amphiphilic behavior of native cellulose is evidenced by its capacity to adsorb at the interface between oil and aqueous solvent solutions, thus being capable of stabilizing emulsions. In this overview, the fundamentals of emulsion formation and stabilization by biomolecules are briefly revisited before different aspects around the emerging role of cellulose as emulsion stabilizer are addressed in detail. Particular focus is given to systems stabilized by native cellulose, either molecularly-dissolved or not (Pickering-like effect).