Revealing the assembly mechanism of an octadecylamine based supramolecular complex on mild steel in condensate water: Correlative experimental and theoretical studies

Ultralong Stability of Ti3 C2 Tx -MXene Dispersion Through Synergistic Regulation of Storage Environment and Defect Capping with Tris-HCl Buffering

Aqueous MXene dispersion suffers from a bottleneck issue of oxidation, leading to its gradual deterioration and ultimately compromised physicochemical characteristics. Herein, Tris-HCl buffer is employed to stabilize the diluted Ti3 C2 Tx -MXene dispersion (0.05 mg mL-1 ) through the synergy of its potent pH-regulation capability and capping effect toward oxidation-susceptible defects/edges. Tris-HCl functionalized Ti3 C2 Tx maintained its original morphology, structure, and favorable dispersity even after 150 days of aging under naturally aerated conditions. The pH-regulation nature of Tris-HCl is elucidated through solution monitoring of Ti3 C2 Tx dispersion, while the adsorption of Tris-HCl onto defects/edges is revealed by spectral analysis and multi-scale simulations. Tris-HCl at the neutral pH can bind to the negatively charged basal plane of Ti3 C2 Tx via + HTris moiety, while the other moiety (Tris) interacts with the exposed edge-based Ti atoms and/or intrinsic defects, forming a Ti─N bond that prevents MXene from attack by H2 O and O2 . Besides, Tris-HCl stabilized Ti3 C2 Tx exhibited nearly identical capacitive characteristics to its freshly-etched counterpart, indicating the minimal impact of Tris-HCl on electrochemical performance of Ti3 C2 Tx during long-term storage. This study provides practical guidance for stabilizing MXene in their native aqueous dispersion without compromising the inherent properties.

Green β-cyclodextrin-based corrosion inhibitors: Recent developments, innovations and future opportunities

β-Cyclodextrin-based compounds are used to develop and innovate materials that protect against corrosion due to their sustainability, low cost, environmental friendliness, excellent water solubility and high inhibition efficiency. However, corrosion potentials of β-CD-based compounds were not reviewed with the modern trends. The essence of the problem is that a deep understanding of the development and innovation of β-CD-based compounds as corrosion inhibitors is very important in creating next-generation materials for corrosion protection. In this review, the fundamental behaviour, importance, developments and innovations of β-CD modified with natural and synthetic polymers, β-CD grafted with the organic compounds, β-CD-based supramolecular (host-guest) systems with organic molecules, polymer β-CD-based supramolecular (host-guest) systems, β-CD-based graphene oxide materials, β-CD-based nanoparticle materials and β-CD-based nanocarriers as corrosion inhibitors for various metals were reviewed and discussed with recent research works as examples. In addition, the corrosion inhibition of β-CD-based compounds for biocorrosion, microbial corrosion and biofouling was reviewed. It was found that (i) these compounds are sustainable, inexpensive, environmentally friendly, and highly water-soluble and have high inhibition efficiency; (ii) the molecular structure of β-CD makes it an excellent molecular container for corrosion inhibitors compounds; (iii) the β-CD is excellent core to develop the next generation of corrosion inhibitors. It is recommended that (i) β-CD compounds would be synthesized by green methods, such as using biological sustainable catalysts and green solvents, green methods include irradiation or heating, energy-efficient microwave irradiation, mechanochemical mixing, solid-state reactions, hydrothermal reactions and multicomponent reactions; (ii) this review will be helpful in creating, enhancing and innovating the next green and efficient materials for future corrosion protection in high-impact industries.

Anticorrosive Effect of Halogenated Aniline Enaminoesters on Carbon Steel in HCl

Four enaminoesters derived from halogenated aniline, with potential anticorrosion activity, were synthesized and tested against carbon steel AISI 1020 in acid medium using 1.0 mol L-1 HCl. The synthesis was demonstrated through the reaction of ethyl acetoacetate with four different amines, in the presence of glacial acetic acid and molecular sieve, using ethanol as solvent for 24 h. The evaluation of the anticorrosive activity was performed using the gravimetric technique and electrochemical methods, such as electrochemical impedance spectroscopy (EIS), linear polarization resistance (LPR), and potentiodynamic polarization (PP). Results indicated that the F-EN (Ethyl (2Z)-3-[(4-fluoro-phenyl)-amino]-but-2-enoate) inhibitor had higher corrosion inhibition efficiency, of 98% by mass loss, and 85% by electrochemical techniques. Adsorption obeyed the Langmuir isotherm, thus suggesting that the inhibitors form a monolayer film in metal surface. These results also contributed to the calculations of the physicochemical parameters of $E_{\text{a}}$ , $△{H^{\ne }}_{\text{ads}}$ , and $△{S^{\ne }}_{\text{ads}}$ , which confirmed the corrosion inhibition when compared to the absence of the inhibitors.

Optimized Anticorrosion of Polypyrrole Coating by Inverted-Electrode Strategy: Experimental and Molecular Dynamics Investigations

To improve the poor adhesion and the ensuing insufficient anticorrosion efficacy of electropolymerized polypyrrole (PPy) on copper surface, an inverted-electrode strategy was applied after the passivation procedure, for which the compact coating (PPy-I) was deposited on the substrate in a cathodic window. Morphological and physical characterizations revealed that PPy-I exerted satisfactory adhesion strength and suitable thickness and conductivity compared with the analogue prepared via the traditional protocol (PPy-T). Potentiodynamic polarization, electrochemical impedance spectroscopy and frequency modulation were employed to ascertain the propitious protection of PPy-I for copper in artificial seawater (ASW). Due to the dominant electroactivity, the PPy-I-coated sample possessed higher apparent current density and lower charge transfer resistance than its PPy-T-protected counterpart, which maintained the passivation of the substrate. Surface analysis also supported the viability of PPy-I for copper in ASW for a well-protected surface with inferior water wettability. Molecular dynamics simulations evidenced that PPy-I with the higher density retained efficient anticorrosion capacity on copper at elevated temperatures. Therein, the derived time-dependent spatial diffusion trajectories of ions were locally confined with low diffusion coefficients. Highly twisted pore passages and anodic protection behavior arising respectively from the tight coating architecture and electroactivity contributed to the adequate corrosion resistance of PPy-I-coated copper.

Influence of Surface Pretreatments on the Anticorrosion of Polypyrrole Electro-Polymerized Coatings for Copper in Artificial Seawater

Plasma discharging treatment (hydroxylation) was conducted on copper surfaces for the subsequent electro-polymerization procedure of polypyrrole (PPy) coating (d-PPy). The hydroxylated surface could solve the criticized adhesion strength and protection efficiency of electropolymerized coatings for metal substrate in corrosive media. Compared with the counterpart obtained via passivation pretreatment (p-PPy), a well-adhered d-PPy layer was acquired on the hydroxylated copper surface, which earned a satisfactory adhesion grade, compactness and conductivity. Appreciable protection of d-PPy was measured for copper in the artificial seawater (ASW) at 298 K via electrochemical and surface analyses. Results of electrochemical measurements indicated that d-PPy coating effectively retarded copper corrosion in ASW with a lowered corrosion current density and improved charge transfer resistance. Surface analysis revealed that the typical morphology of PPy was retained after 240 h immersion in ASW. A favorable physical barrier and anodic protection efficacy might account for the superior protection of d-PPy coating for the underlying copper. Molecular dynamics simulations for the deposition of PPy chains on pristine and hydroxylated copper planes provided a definite correlation between the theoretical calculations and experimental observations. Theoretical modelling also disclosed in-depth the anchoring nature and anticorrosive mechanism for PPy toward the hydroxylated copper in ASW.

Synergetic Anticorrosion Mechanism of Main Constituents in Chinese Yam Peel for Copper in Artificial Seawater

Active constituents of Chinese yam peel (CYPE), namely, diosgenin (DOG), batatasin-I (BTS-I), batatasin-III (BTS-III), and yam polysaccharide (Y-PS), were extracted via an ultrasonic soaking strategy. The synergetic anticorrosion mechanism among these compounds for copper in artificial seawater (ASW) was clarified by gravimetric measurements, electrochemical evaluations, surface analyses, quantum chemical calculations under a dominant solvent model, and molecular dynamics (MD) simulations. The results of weight loss revealed that CYPE strongly inhibited the corrosion of copper in ASW, and the elevating temperature boosted the anticorrosion efficacy of CYPE. The inhibition efficiency could attain 96.33% with 900 mg/L CYPE in ASW at 298 K due to effective adsorption. CYPE simultaneously suppressed the anodic and cathodic reactions for copper in ASW, which could be categorized as the mixed-type corrosion inhibitor with the predominant anodic effect. Similar electrochemical kinetics was evidenced by electrochemical frequency modulation (EFM). Electrochemical impedance spectroscopy (EIS) indicated that CYPE prominently increased the charge-transfer resistance at the copper/electrolyte interface without altering the corrosion mechanism. Extending the immersion time was also conducive for CYPE to further minimize the corrosion of copper in ASW, which was demonstrated by the time-course polarization, EIS, and EFM tests. Owing to the adsorption of CYPE, the copper surface was well-protected and showed reduced wettability and limited variation of roughness. From the outcomes of quantum chemical calculations, global and local reactive descriptors of DOG implied the cross-linked deposition of actually formed dioscin on the copper surface; otherwise, those of BTS-I/-III showed the propensity for parallel adsorption, which could chemically anchor on the voids uncovered by dioscin and thereby synergistically inhibit the corrosion process. The adsorption orientations of DOG, BTS-I, and BTS-III were also consolidated by MD simulations. The findings of this study might be beneficial to inspire the development of eco-friendly corrosion inhibitors from plant wastes for copper in marine environments.

Efficient corrosion inhibition by sugarcane purple rind extract for carbon steel in HCl solution: mechanism analyses by experimental and in silico insights

Sugarcane purple rind ethanolic extract (SPRE) was evaluated as an efficient corrosion inhibitor for carbon steel (C-steel) in 1 M HCl solution. Dynamic weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and frequency modulation (EFM) measurements were employed to evaluate the anticorrosive efficiency of SPRE, which was further validated by morphological and wettability analyses. The results of the weight loss tests showed that the inhibition efficiency (η w) for C-steel in HCl solution increased with an increase in the concentration of SPRE. An increase in temperature moderately impaired the anticorrosive efficacy of SPRE. The maximum η w of 96.2% was attained for C-steel in the inhibition system with 800 mg L-1 SPRE at 298 K. The polarization curves indicated that SPRE simultaneously suppressed the anodic and cathodic reactions for C-steel in HCl solution, which can be categorized as a mixed-type corrosion inhibitor with a predominant anodic effect. The corrosion current density (i corr-P) was monotonously reduced with an increase in the concentration of SPRE. The charge transfer resistance (R ct) was enhanced for C-steel in the inhibition solution with a restrained capacitive property due to the adsorption of SPRE. A high temperature caused partial desorption of SPRE on the C-steel surface and a slight increase in i corr-P and decrease in R ct. However, SPRE still fully maintained its morphology and wettability at 328 K. The electrochemical kinetics of C-steel in HCl solution without and with SPRE was also supported by EFM spectra. The adsorption of SPRE conformed to the Langmuir isotherm and increased the corrosion activation energy of C-steel. Complementing the experimental observations, calculations based on density functional theory indicated that the hydroxyl-substituted pyran moiety on the carthamin (CTM) and anthocyanin (ATC) constituents in SPRE hardly contributed to its reactive activity due to their adsorption processes. Therefore, CTM and ATC exhibited imperfect parallel adsorption on the Fe (100) plane according to the molecular dynamics simulation, while anthoxanthin (ATA) and catechinic acid (CCA) constituents exhibited a flat orientation on the iron surface.

Understanding the anticorrosive mechanism of a cross-linked supramolecular polymer for mild steel in the condensate water: comprehensive experimental, molecular docking, and molecular dynamics investigations

A supramolecular polymer (CDP-DA) was prepared through the crosslinking reaction among the assembled complexes (CDDA) based on β-cyclodextrin (β-CyD) and octadecylamine (ODA). The structural properties of CDP-DA were clarified by experimental techniques such as Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscope, and thermal analysis. Based on the results of molecular docking, the crosslinking unit, CDDA, in the CDP-DA structure favors to exhibit the configuration that narrow rims of two host compounds (β-CyD) are opposite to each other leaving the amino group of ODA outside the host cavity. The corrosion inhibition performance of CDP-DA for mild steel in industrial condensate water was evaluated by electrochemical measurements and surface analyses, the mechanism of which was disclosed by molecular dynamics simulations in the aspects of adsorption equilibrium and ions diffusion models. The results of electrochemical tests indicate that CDP-DA effectively retards the anodic and cathodic reactions and improves the interfacial charge transfer resistance of mild steel in condensate water, which can be categorized as the mixed-type inhibitor. Surface analyses reveal that CDP-DA adsorbs on the steel surface in the integral form showing a monolayer nature, which is consolidated by molecular dynamics simulations. The diffusion behavior of in situ ions in the adsorbed layer is prominently suppressed as compared with those in bulk solution. The robust barrier layer and the mitigated diffusion of ions may contribute to the effective inhibition for CDP-DA against steel deterioration in the condensate water. Anticorrosive mechanism of a cross-linked supramolecular polymer for mild steel in the condensate water.