pH-responsive foams based on a transition between a bola surfactant and a traditional surfactant

CO2 responsive self-standing Pickering emulsion gel stabilized with rosin-based surfactant modified cellulose nanofibrils

Emulsion gel was developed to provide desirable texture, palatability and functionality to food products. Tunable stability of emulsions is often desired, as in certain situations, the chemical content release usually relies on emulsion induced destabilization of the droplet. However, the destabilization for emulsion gel is difficult because of the formation of highly entangled networks. To address this issue, a fully biobased Pickering emulsion gel stabilized by cellulose nanofibrils (CNF) modified with a CO2 responsive rosin-based surfactant, maleopimaric acid glycidyl methacrylate ester 3-dimethylaminopropylamine imide (MPAGN) was reported. The emulsification/de-emulsification can be reversibly regulated because this surfactant has sensitive CO2 responsive property. MPAGN can be reversibly between active cationic (MPAGNH+) and inactive nonionic (MPAGN) responsive to CO2 and N2. The microstructure of the emulsion gel was observed and compared before and after the response. The rheological properties of emulsion gel stabilized by different concentrations of MPAGNH+ and different contents of CNF were studied separately. As 0.2 wt% CNF was dispersed in 1 mM MPAGNH+ solution, the obtained emulsion can be self-standing for long duration. The rheology study indicated that these emulsions show typical gel characteristics with shear-thinning behavior. The stabilization mechanism of these gel emulsion is a synergistic effect caused by the combination of CO2 responsive Pickering emulsion and intertwined network caused by the hydrogen-bond interaction among CNF.

Chiral Quaternary Ammoniums Derived from Dehydroabietylamine: Synthesis and Application to Alkynylation of Isatin Derivatives Catalyzed by Silver

Abietic acid and its derivatives have broadly been used in fine chemicals and are renewable resources. Its inherent chiral rigid tricyclic phenanthrene skeleton is unique. Its utilities in asymmetric catalysis remain to be explored. A series new amide-type chiral quaternary ammoniums bearing dehydroabietylamine were designed, and prepared by two convenient steps. Acylation of dehydroabietylamine with bromoacetyl chloride afforded amide holding bromoacetyl group in higher yields using triethyl amine as base. Subsequent quaternization reaction gave the desired amide-type chiral quaternary ammoniums. The new chiral quaternary ammoniums can be used as phase-transfer catalyst (PTC) for the transition metal-catalysed alkynylation of isatin derivatives.

Formation of asymmetric belt-like aggregates from a bio-based surfactant derived from dehydroabietic acid

The morphology and physicochemical properties of ordered molecular aggregates are closely related to surfactant molecules. Herein, a rosin-based amine oxide surfactant containing a large hydrophobic group (abbreviated R-10-AO) was synthesized from dehydroabietic acid, which is an important derivative of rosin. Cryogenic transmission electron microscopy (cryo-TEM) images and small-angle X-ray scattering (SAXS) showed that at a concentration of ∼5 mM, R-10-AO molecules formed flexible nanobelts with a thickness of only 2-3 nm. The width of these nanobelts was 50-150 nm and the length was more than 1 μm. The formation of the stable nanobelts arose from the strong van der Waals forces of the bulky hydrophobic portions of R-10-AO in solution, facilitating the stability of the asymmetrical aggregates. Rheological tests showed that the formed nanobelts were thermodynamically stable. The entanglement of these nanobelts led to significant viscoelasticity of the solutions. The zero-shear viscosity (η₀) of the R-10-AO solution reached 10 Pa s at a concentration of 5 mM, which is much greater than that of most wormlike micellar solutions. This work provides the inspirations of preparing aggregates with novel properties using natural products.

Photoresponsive Viscoelastic Solutions Based on Chiral Wormlike Micelles in Mixed Solutions Containing an Amphiphile Derived from Rosin

A novel rosin-based photoresponsive anionic amphiphile, sodium N-azophenyl maleopimaric acid imide carboxylate (AzoMPCOONa), has been successfully synthesized. Its molecular structure was characterized by ¹H and ¹³C NMR and mass spectrometry (MS). The photoisomerization of AzoMPCOONa was evaluated by ultraviolet (UV)-visible spectrometry and ¹H NMR. The structure of AzoMPCOONa could be converted between the trans and cis isomers by irradiation with UV/visible light. Importantly, a fascinating photoresponsive viscoelastic solution was prepared by mixing AzoMPCOONa and cetyltrimethylammonium bromide (CTAB). The properties of the photoresponsive viscoelastic solution were further investigated by rheology, circular dichroism (CD), and cryogenic transmission electron microscopy (cryo-TEM). Initially, the AzoMPCOONa/CTAB system was a gel-like solution composed of entangled wormlike micelles possessing the right-handed chiral structure. After UV irradiation for 10 min, the gel-like solution transformed into a slightly viscous solution, its zero-shear viscosity dramatically reduced by 2 orders of magnitude, and the aggregates were converted into rod-like micelles and spherical micelles. In addition, the right-handed chiral structure of the aggregates disappeared. These dramatic changes in the viscosity and the aggregate structure can be attributed to the photoisomerization of the azobenzene group in AzoMPCOONa, which led to changes in the molecular geometry and the packing parameter of the AzoMPCOONa/CTAB system. Interestingly, the right-handed chiral structure of wormlike micelles also is photoresponsive. The results reveal the superiority of forest resources for preparing viscoelastic solutions.

pH-responsive pickering foam created from self-aggregate polymer using dynamic covalent bond

HYPOTHESIS

Responsive surfactant systems based on dynamic covalent bond exhibit an unsatisfactory foamability and foam stability, despite their documented functionality in emulsions. As such we anticipate that the foaming performance should be improved by introducing Pickering effect, which is possible when the responsiveness of the dynamic covenant bonds controls not only the hydrophobicity of polymers but also their aggregation behavior (to form nanoparticles).

EXPERIMENTS

Here we created surface active nanoparticles made from self-aggregated polymers consisting of PAH (polyallylamine hydrochloride)-BA (benzaldehyde). The covalent imine bonds between originally hydrophilic PAH and hydrophobic BA are dynamic in that their formation and breakage is a function of solution pH, confirmed by ¹H NMR and dynamic interfacial tension measurement.

FINDINGS

At pH 7.4, a stable foam is achieved in the PAH-BA (amino to aldehyde ratio at 1:0.2) solution; while at pH 2.5, it defoams due to breakage of dynamic bonds corresponding to the measured diminishing surface activity. The reversibility of foaming-defoaming has been demonstrated by alternatively changing pH for multiple cycles, with the foaming performance persistent. The foam stability can be improved by more hydrophobic compounds e.g. at a lower amino to aldehyde ratio or using PAH-cinnamaldehyde (CA). The reversible and responsive foaming demonstrated in a Pickering system provides a new method to create novel foaming systems with properties desirable to many applications.

Highly stable and thermo-responsive gel foams by synergistically combining glycyrrhizic acid nanofibrils and cellulose nanocrystals

HYPOTHESIS

Natural saponin glycyrrhizic acid (GA) and GA nanofibrils (GNFs) are effective foaming agents for formulation of aqueous food-grade foams. Through the synergistic combination of soft semiflexible GNFs with rigid nanofiller cellulose nanocrystals (CNCs), it should be possible to create advanced composite foams with a more complex structure and diverse properties including high stability and stimuli responsiveness.

EXPERIMENTS

Foams containing mixtures of GNFs and CNCs were prepared, and their formation and stability were investigated. A range of microscopy techniques and small deformation oscillatory shear were adopted to examine the microstructure and viscoelasticity of foams, and a stabilization mechanism for highly stable foams was then established. Further, the temperature-responsive destabilization of foams was evaluated.

FINDINGS

CNCs are homogeneously distributed in the architecture and mechanically reinforce the GNF fibrillar network, leading to a highly viscoelastic composite network in the continuous phase of foams, which is the key factor responsible for their high stability. Such ultra-stable gel foams display tunable thermo-responsive behavior and a rapid on-demand destabilization upon heating by inducing a phase transition of the bulk composite network. Our work opens up new scenarios on the use of a novel combination of all-natural, sustainable nanoscale building blocks to develop aqueous "superfoams" which are highly stable, stimulable and processable.