Simultaneous removal of Hg2+, Pb2+ and Cd2+ from aqueous solutions on multifunctional MoS2

Highly selective recovery of gold and silver from E-waste via stepwise electrodeposition directly from the pregnant leaching solution enabled by the MoS2 cathode

The recycling of electronic waste, i.e., waste Printed Circuit Boards (WPCBs), provides substantial environmental and economic advantages. In fact, the concentration of valuable precious and base metals in WPCBs is even higher compared to those found in mined ores. Nevertheless, it is still challenging to selectively extract precious metals with low concentrations from the pregnant leaching solution, due to the co-deposition of base metals, like Cu, which have higher concentrations. In this research, stepwise recovery of precious metals and copper directly from WPCBs thiosulfate leaching solution was facilitated by the Ti cathode coated with MoS2 (MoS2/Ti). The in-situ enrichment of Au(S2O3)23- and Ag(S2O3)23- at the surface of MoS2 enables the high efficiency and selectivity of electrodeposition, which has been confirmed through COMSOL Multiphysics simulations and visualization. As a result, the first-step electrodeposition at 0.6 V recovered 92.44 % Au and 98.18 % Ag without any co-deposition of Cu. Subsequently, the second-step recovery employed a constant current of 0.03 A, achieving 100 % recovery of copper within 12 h. Furthermore, this study optimized the reduction potential, NH3·H2O concentration, and S2O32- concentration for the stepwise electrodeposition process. These findings provide valuable insights for establishing a closed loop circular economy in the electronics industry.

A review on recent advancements on removal of harmful metal/metal ions using graphene oxide: Experimental and theoretical approaches

Graphene oxide is a two-dimensional carbon nanomaterial and has gained huge popularity over the last decade. Because, the graphene oxide can be dispersed in water easily and it is one of the most researched two-dimensional materials in the current time. The extraordinary properties shown by graphene oxide (GO) are due to its unique chemical structure; includes various hydrophilic functional groups containing oxygen such as carboxyl, hydroxyl, carbonyl and tiny sp² carbon domains surrounded by sp³ domains. These groups are very peculiar for various applications as they allow covalent functionalisation with a plethora of compounds. Large surface area, intrinsic fluorescence, excellent surface functionality, amphiphilicity, improved conductivity, high adsorption capacity and superior biocompatibility are some of the chemical properties have drawn research from various fields. Graphene oxide has various interactions such as coordination, chelation, hydrogen bonding, electrostatic interaction, hydrophobic effects, π-π interaction, acid base interaction etc., with various metal ions. This review is focused on the removal of metals and metal ions due to their interactions mentioned above. Further, potential of composites of graphene oxide in the removal of metal and metal ions is also discussed. Further, the current challenges in this field at industrial-scale are also discussed.

Highly efficient Hg2+ removal via a competitive strategy using a Co-based metal organic framework ZIF-67

The stronger coordination ability of mercury ions with organic ligands than the metal ions in metal organic framework (MOFs) provides an accessible way to separate mercury ions from solution using specific MOFs. In this study, a Co-based MOF (ZIF-67, Co(mIM)₂) was synthesized. It did not introduce specific functional groups, such as -SH and -NH₂, into its structure through complicated steps. It separate Hg²⁺ from wastewater with a new strategy, which utilized the stronger coordination ability of Hg²⁺ with the nitrogen atom on the imidazole ring of the organic ligand than the Co²⁺ ions. Hg²⁺ replaced Co²⁺ nodes from ZIF-67 and formed a more stable precipitate with mIM. The experimental results showed that this new strategy was efficient. ZIF-67 exhibited Hg²⁺ adsorption capacity of 1740 mg/g, much higher than the known MOFs sorbents. mIMs is the reaction center and ZIF-67 can improve its utilization. The sample color faded from purple to white due to the loss of cobalt ion. It is a great feature of ZIF-67 that allows users to judge whether the sorbent is deactivated intuitively. ZIF-67 can be sustainable recycled by adding organic ligands to the solution after treatment due to its simple synthesis method at room temperature. It's a high-efficient and sustainable sorbent for Hg²⁺ separation from wastewater.

Construction of MoS2@Activated Alumina Beads as Catalysts for Rapid Gold Recovery from Au(S2O3)23- Solution

Gold recovery from thiosulfate leaching solution Au(S₂O₃)₂^3- is regarded as a tough task because of the low efficiency and complex procedure in current technology, which hindered the industrial application of this eco-friendly technique. In this work, a MoS₂@activated alumina bead composite (MoS₂@AA) was constructed through a simple hydrothermal anchoring method and served as a catalyst to recover gold from Au(S₂O₃)₂^3- solution for the first time. The microstructure and chemical component of MoS₂@AA were systematically analyzed. In addition, batch experiments were carried out to explore the recovery behavior of Au(S₂O₃)₂^3- (concentration: 10 to 200 ppm). Ascribing to the extraordinary optical property of MoS₂@AA, Au(S₂O₃)₂^3- could be directly reduced to Au⁰ by photogenerated electrons and then form a two-phase interface of gold/MoS₂@AA. As a result, the recovery of Au(S₂O₃)₂^3- can reach up to 98% on MoS₂@AA, which was much higher than traditional methods. More importantly, the reduced Au⁰ could be desorbed from MoS₂@AA through a supersonic method, achieving one-step Au⁰ recovery from Au(S₂O₃)₂^3-. This novel strategy used in this research has great significance to the development of Au(S₂O₃)₂^3- recovery in the future.

Tuning phase compositions of MoS2 nanomaterials for enhanced heavy metal removal: performance and mechanism

Two-dimensional MoS₂ nanosheets have shown great potential in heavy metal remediation due to their unique properties. MoS₂ has two primary phases: 1T and 2H. Each has different physiochemical properties, but the impact of these differences on the overall material's heavy metal removal performance and associated mechanisms is rarely reported. In this study, we synthesized morphologically similar but phase-distinct MoS₂ samples via hydrothermal synthesis, which comprised dominantly either a metallic 1T phase or a semiconducting 2H phase. 1T-MoS₂ samples exhibited higher removal capacities for Ag⁺ and Pb²⁺ cations relative to 2H-MoS₂. In particular, an eight-fold increase in the Pb²⁺ adsorption capacity was observed in the 1T-MoS₂ samples (i.e. ∼632.9 mg g^-1) compared to the 2H-MoS₂ samples (∼81.6 mg g^-1). The mechanisms driving the enhanced performance of 1T-MoS₂ were investigated through detailed characterization of metal-laden MoS₂ samples and DFT modelling. We found that 1T-MoS₂ intrinsically had a larger interlayer spacing than 2H-MoS₂ because water molecules were retained between the hydrophilic 1T nanosheets during hydrothermal synthesis. The widened interlayer spacing in 1T-MoS₂ allowed the diffusion of heavy metal ions into the nanochannels, increasing the number of adsorption sites and total removal capacities. On the other hand, DFT modelling revealed the energy-favorable adsorption complex of Ag⁺ and Pb²⁺ for 1T-MoS₂, in which each metal atom was bonded with three S atoms leading to much higher adsorption energies relative to 2H-MoS₂ for Ag⁺ and Pb²⁺. This study unravels the underlying mechanisms of phase-dependent heavy metal remediation by MoS₂ nanosheets, providing an important guide for the use of 2D nanomaterials in environmental applications which include heavy metal removal, contaminant sensing, and membrane separation.

Alkynyl functionalized MoS2 mesoporous materials with superb adsorptivity for heavy metal ions

Effective elimination of heavy metal ions from water is an arduous task for their toxic effects to aquatic ecosystem and human health. Herein, a novel alkynyl functionalized molybdenum disulfide (C-MoS₂) is fabricated via mechanochemical method with well interlayered spacing, meso porosity, and high surface area (~211 m²g^-1). Mineral MoS₂ was first peeled mechanically and oxidized in situ to MoS_2-xO_x, and then reduced by ball milling with CaC₂ to form the C-MoS₂ composite. The as-obtained C-MoS₂ shows extraordinary adsorptivity for heavy metal ions, viz. 1194 mg-Hg g^-1 (Hg(NO₃)₂ solution, pH= 5, 303.15 K, equilibrium Hg(II) concentration Ce= 36.9 μg·g^-1, ionic strength I= 17.2 mmolL^-1), and 442.3 mg-Pbg^-1 (Pb(NO₃)₂ solution, pH= 5, 303.15 K, equilibrium Pb(II) concentration Ce= 46.9μgg^-1, I= 5.8 mmolL^-1), respectively, along with excellent recyclability, representing one of the best sorbents till now. The adsorption isotherms of Hg(II) followed the Langmuir model and the adsorption kinetics followed the pseudo-second-order model. The adsorption is an endothermic and entropy driven spontaneous process. The excellent adsorption performance of C-MoS₂ is attributed to its very high S-content, availability, and soft acid-base interaction with mercury and lead anions. The C-MoS₂ is an advanced sorbent for Hg(II) and Pb(II) with excellent adsorption performance and recyclability.

Synergetic degradation of Methylene Blue through photocatalysis and Fenton reaction on two-dimensional molybdenite-Fe

The greatest problem in conventional Fenton reaction is the slow production of ROS (reactive oxygen species) because of the inefficient Fe³⁺/Fe²⁺ conversion. Based on the extraordinary photo-response property of two-dimensional molybdenite (2DM), photogenerated electrons can be easy separated to accelerate the regeneration of Fe²⁺. In this work, Fe²⁺-anchored 2DM (2DM-Fe) was prepared and used as a heterogeneous Fenton catalyst to investigate the degradation efficiency to Methylene Blue (MB) in the presence of light. According to experimental results, 2DM-Fe exhibited extraordinary catalytic activity in MB elimination, which ascribed to the synergetic effect of photogenerated carriers and anchored Fe²⁺ to H₂O₂ activation. In addition, 2DM-Fe showed nearly 100% degradation efficiency to MB within 5 cycles with slight leaching amount of Mo and Fe ions, implying the strong stability and reusability in H₂O₂ system. Furthermore, the influences of H₂O₂ and 2DM-Fe dosages, pH values as well as the degradation efficiency to different dyes were also investigated. According to quenching experiments and EPR (electron paramagnetic resonance) test, the degradation mechanism of MB mainly ascribed to the oxidation of HO• and •O₂^-. This finding provides a novel strategy to design rational Fenton catalyst and has great significance to water remediation in the future.

A universal route to fabricate bacterial cellulose-based composite membranes for simultaneous removal of multiple pollutants

A self-standing, robust bacterial cellulose (BC)-based multifunctional composite membrane embedded with desirable nano-adsorbents has been successfully fabricated via a facile versatile strategy. As expected, the developed BC-based composite membrane enables the simultaneous and efficient removal of multiple co-existing pollutants.

Construction of 2D/2D MoS2/g-C3N4 Heterostructures for Photoreduction of Cr (VI)

2D/2D MoS₂/g-C₃N₄ (MCN) surface heterostructures were created by second thermal polymerization of bulk g-C₃N₄ and the reaction of thiourea and MoO₃ at 670 °C. MoS₂ networks grew vertically along the (002) facet on superior thin g-C₃N₄ nanosheets. The layered heterostructures drastically improved the Cr(VI) removal ability. In the dark case, 27% of Cr(VI) was removed within 45 min. The result indicates that the adsorption of Cr(VI) was a chemical adsorption process involving the sharing and transfer of electrons. The equilibrium data indicate that the adsorbent was covered with a monolayer adsorbate, which conformed to the Langmuir isotherm model (R² = 0.9618). In addition, MCN nanocomposites could convert Cr(VI) into non-toxic Cr(III) by photoreduction under visible light irradiation. With an optimized composition, 100% of Cr(VI) was removed within 30 min, which was ∼10 times quicker compared with Cr(VI) removal under dark conditions. Because g-C₃N₄ nanosheets (sample CN₆₇₀) with higher photocurrent density revealed the lowest photoreduction Cr(VI) ability, adsorption plays an important role in Cr(VI) removal. For MoS₂/g-C₃N₄ nanocomposites used in Cr(VI) removal, adsorption and photoreduction were incorporated together to get excellent performance.

Transition Metal Dichalcogenide-Silk Nanofibril Membrane for One-Step Water Purification and Precious Metal Recovery

With the rapid worldwide industrial development, large amounts of pollutants such as heavy metals are discharged into the water sources, causing a huge threat to living beings. To mitigate this issue, there is an urgent need for new water treatment strategies. Inspired by a natural shell nacre structure and a multidimensional hybrid concept, we demonstrate multilayered inorganic-organic hybrid membranes using metallic molybdenum disulfide (MoS₂) as two-dimensional transition metal dichalcogenide nanosheets and one-dimensional silk nanofibrils for water purification. Because of its possessing negatively charged layers and interaction sites, the hybrid film could adsorb metal ions and dyes from water. The separation performance can be tuned by changing the component ratios of these two nanomaterials. During filtration, due to the reducing effect of the MoS₂ nanosheets, precious metal ions are reduced to their nanoparticle form without any further thermal or chemical treatments. In addition to the one-step removal and recovery of metal ions, the hybrid membranes exhibit excellent potential for the determination and removal of different dyes from water. The results of this research can open up an effective and green avenue for water purification and recovery of metal ions dissolved in water.