The study of hexanoate-based protic ionic liquids used as lubricants in steel-steel contact

Tribological Properties of Ti6Al4V Titanium Textured Surfaces Created by Laser: Effect of Dimple Density

The loss of energy due to friction is one of the major problems industries are facing nowadays. Friction and wear between sliding components reduce the mechanical efficiency of machines and have a negative impact on the environment. In recent years, surface texturing has shown tremendous ability to reduce friction and wear. Micro-features generated on surfaces act as a secondary reservoir for lubricants and wear debris receptacles to further reduce abrasion. In addition, surface texturing boosts hydrodynamic pressure, which increases the elasto-hydrodynamic lubrication regime of the Stribeck curve, reducing friction and wear. Amongst all different techniques to texture surfaces, laser texturing is the most popular due to its advantages such as high accuracy, good consistency and celerity as compared to other techniques. This study investigated the effect of laser texturing on the tribological properties of Ti6Al4V in contact with a ceramic ball. The effect of varying the dimple density on friction and wear was studied using a ball-on-flat reciprocating tribometer under lubricated conditions. Results show that friction and wear were reduced for all the textured samples as compared to an untextured sample, with important friction and wear reductions for the samples with the highest dimple densities. For samples with intermediate dimple densities, the friction coefficient stayed low until the dimples wore out from the surface and then increased to a value similar to the friction coefficient of the untextured surface. The dimple wear-out time observed in these specimens was greatly influenced by the dimple density.

Synthesis and investigation of phosphorus-free ionic liquids as multifunctional lubricating additives

Two phosphorus-free multifunctional protic ionic liquids were devolpoed for lubricating additives. The low corrosion, excellent tribological behavior and antioxidation property make them suitable as multifunctional additives in various lubricants.

Thermophysical Properties of Newly Synthesized Ammonium-Based Protic Ionic Liquids: Effect of Temperature, Anion and Alkyl Chain Length

Ionic liquids which are often classified as low melting point salts have received significant attention from research groups and industries to be used in a wide range of applications. Many of these applications require thorough knowledge on the thermophysical properties of the ionic liquids before utilizing their full potentials in various fields. In this work, a series of alkylammonium cation and carboxylate anion-based room temperature protic ionic liquids (PILs) were synthesized by varying length of alkyl chain of the cation from diethyl to dibutyl combined with pentanoate, hexanoate and heptanoate anions. These ammonium-based PILs named as diethylammonium pentanoate [DEA][C5], diethylammonium hexanoate [DEA][C6], diethylammonium heptanoate [DEA][C7], dibutylammonium pentanoate [DBA][C5], dibutylammonium hexanoate [DBA][C6] and dibutylammonium heptanoate [DBA][C7] were characterized using Nuclear Magnetic Resonance (NMR) spectroscopy. The thermophysical properties of the PILs namely density, dynamic viscosity and refractive index were measured and analyzed. Density, ρ and dynamic viscosity, η were determined at T = (293.15 to 363.15) K and refractive index, nD was measured at T = (293.15 to 333.15) K. The fitting parameters are proposed for the empirical correlations of density, dynamic viscosity and refractive index. The values of thermal expansion coefficient, αp, molecular volume, Vm, standard entropy, S° and lattice potential energy, Upot also have been calculated by using the specified equations. The thermal decomposition temperature, Td was also determined using a thermogravimetric analyzer (TGA) while the differential scanning calorimetry (DSC) technique provided the glass transition, Tg, melting point, Tm and crystallization, Tc temperatures of the PILs. The experimental results revealed that the dependency of the experimental values namely the ρ, η, nD, and Td on the alkyl chain of the anion, size of the cations and the temperature of measurement.