Foam fractionation for the recovery of proanthocyanidin from Camellia seed shells using molecular imprinting chitosan nanoparticles as collector

Development of a molecularly imprinted polymer-based electrochemical sensor with metal-organic frameworks for monitoring the antineoplastic drug vismodegib

A novel and robust electrochemical sensing tool for the determination of vismodegib (VIS), an anticancer drug, has been developed by integrating the selective recognition capabilities of molecularly imprinted polymer (MIP) and the sensitivity enhancement capability of metal-organic framework (MOF). Prior to this step, the electrochemical behavior of VIS was investigated using a bare glassy carbon electrode (GCE). It was observed that in 0.5 M H2SO4 solution as electrolyte, VIS has an oxidation peak around 1.3 V and the oxidation mechanism is diffusion controlled. The determination of VIS in a standard solution using a bare GCE showed a linear response in the concentration range from 2.5 μM to 100 μM, with a limit of detection (LOD) of 0.75 μM. Since sufficient sensitivity and selectivity could not be achieved with bare GCE, a MIP sensor was developed in the next step of the study. For this purpose, the GCE surface was first modified by drop casting with as-synthesized Co-MOF. Subsequently, a MIP network was synthesized via a thermal polymerization approach using 2-acrylamido-2-methylpropanesulfonic acid (AMPS) as monomer and VIS as template. MOFs are ideal electrode materials due to their controllable and diverse morphologies and modifiable surface properties. These characteristics enable the development of MIPs with more homogeneous binding sites and high affinity for target molecules. Integrating MOFs could help the performance of sensors with the desired stability and reproducibility. Electrochemical analysis revealed an observable enhancement of the output signal by the incorporation of MOF molecules, which is consistent with the sensitivity-enhancing role of MOF by providing more anchoring sites for the attachment of the polymer texture to the electrode surface. This MOF-MIP sensor exhibited impressive linear dynamic ranges ranging from 0.1 to 1.0 pM for VIS, with detection limits in the low picomolar range. In addition, the MOF-MIP sensor offers high accuracy, selectivity and precision for the determination of VIS, with no interference observed from complex media of serum samples. Additionally, in this study, Analytical GREEnness metric (AGREE), Analytical GREEnness preparation (AGREEprep) and Blue Applicability Grade Index (BAGI) were used to calculate the green profile score.

The construction of highly selective surface molecularly imprinted polymers based on Cu(II) coordination for the detection of bisphenol A

Herein, we designed and constructed a highly selective MIPs for bisphenol A (BPA) named Cu-MIPs@CS based on Cu(II) coordination. The synthesis of Cu-MIPs@CS employed a dummy template strategy and surface imprinting technology, with chitosan (CS) as the substrate linked to imprinted layers via Cu2+ bridging. 4-vinylpyridine acted as the functional monomer, capable of forming a complex with the template ketoprofen, while ethylene glycol dimethacrylate served as the cross linker. Cu-MIPs@CS exhibited a significantly enhanced imprinting factor of 14.78 for BPA, which was approximately 6.6 times higher than that of imprinted materials without Cu2+ (MIPs@CS). Cu-MIPs@CS exhibited a selective factor of 12.74 towards resorcinol, which possessed identical functional groups but a smaller size than BPA, representing an enhancement of selectivity by 12.25-fold compared to MIPs@CS. More importantly, Cu-MIPs@CS exhibited a superior discrimination ability between BPA and its structural analogue, diphenolic acid, with an excellent selective factor of 2.93, highlighting its significance in distinguish the structural analogue of BPA. In contrast, MIPs@CS lack sufficient selectivity to differentiate between them. Through exploration of adsorption mechanism of Cu-MIPs@CS, it was demonstrated that the incorporation of Cu2+ significantly reduced nonspecific adsorption, but also facilitated the creation of more selective imprinted cavities by introducing metal coordination, thereby notably enhancing the selectivity of Cu-MIPs@CS. Finally, the developed Cu-MIPs@CS were applied as the solid phase extraction adsorbent and combined with HPLC-DAD detection to establish an analytical method towards BPA in drinking water samples. The limit of detection of the method was 0.14 μg L-1 and recoveries ranged from 95.6 % to 101 %. This work provided broad prospects for construction of highly selective MIPs and accurate quantification of trace amounts of BPA.

Extraction of pigments from camellia seed husks and their application on silk fabrics

To reuse camellia husk waste and expand the scope of natural dyes, this research proposes pigment extraction from camellia husks and investigates various properties when applied on silk fabrics. Single-factor experiments were used to screen and optimize the dyeing process. The extracted pigments and dyed fibers were analyzed and characterized by LC-MS, FTIR and SEM, respectively. Six metal mordants were compared with each other, and their possible mordanting mechanisms were proposed. Color fastness, UV resistance, and antioxidant and antibacterial properties were evaluated after dyeing. The results showed that the optimal dyeing process was as follows: dyestuff mass 50 g L-1, holding time 45 min, bath pH 3.0, holding temperature 100 °C. LC-MS and FTIR results showed that the pigments in the extracts were mainly dimeric and multimeric procyanidins. Metal ion addition increased the K/S value while the pre-mordanting method had a superior dyeing depth. The rubbing and washing fastness of the dyed fabric were all above grade 4.0. Meanwhile, the dyed sample exhibited favorable UV resistance, and antioxidant and antibacterial properties, including a UPF index of 63.4 and an inhibition rate of 98.74% and 97.39% for S. aureus and E. coli, respectively.