Basic Orange 21: A molecular rotor probe for fluorescence turn-on sensing of amyloid fibrils

A turn-on fluorescence sensor for detection of heparinase with heparin templated aggregation of tetracationic porphyrin derivative

Heparinase is the only mammalian endoglycosidase that breaks down the commonly used blood-anticoagulant heparin into therapeutically relevant low-molecular-weight-heparin. Importantly, heparinase has been considered a malignant disease diagnostic marker. Thus, it is essential to develop detection scheme for heparinase. However, optical methods for heparinase determination are limited. In the present work, we report a turn-on fluorescence sensor for detection of heparinase that utilizes heparin-templated aggregation of a tetra-cationic porphyrin derivative, TMPyP4+, as a sensing framework. Heparinase cleaves the glycosidic linkage between hexosamine and uronic acid in the structure of heparin to destroy its polyelectrolytic nature that originally causes the aggregation of TMPyP4+. Thus, heparinase leads to dissociation of TMPyP4+ aggregates and generates an optical signal. This system leads to a sensitive and selective response towards heparinase with a Limit of Detection (LOD) of 0.3 pmol/L. Further, the same system is demonstrated to sense a trace amount of Oversulfated Chondrootin Sulphate (OSCS) in heparin, which is a heparin adulterant, by utilizing the fact that OSCS serves as an inhibitor for heparinase activity, which leads to reverse modulation in the photo-physical features of the monomer/aggregate equilibrium of the TMPyP4+-heparin-heparinase system. The sensing mechanism has been thoroughly demonstrated by ground-state absorption, steady-state emission, and time-resolved emission measurements. The selectivity of the sensor was tested using lysozyme, α-amylase, pepsin, trypsin, lipase, and glucose oxidase in the heparinase selectivity study and the method is also validated using another method reported in the literature. The study provides a new approach for the development of optical methods for the detection of heparinase and oversulfated chondroitin sulfate, which is currently limited.

A Flexible Bivalent Approach to Comprehensively Improve the Performances of Stilbazolium Dyes as Amyloid-β Fluorescent Probes

Exploring new ways to reconstruct the structure and function of inappropriate organic fluorophores for improving amyloid-β (Aβ) fluorescent imaging performance is desired for precise detection and early diagnosis of Alzheimer's disease (AD). With stilbazolium dyes as examples, here, we present a multipronged approach to comprehensively improved the Aβ fluorescent imaging performance through a flexible bivalent method, where a flexible carbon chain was introduced to link two monomers to form a homodimer. Our results reveal a mechanism wherein the flexible linker creates a well-defined probe with specific orientations and distinct photophysical properties. Applying this approach in combination with theoretical simulation, the homodimers exhibited a comprehensive improvement of the Aβ fluorescent imaging performance of the dye monomers, including better photostability and higher signal-to-noise (S/N) ratio, higher "off-on" near-infrared fluorescence (NIRF) response sensitivity, higher specificity and affinity to Aβ deposits, and more reasonable lipophilicity for blood-brain barrier (BBB) penetrability. The results demonstrate that flexible homodimers offer a multipronged approach to obtaining high-performance NIRF imaging reagents for the detection of Aβ deposits both in vitro and in vivo.

A highly sensitive hemicyanine-based near-infrared fluorescence sensor for detecting toxic amyloid aggregates in human serum

The development of an accurate and sensitive sensor for detecting amyloid plaques, which are responsible for many protein disorders like Alzheimer's disease, is crucial for early diagnosis. Recently, there has been a notable increase in the development of fluorescence probes that exhibit emission in the red region (>600 nm), aiming to effectively tackle the challenges encountered when working with complex biological matrices. In the current investigation, a hemicyanine-based probe, called LDS730, has been used for the sensing of amyloid fibrils, which belong to the Near-Infrared Fluorescence (NIRF) family of dyes. NIRF probes provide higher precision in detection, prevent photo-damage, and minimize the autofluorescence of biological specimens. The LDS730 sensor emits in the near-infrared region and shows a 110-fold increase in fluorescence turn-on emission when bound to insulin fibrils, making it a highly sensitive sensor. The sensor has an emission maximum of ~710 nm in a fibril-bound state, which shows a significant red shift along with a Stokes' shift of ~50 nm. The LDS730 sensor also displays excellent performance in the complicated human serum matrix, with a limit of detection (LOD) of 103 nM. Molecular docking calculations suggest that the most likely binding location of LDS730 in the fibrillar structure is the inner channels of amyloid fibrils along its long axis, and the sensor engages in several types of hydrophobic interactions with neighboring amino acid residues of the fibrillar structure. Overall, this new amyloid sensor has great potential for the early detection of amyloid plaques and for improving diagnostic accuracy.

Mitochondria-Directing Fluorogenic Probe: An Efficient Amyloid Marker for Imaging Lipid Metabolite-Induced Protein Aggregation in Live Cells and Caenorhabditis elegans

The design and development of optical probes for sensing neurotoxic amyloid fibrils are active and important areas of research and are undergoing continuous advancements. In this paper, we have synthesized a red emissive styryl chromone-based fluorophore (SC1) for fluorescence-based detection of amyloid fibrils. SC1 records exceptional modulation in its photophysical properties in the presence of amyloid fibrils, which has been attributed to the extreme sensitivity of its photophysical properties toward the immediate microenvironment of the probe in the fibrillar matrix. SC1 also shows very high selectivity toward the amyloid-aggregated form of the protein as compared to its native form. The probe is also able to monitor the kinetic progression of the fibrillation process, with comparable efficiency as that of the most popular amyloid probe, Thioflavin-T. Moreover, the performance of SC1 is least sensitive to the ionic strength of the medium, which is an advantage over Thioflavin-T. In addition, the molecular level interaction forces between the probe and the fibrillar matrix have been interrogated by molecular docking calculations which suggest the binding of the probe to the exterior channel of the fibrils. The probe has also been demonstrated to sense protein aggregates from the Aβ-40 protein, which is known to be responsible for Alzheimer's disease. Moreover, SC1 exhibited excellent biocompatibility and exclusive accumulation at mitochondria which allowed us to successfully demonstrate the applicability of this probe to detect mitochondrial-aggregated protein induced by an oxidative stress indicator molecule 4-hydroxy-2-nonenal (4-HNE) in A549 cell lines as well as in a simple animal model like Caenorhabditis elegans. Overall, the styryl chromone-based probe presents a potentially exciting alternative for the sensing of neurotoxic protein aggregation species both in vitro as well as in vivo.

Turn-on fluorescence probing of amyloid fibrils by the proto-berberine alkaloids and the study of their interactions

The aggregation of amyloid proteins is highly related to the occurrence and development of neurodegenerative and metabolic diseases. The detection of amyloid fibrils or monitoring fibrillation process would be necessary to understand the fundamental knowledge about the diseases and further facilitate the research for the drug discovery and disease treatment. In this study, three proto-berberine alkaloids, i.e. berberine, palmatine and coptisine, were examined as three distinctive fluorescent probes to detect amyloid fibrils. These three alkaloids were found to be sensitive to the microenvironment, i.e. viscosity and polarity, with varied fluorescence intensity. They could sensitively probe insulin and lysozyme fibrils with turn-on fluorescence, but did not respond to protein monomers, merited with advantages of larger Stokes shift, greenish-yellow fluorescence and no interference with the fibrillation process. Hydrophobic, electrostatic and hydrogen bond interactions were explored to exist between alkaloids and the fibrils. Moreover, these alkaloids succeeded in monitoring the aggregation process of amyloid proteins in vitro and imaging the fibrils in living cells. The present study demonstrates that the three alkaloids could be the potential candidate fluorescent probes for amyloid fibrils.

Monitoring Amyloidogenesis with a 3D Deep-Learning-Guided Biolaser Imaging Array

Amyloidogenesis is a critical hallmark for many neurodegenerative diseases and drug screening; however, identifying intermediate states of protein aggregates at an earlier stage remains challenging. Herein, we developed a peptide-encapsulated droplet microlaser to monitor the amyloidogenesis process and evaluate the efficacy of anti-amyloid drugs. The lasing wavelength changes accordingly with the amyloid peptide folding behaviors and nanostructure conformations in the droplet resonator. A 3D deep-learning strategy was developed to directly image minute spectral shifts through a far-field camera. By extracting 1D color information and 2D features from the laser images, the progression of the amyloidogenesis process could be monitored using arrays of laser images from microdroplets. The training set, validation set, and test set of the multimodal learning model achieved outstanding classification accuracies of over 95%. This study shows the great potential of deep-learning-empowered peptide microlaser yields for protein misfolding studies and paves the way for new possibilities for high-throughput imaging of cavity biosensing.

Two-photon excited lasing for detection of amyloids in brain tissue

Two-photon excitation of emissive markers with near-infrared (NIR) light is of a particular interest for imaging in biology and medicine because NIR light is relatively weakly absorbed and scattered by tissues. At the same time the mechanism of two-photon absorption allows excitation of molecules located deep inside a scattering medium. In this work we demonstrate that the two-photon excitation combined with the effect of light amplification in the stimulated emission process provides a sensitive method for detecting amyloids of different forms. We investigate the two-photon excited amplified spontaneous emission (ASE) of a fluorescent dye, coumarin 307, in the brain tissue infiltrated with various amyloid phantoms i.e. oligomers, protofibrils and mature fibrils. All these forms of amyloids can be detected by observation of ASE and determination of thresholds for light amplification. On this basis we suggest that a relatively simple extension of currently used emission-based optical spectroscopy techniques can provide key information on pathogenic amyloid structures in tissue.

Host-Assisted Aggregation-Induced Emission of a Tetraphenylethylene Derivative and Its Responses toward External Stimuli

Aggregation-induced emission (AIE) of fluorogenic dyes offers many opportunities as smart materials, fluorescence sensing of analytes, bioimaging, molecular electronics, and many others. AIE dyes (called AIEgens) produce emission through aggregation, which are more advantageous than conventional emission of monomeric fluorophores, as the latter is unduly susceptible toward various quenching processes. Here, we report AIE enhancement of a polyanionic sulfonato-tetraphenylethylene (SuTPE) derivative, achieved through supramolecularly assisted dye aggregation, as SuTPE interacts with a multicationic amino-β-cyclodextrin (AβCD) host. Aggregation of the dye is induced mainly because of strong electrostatic interaction of SuTPE with AβCD, causing a significant extent of charge neutralization for the polyanionic dyes, helping their assemblage at the multicationic host portal. Job's plot studies suggest preferential formation of 2:1 dye-to-host stoichiometric complexes in the present system. Ionic-strength-dependent studies nicely support the involvement of electrostatic interaction in the present system through salt-induced disintegration of the SuTPE-AβCD complexes. The AIE enhancement for the SuTPE-AβCD system is very sensitive to the external stimuli, such as pH and temperature, suggesting its prospects in various stimuli-responsive applications. Furthermore, the SuTPE-AβCD system can suitably quantify an important bioanalyte, ATP, following a competitive binding strategy, suggesting its potential application as a supramolecular biosensor.

Three-step Förster resonance energy transfer on an amyloid fibril scaffold

The present study provides evidence that the energy transfer chain consisting of the benzothiazole dye Thioflavin T as an input donor, a phosphonium dye TDV and a squaraine dye SQ4 as mediators, and one of the three squaraines SQ1/2/3 as an output acceptor displays an excellent amyloid-sensing ability when applied to differentiating between the amyloid and non-fibrillized states of insulin. The ensemble of fluorophores offers the advantages of a large effective Stokes shift (∼240 nm), well-resolved 3D fluorescence patterns and strong enhancement of the terminal fluorescence (up to two orders of magnitude). The occurrence of multistep energy transfer on an amyloid fibril scaffold opens new possibilities for the more sensitive detection of fibrillar protein assemblies and their applications in nanophotonics.

Supramolecular tuning of thioflavin-T aggregation hosted by polystyrene sulfonate

Tunable and controllable emission is an extremely desirable feature for advanced functional materials that finds usage in optoelectronic utilization, fluorescence probing/sensing, drug-delivery monitoring, etc. In the present contribution, we have employed a macrocyclic host molecule, sulfobutyl ether-β-cyclodextrin (SBE-β-CD), as a tuning agent for an intensely emissive aggregate assembly of a molecular rotor dye, thioflavin-T (ThT), in the presence of an anionic polyelectrolyte, polystyrene sulfonate (PSS). The macrocyclic host breaks the PSS templated ThT aggregates and leads to encapsulation of released ThT molecules, tailoring the emission response of the system in terms of intensity and wavelength. Utilizing the established selectivity of the cyclodextrin-adamantane system, reverse control of this tunable emission has been further achieved. The controllable fluorescence system has been extensively investigated using ground-state absorption, steady-state and time-resolved emission spectroscopy. This kind of supramolecular tailoring of self-assembled aggregate emission has enormous potential in the field of fluorescence sensors and probes, and imaging and tracking in biological systems.

Anionic Polyelectrolyte-Induced Aggregation of Basic Orange 21: A Clue toward Metachromasia

The change in the color of chromophore upon being embedded in a biological tissue is known as metachromasia. Basic Orange 21 (BO21) is a cationic polymethine dye that has been implied as a supravital dye, which produces metachromasia in leukocytes. An improved differential counting of leukocytes has been achieved in the clinical setup based on characteristic metachromatic expressions of BO21 for different types of leukocytes. Although BO21 has been utilized as a chromatic indicator for leukocyte counting, there are limited number of investigations that focus on the factors that may be responsible for the spectral shift in absorption and emission spectra of BO21, which leads to its metachromatic behavior. In this work, we have investigated the effect of a synthetic anionic polyelectrolyte, polystyrene sulfonate (PSS), on the photophysical properties of BO21, using steady-state emission, ground-state absorption, and time-resolved emission measurements, to get an understanding of the factors that may be responsible for the spectral shift of BO21 in the cellular environment. PSS induces aggregation of BO21 molecules with large changes in its photophysical properties; this appears to be most likely the mechanism of spectral shift for BO21 reported in the cellular environment. The employment of external stimulus reveals BO21 aggregates to be significantly responsive toward external stimuli, for example, temperature and presence of salt in the medium, which further strengthens the proposal of aggregate formation. Further, we have also employed fluorescence upconversion spectroscopy with subpicosecond time resolution to estimate the excited-state lifetime of BO21.

Supramolecular Control on the Optical Properties of a Dye-Polyelectrolyte Assembly

Control of fluorescent molecular assemblies is an exciting area of research with large potential for various important applications, such as, fluorescence sensing/probing, cell imaging and monitoring drug-delivery. In the present contribution, we have demonstrated control on the extent of aggregation of a dye-polyelectrolyte assembly using a macrocyclic host molecule, sulfobutylether-β-cyclodextrin (SBE-β-CD). Initially, a cationic molecular rotor based organic dye, Auramine-O (AuO), undergoes aggregation in the presence of an anionic polyelectrolyte, polystyrene sulfonate (PSS), and displays a broad intense new emission band along with large variation in its absorption features and excited-state lifetime. A manipulation of the monomer-aggregate equilibrium of the dye-polyelectrolyte assembly has been achieved by introducing a cyclodextrin based supramolecular host, SBE-β-CD, which leads to relocation of AuO molecules from polyelectrolyte (PSS) to supramolecular host cavity, owing to the formation of a host-guest complex between AuO and SBE-β-CD. A reversible control on this manipulation of monomer-aggregate equilibrium is further achieved by introducing a competitive guest for the host cavity i. e., 1-Adamantanol. Thus, we have demonstrated an interesting control on the dye-polyelectrolyte aggregate assembly using a supramolecular host molecule which open up exciting possibilities to construct responsive materials using a repertoire of various host-specific guest molecules.

A colorimetric and fluorometric based dual readout approach for effective heparin sensing

Devising fluorescence-based turn-on probes for the specific and sensitive detection of Heparin is of utmost clinical importance. In this contribution, we have identified a molecular rotor based asymmetric cyanine probe, thiazole orange (TO), which enables an efficient colorimetric and fluorimetric detection of Heparin. TO undergoes the formation of emissive H-aggregates upon interaction with Heparin that display an impressive emission enhancement of ~22 fold together with drastic changes in the absorption spectra that yields a prominent colour change in the solution from orange to yellow. These seldom reported emissive H-aggregates of TO, serve as an efficient platform for Heparin detection with a LOD of 19 nM, fluorometrically and 34 nM, colorimetrically. The TO-Heparin complex is also accompanied by a large change in the excited-state lifetime. The TO-Heparin complex has been further utilized for the detection of Protamine, which is the only medically affirmed antitoxin of Heparin. Overall, our sensing system offers several advantages, such as, simple, dual read-out, economic and specific detection of Heparin with longer excitation and emission wavelength, rapid naked eye detection and utilizes an in-expensive commercially available fluoprophore, TO. Most importantly, our sensing system also displays a good performance in the biologically complex human serum matrix.