One pot synthesis of fluorescent gold nanoclusters from Curcuma longa extract for independent detection of Cd2+, Zn2+ and Cu2+ ions with high sensitivity

A Ratiometric Fluorescent Sensor for Penicillin G Based on Color-Tunable Gold-Silver Nanoclusters

Excessive administration of penicillin G and improper disposal of its residues pose a serious risk to human health; therefore, the development of convenient methods for monitoring penicillin G levels in products is essential. Herein, novel gold-silver nanoclusters (AuAgNCs) were synthesized using chicken egg white and 6-aza-2-thiothymine as dual ligands with strong yellow fluorescence at 509 and 689 nm for the highly selective detection of penicillin G. The AuAgNCs were characterized using transmission electron microscopy, X-ray photoelectron spectroscopy, ultraviolet-visible absorption spectrophotometry, and fluorescence spectrophotometry. Under optimum conditions, the fluorescence intensity decreased linearly with the concentration of penicillin G from 0.2 to 6 μM, with a low detection limit of 18 nM. Real sample analyses indicated that a sensor developed using the AuAgNCs could detect penicillin G in urine and water samples within 10 min, with the recoveries ranging from 99.7 to 104.0%. The particle size of the AuAgNCs increased from 1.80 to 9.06 nm in the presence of penicillin G. We believe the aggregation-induced quenching of the fluorescence of the AuAgNCs was the main mechanism for the detection of penicillin G. These results demonstrate the ability of our sensor for monitoring penicillin G levels in environmental and clinic samples.

Application of gold nanoclusters in fluorescence sensing and biological detection

Gold nanoclusters (Au NCs) exhibit broad fluorescent spectra from visible to near-infrared regions and good enzyme-mimicking catalytic activities. Combined with excellent stability and exceptional biocompatibility, the Au NCs have been widely exploited in biomedicine such as biocatalysis and bioimaging. Especially, the long fluorescence lifetime and large Stokes shift attribute Au NCs to good probes for fluorescence sensing and biological detection. In this review, we systematically summarized the molecular structure and fluorescence properties of Au NCs and highlighted the advances in fluorescence sensing and biological detection. The Au NCs display high sensitivity and specificity in detecting iodine ions, metal ions, and reactive oxygen species, as well as certain diseases based on the fluorescence activities of Au NCs. We also proposed several points to improve the practicability and accelerate the clinical translation of the Au NCs.

Zinc nitride quantum dots as an efficient probe for simultaneous fluorescence detection of Cu2+ and Mn2+ ions in water samples

The exceptional ascending heights of graphene (carbon) and boron nitride nanostructures have invited scientists to explore metal nitride nanomaterials. Herein, Zn3N2 quantum dots (QDs) were prepared via a simple hydrothermal route from the reaction between zinc nitrate hexahydrate and ammonia solution that possess efficient strength towards sensing applications of metal ions (Cu2+ and Mn2+). The as-prepared Zn3N2 QDs show bright fluorescence, displaying an emission peak at 408 nm upon excitation at 320 nm, with a quantum yield (QY) of 29.56%. It was noticed that the fluorescence intensity of Zn3N2 QDs linearly decreases with the independent addition of Cu2+ and Mn2+ ions, displaying good linearity in the ranges 2.5-50 µM and 0.05-5 µM with detection limits of 21.77 nM and of 63.82 nM for Cu2+ and Mn2+ ions, respectively. The probe was successfully tested for quantifying Cu2+ and Mn2+ in real samples including river, canal, and tap water, providing good recoveries with a relative standard deviation  < 2%. Furthermore, the masking proposition can successfully eliminate the interference if the two metal ions exist together. It was found that thiourea is efficiently able to mask Cu2+ and selectively quenches Mn2+, and L-cysteine is able to halt the quenching potential of Mn2+ and is selectively able to sense Cu2+. The Zn3N2 QDs provide a simple way for the simultaneous detection of both Cu2+ and Mn2+ ions in environmental samples at low sample preparations requirements.

Synthesis of Greenish-Yellow Fluorescent Copper Nanocluster for the Selective and Sensitive Detection of Fipronil Pesticide in Vegetables and Grain Samples

In this paper, a new synthetic route is introduced for the synthesis of high-luminescent greenish-yellow fluorescent copper nanoclusters (PVP@A. senna-Cu NCs) using Avaram senna (A. senna) and polyvinylpyrrolidone (PVP) as templates. A. senna plant extract mainly contains variety of phytochemicals including glycosides, sugars, saponins, phenols, and terpenoids that show good pharmacological activities such as anti-inflammatory, antioxidant, and antidiabetic. PVP is a stable and biocompatible polymer that is used as a stabilizing agent for the synthesis of PVP@A. senna-Cu NCs. The size, surface functionality, and element composition of the fabricated Cu NCs were confirmed by various analytical techniques. The as-prepared greenish-yellow fluorescent Cu NCs exhibit significant selectivity towards fipronil, thereby favoring to assay fipronil pesticide with good linearity in the range of 3.0-30 μM with a detection limit of 65.19 nM. More importantly, PVP@A. senna-Cu NCs are successfully applied to assay fipronil in vegetable and grain samples.

Dual-emissive phenylalanine dehydrogenase-templated gold nanoclusters as a new highly sensitive label-free ratiometric fluorescent probe: heavy metal ions and thiols measurement with live-cell imaging

Phenylalanine dehydrogenase (PheDH) has been proposed as an ideal protein scaffold for the one-step and green synthesis of highly efficient multifunctional gold nanoclusters. The PheDH-stabilized fluorescent gold nanoclusters (PheDH-AuNCs) with dual emission/single excitation exhibited excellent and long-term stability, high water solubility, large Stokes shift and intense photoluminescence. Selectivity studies demonstrated that the red fluorescence emission intensity of PheDH-AuNCs was obviously decreased in less than 10 min by the addition of mercury, copper, cysteine or glutathione under the single excitation at 360 nm, without significant change in the blue emission of the PheDH-AuNCs. Therefore, the as-prepared PheDH-AuNCs as a new excellent fluorescent probe were successfully employed to develop a simple, rapid, low cost, label- and surface modification-free nanoplatform for the ultrasensitive and selective detection of Hg2+, Cu2+, Cys and GSH through a ratiometric fluorescence system with wide linear ranges and detection limits of 1.6, 2.4, 160 and 350 nM, respectively which were lower than previous reports. In addition, the results showed that PheDH-AuNCs can be used for the detection of toxic heavy metal ions and small biomarker thiols in biological and aqueous samples with acceptable recoveries. Interestingly, PheDH-AuNCs also displayed a promising potential for live-cell imaging due to their low toxicity and great chemical- and photo-stability.

Perspectives of different colour-emissive nanomaterials in fluorescent ink, LEDs, cell imaging, and sensing of various analytes

In the past 2 decades, multicolour light-emissive nanomaterials have gained significant interest in chemical and biological sciences because of their unique optical properties. These materials have drawn much attention due to their unique characteristics towards various application fields. The development of novel nanomaterials has become the pinpoint for different application areas. In this review, the recent progress in the area of multicolour-emissive nanomaterials is summarized. The different emissions (white, orange, green, red, blue, and multicolour) of nanostructure materials (metal nanoclusters, quantum dots, carbon dots, and rare earth-based nanomaterials) are briefly discussed. The potential applications of different colour-emissive nanomaterials in the development of fluorescent inks, light-emitting diodes, cell imaging, and sensing devices are briefly summarized. Finally, the future perspectives of multicolour-emissive nanomaterials are discussed.

A ratiometric fluorescence sensor based on gold silver nanoclusters and tungsten disulfide quantum dots with simple fabrication for the detection of copper ions in river water

Copper plays a key role in the human body; meanwhile, excess Cu²⁺ ions can result in various diseases. Nanoclusters (NCs) are often used to measure Cu²⁺ ions, but there are two difficulties. On the one hand, a single probe of NCs is easily affected by environmental factors. On the other hand, it is difficult to mask the interference of Pb²⁺ ions and Cd²⁺ ions in the process of detecting Cu²⁺ ions. As a new type of quantum dots (QDs), tungsten disulfide quantum dots (WS₂-QDs) have some advantages of simple synthesis and stable luminescence properties. Stable WS₂-QDs with blue fluorescence are used as a reference probe, while gold silver nanoclusters (AuAgNCs) with red fluorescence are used as a response probe. A ratiometric fluorescent sensor was constructed by mixing the two styles of fluorescent probes, which is abbreviated as NCs/QDs. This nano-sensor can be used to detect the concentration of Cu²⁺ ions, in which the fluorescence of QDs does not change significantly, while the fluorescence of NCs can be quenched by Cu²⁺ ions. The concentration of Cu²⁺ ions can be determined as low as 0.12 μM with a linear range from 0.3 to 3 μM. The common interference caused by Pb²⁺ and Cd²⁺ ions can be eliminated by the phosphate buffer solution (PBS). This sensor was used to detect the concentration of Cu²⁺ in river water with satisfactory results.

Rapid Detection of Cd2+ Ions in the Aqueous Medium Using a Highly Sensitive and Selective Turn-On Fluorescent Chemosensor

Herein, a novel optical chemosensor, (CM1 = 2, 6-di((E)-benzylidene)-4-methylcyclohexan-1-one), was designed/synthesized and characterized by ¹H-NMR and FT-IR spectroscopy. The experimental observations indicated that CM1 is an efficient and selective chemosensor towards Cd²⁺, even in the presence of other metal ions, such as Mn²⁺, Cu²⁺, Co^2+, Ce³⁺, K⁺, Hg²⁺,^, and Zn²⁺ in the aqueous medium. The newly synthesized chemosensor, CM1, showed a significant change in the fluorescence emission spectrum upon coordination with Cd²⁺. The formation of the Cd²⁺ complex with CM1 was confirmed from the fluorometric response. The 1:2 combination of Cd²⁺ with CM1 was found optimum for the desired optical properties, which was confirmed through fluorescent titration, Job's plot, and DFT calculation. Moreover, CM1 showed high sensitivity towards Cd²⁺ with a very low detection limit (19.25 nM). Additionally, the CM1 was recovered and recycled by the addition of EDTA solution that combines with Cd²⁺ ion and, hence, frees up the chemosensor.

Development of a new near-infrared, spectrophotometric, and colorimetric probe based on phthalocyanine containing mercaptoquinoline unit for discriminative and highly sensitive detection of Ag+, Cu2+, and Hg2+ ions

A new near-infrared, spectrophotometric, and colorimetric probe based on a phthalocyanine-containing mercaptoquinoline unit (MQZnPc) has been constructed and utilized for discriminative and highly selective/sensitive detection of Ag⁺, Cu²⁺, and Hg²⁺ ions by using proper masking agents like EDTA, KI, and NaCl. The probe only responds to Ag⁺, Cu²⁺, and Hg²⁺ among the tested ions without any interference. The probe performs quite well (the limit of detection: 160 ppb, 148 ppb, and 276 ppb of Ag⁺, Cu²⁺, and Hg²⁺ions for UV-Vis, and 15 ppb, 37 ppb, and 467 ppb of Ag⁺, Cu²⁺, and Hg²⁺ ions for fluorescence, respectively), and has a fast response time (150 sec, 90 sec, and 90 sec of Ag⁺, Cu²⁺, and Hg²⁺ions for UV-Vis, and 300 sec, 240 sec, and 90 sec Ag⁺, Cu²⁺, and Hg²⁺ions for fluorescence, respectively). The probe also displays a colorimetric feature for UV-Vis and smartphone applications. Based on a single probe, Ag⁺, Cu²⁺, and Hg²⁺ ions which are the main toxic water contaminants could be recognized very quickly and colorimetrically with high recovery values in tap water samples. This study stands out with its unique properties compared to the related studies in the literature.

A visualized ratiometric fluorescence sensing system for copper ions based on gold nanoclusters/perovskite quantum dot@SiO2 nanocomposites

Excessive copper ions (Cu²⁺) cause serious environmental pollution and even endanger the health of organisms. Fluorescence chemosensing materials are widely used in the detection of metal ions due to their simple operation and high sensitivity. In this study, SiO₂-encapsulated single perovskite quantum dot (PQD@SiO₂) core-shell nanostructures which show strong, stable, and green fluorescence are synthesized and composited with gold nanoclusters (AuNCs) which show Cu²⁺-sensitive and red light-emitting fluorescence to obtain a visualized ratiometric fluorescence sensor (AuNCs/PQD@SiO₂) for the detection of Cu²⁺. In the visualized detection of Cu²⁺, the green fluorescence emitted from the ion-insensitive PQD@SiO₂ component is used as a reference signal and the red fluorescence emitted by ion-sensitive AuNC component is adopted as a sensing signal. In the presence of Cu²⁺, the red fluorescence is quenched whereas the green fluorescence remains stable, which results in a visualized fluorescence color change from orange-red to yellow and finally to green with increasing Cu²⁺ concentration. The significant change in the fluorescence color of AuNCs/PQD@SiO₂ in response to Cu²⁺ enables a rapid, sensitive, and visualized detection of Cu²⁺. Further accurate and sensitive ratiometric fluorescence analysis of Cu²⁺ can be accomplished by measuring the ratio of fluorescence intensities at 643 and 520 nm (I₆₄₃/I₅₂₀) at a certain Cu²⁺ level. The developed AuNCs/PQD@SiO₂-based sensor has been validated by its satisfactory application in the detection of Cu²⁺ in human serum and environmental water samples.

Fluorescent noble metal nanoclusters for contaminants analysis in food matrix

Recently, food safety issues caused by contaminants have aroused great public concern. The development of innovative and efficient sensing techniques for contaminants detection in food matrix is in urgent demand. As fluorescent nanomaterials, noble metal nanoclusters have attracted much attention because of their ease of synthesis, enhanced catalytic activity and biocompatibility, and most importantly, excellent photoluminescence property that provides promising analytical applications. This review comprehensively introduced the synthesis method of noble metal nanoclusters, and summarized the application of metal nanoclusters as fluorescent sensing materials in the detection of pollutants, including pesticides, heavy metal, mycotoxin, food additives, and other contaminants in food. The detection mechanism of pesticide residues mostly relies on the inhibition of natural enzymes. For heavy metals, the detection mechanism is mainly related to the interaction between metal ions and nanoclusters or ligands. It is evidenced that metal nanoclusters have great potential application in the field of food safety monitoring. Moreover, challenges and future trends of nanoclusters were discussed. We hope that this review can provide insights and directions for the application of nanoclusters in contaminants detection.

Preparation of Large Conjugated Polybenzimidazole Fluorescent Materials and Their Application in Metal Ion Detection

A new type of conjugated polybenzimidazole (CPBI) was synthesized through a simple polycondensation reaction without metal catalysis, and N-alkylation modification was carried out to solve the problems of solubility and fluorescence properties. A series of nano-microsphere polymers CPBI_n with large conjugation, good solubility, and strong fluorescence has been successfully used as “turn-off” fluorescent probes for the first time. The results show that, under suitable N-alkylation conditions, the obtained CPBI_n can be used as a highly sensitive and selective fluorescent probe for the detection of Cu²⁺ and Zn²⁺ at the same time, and their detection limits are both nM levels. In addition, CPBI₂ can be designed as an ultra-sensitive IMPLICATION logic gate at the molecular level, cyclically detecting Cu²⁺. With the test paper containing CPBI₂, easy and quick on-site detection can be achieved. This research provides a new idea for the brief synthesis of multifunctional materials.

Metal Nanostructures for Environmental Pollutant Detection Based on Fluorescence

Heavy metal ions and pesticides are extremely dangerous for human health and environment and an accurate detection is an essential step to monitor their levels in water. The standard and most used methods for detecting these pollutants are sophisticated and expensive analytical techniques. However, recent technological advancements have allowed the development of alternative techniques based on optical properties of noble metal nanomaterials, which provide many advantages such as ultrasensitive detection, fast turnover, simple protocols, in situ sampling, on-site capability and reduced cost. This paper provides a review of the most common photo-physical effects impact on the fluorescence of metal nanomaterials and how these processes can be exploited for the detection of pollutant species. The final aim is to provide readers with an updated guide on fluorescent metallic nano-systems used as optical sensors of heavy metal ions and pesticides in water.

Natural protein-templated fluorescent gold nanoclusters: Syntheses and applications

For the past decades, the synthesis of metal nanoclusters has been a great interest for research, for their unique physicochemical properties and great contributions to the catalytic, electrical and biomedical applications. Protein-templated gold nanoclusters (AuNCs) is a kind of fluorescent nanomaterials with good solubility, excellent stability, biocompatibility, decent quantum yields and active groups (-COOH, -NH₂) for facilitating modifications. Natural proteins are easily available, commercially affordable, diverse and multitudinous in animals, plants and foods, which provide a template pool for the exploration of AuNCs. This is one of the few reviews of specifically focusing on the natural protein-templated fluorescent AuNCs. The syntheses, properties and applications of different AuNCs were enumerated. Prospects were given on utilizing structure-modified proteins, bioactive enzymes, antibodies which should endow the AuNCs more favourable fluorescence performances and functional characteristics. The applications of AuNCs in analytical, biomedical and food sciences would be further heightened.