Synthesis, thermal stability and surface activity of imidazolium monomeric surfactants

Interaction, Surface Activity, and Application of Mixed Systems of Alcohol Ether Sulfate Anionic Surfactants with Multiple Ethylene Oxide Groups and Gemini Quaternary Ammonium Surfactant

The surface activities and application properties for the mixtures of cationic surfactants tetramethylene-1,4-bis[N,N-bis(hydroxypropyl)-hexa/decyloxypropylammonium] bromide (GC10-P) and tetramethylene-1,4-bis[N,N-bis(hydroxyethyl)-hexa/decyloxypropylammonium] bromide (GC10-E) and anionic surfactant isomeric sodium fatty alcohol ether sulfates (iso-AE9S) were investigated using both the tensiometry and the conductometry. The interaction parameters and thermodynamic micellization parameters of GC10-P/iso-AE9S and GC10-E/iso-AE9S mixtures were evaluated by Clint-Rubingh and Motomura theoretical models. When the mole fraction of α1 for GC10-P/iso-AE9S mixed system was 0.2, the critical micelle concentration (CMC) reached a minimum of 1.61 × 10-4 mol/L, and the minimum critical micelle concentration of the GC10-E/iso-AE9S mixed system is 2.67 × 10-5 mol/L at α1 = 0.6. The CMC value of the mixed system is 1-2 orders of magnitude lower than that of any single component. The results indicate that the synergistic effects of the investigated mixed systems (evaluated by βm) are in order of GC10-P/iso-AE9S < GC10-E/iso-AE9S, with maximum βm values of -17.98 and -9.78, respectively. The change in zeta potential indicates that the poly(ethylene oxide) chain has weakened the charge density of the hydrophilic headgroup of the anionic surfactant. The interfacial tension at the oil-water interface in the mixed system of anionic/cationic surfactants is lower than that of any single component, exhibiting a higher interfacial activity. The mixed system exhibits a decreased contact angle and superior wetting ability over any single component, and it also enhances foam performance, emulsification performance, and degreasing performance.

Long-Term Thermal Stability of Ionic Surfactants for Improving Oil Production at High-Salinity High-Temperature Conditions

Surfactants with stable chemical structures and robust ability are required to lower interfacial tension and stabilize emulsions for successful chemical injection applications. This work selected six surfactants, dodecyl carboxylic sodium (LAS), dodecyl sulfonate dodecyl sodium (SLS), dodecyl sulfate sodium (SDS), dodecyltrimethylammonium bromide (DTAB), 3-(N,N-dimethylmyristylammonio) propanesulfonate (SB3-14) and a sulfobetaine formulation (PCT-10), and systematically investigated the ionic-type effects on thermal stability at 95 °C for 150 days in high-salinity water (total dissolved solids (TDS) = 57,600 ppm). With characterizations of aged samples performed through a spinning drop tensiometer, high-performance liquid chromatography, and infrared spectroscopy, it can be seen that the long-term stability sequence of ionic surfactants in solutions is sulfobetaine ≈ quaternary ammonium > sulfonate > sulfate > carboxylate. The carboxylate possibly precipitates out from the solution in the acid form, and the sulfonate and sulfate decompositions are due to the hydrolysis of the anionic head, forming alcohol and NaHSO3/NaHSO4. Obvious decomposition of sulfobetaine and quaternary ammonium was not observed, but these molecules might suffer the elimination of the ionic head, forming the corresponding alkene and amine. The results also show that the dissolved oxygen in the solution preparation significantly sped up the degradation of sulfonates. At last, the emulsion stability tests of crude oil in surfactant solutions showed that sulfobetaine surfactants retained the highest emulsifying ability after thermal aging and thus are promising candidates for long-term chemical injection in high-temperature high-salinity reservoirs.

Synthesis and physicochemical properties of sodium oleyl sulfate

In this paper, sodium oleyl sulphate (SOS) was successfully synthesised by reacting octyl alcohol (OA) with gaseous sulphur trioxide (SO3) as a sulphating reagent in a falling film reactor. The structure was determined by Fourier transform infrared (FTIR) and proton nuclear magnetic resonance (1HNMR) spectroscopy. The dynamic adsorption and aggregation behaviour of SOS was systematically investigated to reveal the relationship between the structure and properties of SOS. The physicochemical properties of SOS were determined by measuring the equilibrium surface tension, dynamic surface tension and dynamic contact angle, respectively. A laser particle size analyser and a transmission electron microscope (TEM) were used to analyse the aggregation behaviour of SOS. Compared to sodium dodecyl sulphate (SDS) and sodium n-octadecyl sulphate (C18H37OSO3Na), which have a similar structure to SOS, the increase in hydrophobic chain size and tighter molecular packing enabled by the polar head conformation caused a decrease in CMC and an increase in surface activity. The efficiency of the surface activity was controlled by a mixed diffusion kinetic adsorption mechanism. Moreover, SOS in aqueous solution showed efficient wettability on the surface of the low-energy paraffin film at concentration above the CMC. In addition, SOS molecules can spontaneously form spheroidal aggregates with increasing concentration, and the size of the aggregates increased with the concentration.