Colloidal stability and dynamic adsorption behavior of nanofluids containing alkyl-modified silica nanoparticles and anionic surfactant

Advancements in Surfactant Carriers for Enhanced Oil Recovery: Mechanisms, Challenges, and Opportunities

Enhanced oil recovery (EOR) techniques are crucial for maximizing the extraction of residual oil from mature reservoirs. This review explores the latest advancements in surfactant carriers for EOR, focusing on their mechanisms, challenges, and opportunities. We delve into the role of inorganic nanoparticles, carbon materials, polymers and polymeric surfactants, and supramolecular systems, highlighting their interactions with reservoir rocks and their potential to improve oil recovery rates. The discussion includes the formulation and behavior of nanofluids, the impact of surfactant adsorption on different rock types, and innovative approaches using environmentally friendly materials. Notably, the use of metal oxide nanoparticles, carbon nanotubes, graphene derivatives, and polymeric surfacants and the development of supramolecular complexes for managing surfacant delivery are examined. We address the need for further research to optimize these technologies and overcome current limitations, emphasizing the importance of sustainable and economically viable EOR methods. This review aims to provide a comprehensive understanding of the emerging trends and future directions in surfactant carriers for EOR.

Surface modification of nanoparticles for enhanced applicability of nanofluids in harsh reservoir conditions: A comprehensive review for improved oil recovery

Nanoparticles improve traditional Enhanced Oil Recovery (EOR) methods but face instability issues. Surface modification resolves these, making it vital to understand its impact on EOR effectiveness. This paper examines how surface-modified nanoparticles can increase oil recovery rates. We discuss post-synthesis modifications like chemical functionalization, surfactant and polymer coatings, surface etching, and oxidation, and during-synthesis modifications like core-shell formation, in-situ ligand exchange, and surface passivation. Oil displacement studies show surface-engineered nanoparticles outperform conventional EOR methods. Coatings or functionalizations alter nanoparticle size by 1-5 nm, ensuring colloidal stability for 7 to 30 days at 25 to 65 °C and 30,000 to 150,000 ppm NaCl. This stability ensures uniform distribution and enhanced penetration through low-permeability (1-10 md) rocks, improving oil recovery by 5 to 50 %. Enhanced recovery is achieved through 1-25 μm oil-in-water emulsions, increased viscosity by ≥30 %, wettability changes from 170° to <10°, and interfacial tension reductions of up to 95 %. Surface oxidation is suitable for carbon-based nanoparticles in high-permeability (≥500 md) reservoirs, leading to 80 % oil recovery in micromodel studies. Surface etching is efficient for all nanoparticle types, and combining it with chemical functionalization enhances resistance to harsh conditions (≥40,000 ppm salinity and ≥ 50 °C). Modifying nanoparticle surfaces with a silane coupling agent before using polymers and surfactants improves EOR parameters and reduces polymer thermal degradation (e.g., only 10 % viscosity decrease after 90 days). Economically, 500 ppm of nanoparticles requires 56.25 kg in a 112,500 m3 reservoir, averaging $200/kg, and 2000 ppm of surface modifiers require 4 kg at $3.39/kg. This results in 188,694.30 barrels, or $16,039,015.50 at $85 per barrel for a 20 % increase in oil recovery. The economic benefits justify the initial costs, highlighting the importance of cost-effective nanoparticles for EOR applications.

Rheological behavior and solution pH response properties of nanoparticle-regulated low surface tension systems

Regarding the rheological properties of fluids, certain nanoparticles can markedly modify the rheological behavior of low surface tension solutions by interacting with surfactant molecules. In this work, a low surface tension fluid with cetyltrimethylammonium chloride was prepared, and the silica nanoparticles were uniformly dispersed into it by ultrasonic dispersion. By adjusting the size, shape, and concentration of nanoparticles, the fluid behavior can be changed from Newtonian to non-Newtonian with finely tuned viscosity and characterized by a shear-thinning rheological behavior. In addition, this work explored how variations in environmental temperature and solution pH affect the rheological responses of the low surface tension suspension system. The experimental findings revealed that increasing the temperature substantially decreases the system's viscosity and induces a shear-thickening behavior. It is particularly significant that, under extreme pH conditions (either strongly acidic or alkaline), the viscosity of the nanoparticle suspensions was markedly enhanced at a particle concentration of 10 000 ppm. This interesting result coincided with a notable reduction in the zeta potential and an increase in the average particle size, suggesting an intensified aggregation of particles within the suspension system. A mechanism detailing the interaction between silica nanoparticles and surfactant micelles was proposed. This work indicates that the incorporation of nanoparticles into surfactant solutions offers a powerful approach to modulating fluid rheology across various conditions.

Colon targeted releases and uptakes of paclitaxel loaded in modified porous starch

Hyaluronic acid can modify porous starch through cross-linking and hydrogen bonding, effectively achieving a paclitaxel entrapment efficiency of ∼92 % and drug loading of ∼23 %. In this study, the pores and intergranular gaps of porous starch were filled with paclitaxel under solvent volatilization, and the enrichment process and its characteristics were recorded using a microscope. The paclitaxel-loaded particles were coated with chitosan-phytic acid to target the colon. In vivo imaging in mice showed that the capsule released paclitaxel in the colon rather than in the upper digestive tract, and the paclitaxel distribution in the main organs at 24 h was significantly lower than that of raw paclitaxel. Hyaluronic acid-modified porous starch can target cancer cells. Cell internalization of paclitaxel mediated by hyaluronic acid was approximately 1.97 times that of raw paclitaxel, higher than that of receptor-shielded cells and cells incubated with unmodified carriers, as evidenced by the accumulation of fluorescent paclitaxel in the nucleus and marked cell apoptosis. The hyaluronic acid-modified porous starch system is an effective method for the high-load and targeted release of hydrophobic anticancer drugs.

Preparation and Dispersion Performance of Hydrophobic Fumed Silica Aqueous Dispersion

Hydrophobic fumed silica (HFS) is a commonly used rheology additive in waterborne coatings. A series of experiments were conducted on the HFS-dispersing technology in this study. The size and structure of HFS primary particles were observed via transmission electron microscopy (TEM). The measurement results of the TEM were D50 = 13.6 nm and D90 = 19.7 nm, respectively. The particle size and dispersion performance of HFS were tested via dynamic light scattering (DLS). Additionally, the HFS aqueous dispersion was prepared and compounded with waterborne polyacrylic latex and polyurethane resin. The elemental distribution of the coatings was characterized using energy dispersive spectroscopy (EDS). The results show that the HFS in a non-ionic polymer dispersant had the best dispersion performance. The particle size of the HFS in the aqueous dispersion is related to the dispersion conditions. Under optimized conditions, the HFS aqueous dispersion can be prepared with a particle size of D50 = 27.2 nm. The HFS aqueous dispersion has stable storage stability. Even after storage for 47 d, the particle size still did not change significantly.

Application of α-MnO2 nanoparticles for residual oil mobilization through surfactant polymer flooding

Injection of surfactant and polymer slug is among the most effective chemical enhanced oil recovery processes. The only problem encountered with the surfactant polymer (SP) flooding is the loss of surface-active agents that reduce the efficiency of surfactants in the chemical slug. Various attempts to modify SP flooding have been made previously so that the surfactant loss due to adsorption could be reduced. Nanoparticles (NPs) are one of the most effective ways of reducing surfactant adsorption as surfactant particles are held in the liquid phase by nanoparticles, resulting in lower surfactant losses due to adsorption. However, the high cost of the NPs limits their use on the field scale. To encounter this problem, the present study focuses on the application of the manganese dioxide NPs, synthesized through a green route that is economically viable. These NPs are found to be cost-effective as compared to commercially available NPs as well as the synthesis of these NPs does not require the use of toxic chemicals. The 1000 ppm NPs effectively reduced the surfactant adsorption by 46%. The surface tension was lowered from 29.4 to 26.1 mN/m when 1000 ppm NPs were applied to 2500 ppm surfactant solution. Also, the nanoparticles were found to increase the viscosity of the chemical slug by increasing the solid particles present in the slug. The sand pack flooding experiments were carried out to assess the crude oil mobilization ability of the NPs assisted SP flooding. The oil recovery was found to increase from 5% of the original oil in place, resulting in ~ 75% of the crude oil recovery, which was only ~ 70% when NPs were not introduced into the system.

Nanomaterials for subsurface application: study of particles retention in porous media

The ability to transport nanoparticles through porous media has interesting engineering applications, notably in reservoir capacity exploration and soil remediation. A series of core-flooding experiments were conducted for quantitative analysis of functionalized TiO2 nanoparticles transport through various porous media including calcite, dolomite, silica, and limestone rocks. The adsorption of surfactants on the rock surface and nanoparticle retention in pore walls were evaluated by chemical oxygen demand (COD) and UV–Vis spectroscopy. By applying TiO2 nanoparticles, 49.3 and 68.0 wt.% of surfactant adsorption reduction were observed in pore walls of dolomite and silica rock, respectively. Not surprisingly, the value of nanoparticle deposition for dolomite and silica rocks was near zero, implying that surfactant adsorption is proportional to nanoparticle deposition. On the other hand, surfactant adsorption was increased for other types of rock in presence of nanoparticles. 5.5, 13.5, and 22.4 wt.% of nanoparticle deposition was estimated for calcite, black and red limestone, respectively. By making a connection between physicochemical rock properties and nanoparticle deposition rates, we concluded that the surface roughness of rock has a significant influence on mechanical trapping and deposition of nanoparticles in pore-throats.