Salt induced fluffy structured electrospun fibrous matrix

Electrospun polysuccinimide scaffolds containing different salts as potential wound dressing material

In this research, we applied electrospinning to create a two-component biodegradable polymeric scaffold containing polysuccinimide (PSI) and antibacterial salts. Antibacterial agents for therapeutical purposes mostly contain silver ions which are associated with high environmental impact and, in some cases, may cause undesired immune reactions. In our work, we prepared nanofibrous systems containing antibacterial and tissue-regenerating salts of zinc acetate or strontium nitrate in different concentrations, whose structures may be suitable for developing biomedical wound dressing systems in the future. Several experiments have been conducted to optimize the physicochemical, mechanical, and biological properties of the scaffolds developed for application as wound dressings. The scaffold systems obtained by PSI synthesis, salt addition, and fiber formation were first investigated by scanning electron microscopy. In almost all cases, different salts caused a decrease in the fiber diameter of PSI polymer-based systems (<500 nm). Fourier-transform infrared spectroscopy was applied to verify the presence of salts in the scaffolds and to determine the interaction between the salt and the polymer. Another analysis, energy-dispersive X-ray spectroscopy, was carried out to determine strontium and zinc atoms in the scaffolds. Our result showed that the salts influence the mechanical properties of the polymer scaffold, both in terms of specific load capacity and relative elongation values. According to the dissolution experiments, the whole amount of strontium nitrate was dissolved from the scaffold in 8 h; however, only 50% of the zinc acetate was dissolved. In addition, antibacterial activity tests were performed with four different bacterial strains relevant to skin surface injuries, leading to the appearance of inhibition zones around the scaffold discs in most cases. We also investigated the potential cytotoxicity of the scaffolds on human tumorous and healthy cells. Except for the ones containing zinc acetate salt, the scaffolds are not cytotoxic to either tumor or healthy cells.

Formation of Three-Dimensional Polysuccinimide Electrospun Fiber Meshes Induced by the Combination of CaCl2 and Humidity

Even though electrospinning is getting more and more attention, the preparation of 3D nanofibrous meshes is still a big challenge that limits the application of electrospun materials, especially in tissue engineering. To overcome this problem, several solutions are introduced but most of them focus on the postprocessing of the electrospun meshes. This paper presents a straightforward novel method that utilizes the joint effect of the addition of CaCl2 and the relative environmental humidity (RH), which can induce the random 3D formation of polysuccinimide (PSI) electrospun fibers with different such as wrinkled or ribbon-like structures. Although the effect of humidity and inorganic salt additives on the micro and macrostructure of electrospun fibers is known, the connection between the two in this manner has never been presented. To investigate the effect, fibers with different PSI and CaCl2 concentrations at different humidity RH levels are prepared, and their microstructure is visualized with high-resolution scanning electron microscopy (SEM). To reveal the nature of the interaction between the polymer and the CaCl2, Fourier-transformed infrared (FTIR), X-ray diffraction (XRD), and thermogravimetry (TGA) measurements are carried out and 3D nanofibrous structures are obtained.

Zn salts incorporated polyurethane/polyacrylonitrile electrospinning fiber membrane for high porosity polymer electrolyte in Zn ion battery

So far, a large variety of polymer molecule architectures have been explored in the electrolyte field. Polymer electrolytes have gathered research efforts as an interesting alternative to conventional liquid electrolytes due to their advantages of low probability of leakage and low volatility of liquid solvent, lightweight, flexibility, inertness, high durability, and thermal stability. In this work, a polymer electrolyte developed from a polyurethane/polyacrylonitrile (PU/PAN) electrospinning fiber membrane was added with different zinc (Zn) salts, namely, Zn(CH3CO2)2, ZnSO4, and Zn(OTf)2. The samples with the Zn salt presented many different properties; especially, the high Zn(OTf)2 sample showed gradually bundle morphology in its structure. Characterization revealed improved properties in contact angle, water uptake, and thermal resistance. Namely, the 15 wt% Zn(OTf)2) sample exhibited an outstandingly high ionic conductivity of 3.671 mS cm-1, which is 10 times higher than that of the neat PU/PAN membrane.

Characterization of Electrospun Polysuccinimide-Dopamine Conjugates and Effect on Cell Viability and Uptake

Biocompatible nanofibrous systems made by electrospinning have been studied widely for pharmaceutical applications since they have a high specific surface and the capability to make the entrapped drug molecule amorphous, which increases bioavailability. By covalently conjugating drugs onto polymers, the degradation of the drug as well as the fast clearance from the circulation can be avoided. Although covalent polymer-drug conjugates have a lot of advantages, there is a lack of research focusing on their nano-formulation by electrospinning. In this study, polysuccinimide (PSI) based electrospun fibrous meshes conjugated with dopamine (DA) are prepared. Fiber diameter, mechanical properties, dissolution kinetics and membrane permeability are thoroughly investigated, as these are crucial for drug delivery and implantation. Dopamine release kinetics prove the prolonged release that influenced the viability and morphology of periodontal ligament stem cells (PDLSCs) and SH-SY5Y cells. The presence of dopamine receptors on both cell types is also demonstrated and the uptake of the conjugates is measured. According to flow cytometry analysis, the conjugates are internalized by both cell types, which is influenced by the chemical structure and physical properties. In conclusion, electrospinning of PSI-DA conjugates alters release kinetics, meanwhile, conjugated dopamine can play a key role in cellular uptake.

Characterization of Electrospinning Prepared Nitrocellulose (NC)-Ammonium Dinitramide (ADN)-Based Composite Fibers

Nanoscale composite energetic materials (CEMs) based on oxidizer and fuel have potential advantages in energy adjustment and regulation through oxygen balance (OB) change. The micro- and nanosized fibers based on nano nitrocellulose (NC)-ammonium dinitramide (ADN) were prepared by the electrospinning technique, and the morphology, thermal stability, combustion behaviors, and mechanical sensitivity of the fibers were characterized by means of scanning electron microscope (SEM), transmission electron microscopy (TEM), differential scanning calorimetry (DSC), gas pressure measurement of thermostatic decomposition, laser ignition, and sensitivity tests. The results showed that the prepared fibers with fluffy 3D macrostructure were constructed by the overlap of micro/nanofibers with the energetic particles embedded in the NC matrix. The first exothermic peak temperature (T_p) of the samples containing ADN decreased by 10.1 °C at most compared to that of ADN, and the pressure rise time of all the samples containing ADN moved forward compared to that of the sample containing NC only. Furthermore, ADN can decrease the ignition delay time of NC-based fibers under atmosphere at room temperature from 33 ms to 9 ms and can enhance the burning intensity of NC-based fibers under normal pressure. In addition, compared to the single high explosive CL-20 or RDX, the mechanical sensitivities of the composite materials containing high explosive CL-20 or RDX were much decreased. The positive oxygen balance of ADN and the intensive interactions between ADN and NC can reduce the ignition delay time and promote the burning reaction intensity of NC-based composite fibers, while the mechanical sensitivities of composite fibers could be improved.