Photocatalytic and antimicrobial activity of biosynthesized silver and titanium dioxide nanoparticles: A comparative study

Investigation of the efficacy of Zn/Ce-CuO nanoparticles for enhanced photocatalytic, antibacterial, and antioxidant activities

The world is dealing with unprecedented environmental challenges, leading to a growing urgency to limit environmental damage. So, this study focuses on the synthesis of pure CuO, Zn, Ce, and Zn/Ce dual-doped CuO nanoparticles (NPs) using extract of Citrus limon leaves as reductant via simple co-precipitation method. The X-ray diffraction (XRD) characterization was employed to analyze structural characteristics of synthesized samples which confirm influence of Zn or Ce doping on crystallite size, dislocation density, and strain. The role of functional groups, changes in force constant, and bond length on addition of dopants was indicated by FTIR results. The SEM and TEM results showed variation in morphology from irregular to spherical. The zeta-potential and BET analysis confirmed surface potential as well as surface area characteristics. The change in energy gap values from 1.81 to 1.45 eV of Zn/Ce-doped CuO NPs computed from UV-vis analysis elevated its photocatalytic performance and reduced the chances of recombination of electron-hole pair due to presence of trapping levels between valence and conduction bands. The enhanced photo-degradation of Congo red (CR) and rhodamine B (RhB) with 91 and 94%, respectively, for Zn/Ce-doped CuO NPs was observed. The so-obtained samples have also exhibited good antibacterial and antioxidant activities.

Multifaceted chemical and bioactive features of Ag@TiO2 and Ag@SeO2 core/shell nanoparticles biosynthesized using Beta vulgaris L. extract

Due to increasing concerns about environmental impact and toxicity, developing green and sustainable methods for nanoparticle synthesis is attracting significant interest. This work reports the successful green synthesis of silver (Ag), silver-titanium dioxide (Ag@TiO2), and silver-selenium dioxide (Ag@SeO2) nanoparticles (NPs) using Beta vulgaris L. extract. Characterization by XRD, SEM, TEM, and EDX confirmed the successful formation of uniformly distributed spherical NPs with controlled size (25 ± 4.9 nm) and desired elemental composition. All synthesized NPs and the B. vulgaris extract exhibited potent free radical scavenging activity, indicating significant antioxidant potential. However, Ag@SeO2 displayed lower hemocompatibility compared to other NPs, while Ag@SeO2 and the extract demonstrated reduced inflammation in a carrageenan-induced paw edema animal model. Interestingly, Ag@TiO2 and Ag@SeO2 exhibited strong antifungal activity against Rhizoctonia solani and Sclerotia sclerotium, as evidenced by TEM and FTIR analyses. Generally, the findings suggest that B. vulgaris-derived NPs possess diverse biological activities with potential applications in various fields such as medicine and agriculture. Ag@TiO2 and Ag@SeO2, in particular, warrant further investigation for their potential as novel bioactive agents.

Hybrid Materials Obtained by Immobilization of Biosynthesized Ag Nanoparticles with Antioxidant and Antimicrobial Activity

Ag nanoparticles (AgNPs) were biosynthesized using sage (Salvia officinalis L.) extract. The obtained nanoparticles were supported on SBA-15 mesoporous silica (S), before and after immobilization of 10% TiO2 (Degussa-P25, STp; commercial rutile, STr; and silica synthesized from Ti butoxide, STb). The formation of AgNPs was confirmed by X-ray diffraction. The plasmon resonance effect, evidenced by UV-Vis spectra, was preserved after immobilization only for the sample supported on STb. The immobilization and dispersion properties of AgNPs on supports were evidenced by TEM microscopy, energy-dispersive X-rays, dynamic light scattering, photoluminescence and FT-IR spectroscopy. The antioxidant activity of the supported samples significantly exceeded that of the sage extract or AgNPs. Antimicrobial tests were carried out, in conditions of darkness and white light, on Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli and Candida albicans. Higher antimicrobial activity was evident for SAg and STbAg samples. White light increased antibacterial activity in the case of Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa). In the first case, antibacterial activity increased for both supported and unsupported AgNPs, while in the second one, the activity increased only for SAg and STbAg samples. The proposed antibacterial mechanism shows the effect of AgNPs and Ag+ ions on bacteria in dark and light conditions.

Multifunctional characteristics of biosynthesized CoFe2O4@Ag nanocomposite by photocatalytic, antibacterial and cytotoxic applications

Carissa carandas, a traditional medicinal herb with a high concentration of antioxidant phytochemicals, has been used for thousands of years in the Ayurveda, Unani, and homoeopathic schools of medicine. By employing Carissa carandas bark extract as a reducing and capping agent in green biosynthesis, we extend this conventional application to produce CoFe2O4 and CoFe2O4@Ag nanocomposite. A variety of techniques have been used to characterize the synthesised nanocomposite, including UV-Vis, FTIR, XRD, FESEM, EDX, and BET. The CoFe2O4 and CoFe2O4@Ag nanocomposite demonstrated promising antibacterial action against human bacterial pathogens like B. subtilis and S. aureus as gram positive and P. aeruginosa and E. coli as gram negative with inhibition zones of 24.3 ± 0.57, 17.4 ± 0.75 and 20.5 ± 0.5, 19.8 ± 1.6 mm respectively, and the obtained results were superior to the nanocomposite without silver. Moreover, in-vitro cytotoxicity effects of biosynthesized CoFe2O4 and CoFe2O4@Ag were performed on the human breast cancer cell MCF-7. It was found that the MCF-7 cells' 50% inhibitory concentration (IC50) was 60 μg/mL. Additionally, biosynthesized CoFe2O4 and CoFe2O4@Ag nanocomposite was used to demonstrate the photocatalytic eradication of Rhodamine Blue (RhB). Due to the addition of Ag, which increases surface area, conductivity, and increased charge carrier separation, the CoFe2O4@Ag nanocomposite exhibits a high percentage of photocatalytic degradation of ⁓ 98% within 35 min under UV light irradiation. The photocatalytic performance of as-synthesised nanocomposite was evaluated using dye degradation-adsorption in both natural light and dark condition. Under dark conditions, it was found that 2 mg mL-1 CoFe2O4@Ag in RhB aqueous solution (5 ppm) causes dye adsorption in 30 min with an effectiveness of 72%. Consequently, it is anticipated that the CoFe2O4@Ag nanocomposite will be a promising photocatalyst and possibly a noble material for environmental remediation applications.

Recent advances in nanoantibiotics against multidrug-resistant bacteria

Multidrug-resistant (MDR) bacteria-caused infections have been a major threat to human health. The abuse of conventional antibiotics accelerates the generation of MDR bacteria and makes the situation worse. The emergence of nanomaterials holds great promise for solving this tricky problem due to their multiple antibacterial mechanisms, tunable antibacterial spectra, and low probabilities of inducing drug resistance. In this review, we summarize the mechanism of the generation of drug resistance, and introduce the recently developed nanomaterials for dealing with MDR bacteria via various antibacterial mechanisms. Considering that biosafety and mass production are the major bottlenecks hurdling the commercialization of nanoantibiotics, we introduce the related development in these two aspects. We discuss urgent challenges in this field and future perspectives to promote the development and translation of nanoantibiotics as alternatives against MDR pathogens to traditional antibiotics-based approaches.

Electrochemical monitoring of congo red degradation using strontium titanate-doped biochar nanohybrids derived photocatalytic plates

Present investigation demonstrates the development and characterization of strontium titanate (SrTiO₃) doped biochar nanohybrid photocatalysts. Biochar nanohybrid was synthesized using an ultrasonic-assisted dispersion technique, which involved dispersing SrTiO₃ nanoparticles into activated biochar at a weight ratio of 1:2 (w/w) under ambient conditions. The development of the biochar nanohybrid was verified through a comprehensive analysis of their spectral, microstructural, thermal, electrical, and electrochemical properties. The scanning electron microscopy analysis reveals a surface-associated multiphase morphology of the biochar nanohybrid, attributed to the uniform distribution of SrTiO₃ within the activated biochar matrix. Biochar nanohybrid exhibited a reduced optical band gap of 2.77 eV, accompanied by a crystallite size of 32.45. Thermogravimetric analysis revealed the thermal stability of the biochar nanohybrid, as evidenced by a char residue of 70.83% at 1000 °C. The working electrodes derived from biochar nanohybrid have exhibited ohmic behavior and displayed a significantly enhanced DC conductivity (mS/cm) of 1.13, surpassing that of activated biochar (0.53) and SrTiO₃ (0.62) at 100 V. The developed biochar nanohybrid were employed for the degradation of congo red dye by exposing the dye solution to photocatalytic plates. These photocatalytic plates were prepared by coating biochar nanohybrid onto glass plates using epoxy-based reactive binders for secure binding. The photodegradation of congo red was evaluated through cyclic voltammetric analysis in a 0.1 M KCl solution at pH 8.0, resulting in an impressive 99.95% photocatalytic efficiency in degrading a congo red solution (50 mg/L). This study presents a novel approach for the fabrication of biochar nanohybrid-derived photocatalytic plates, offering high photocatalytic efficiency for the degradation of congo red dye.

Synthesis of Ce and Sm Co-Doped TiO2 Nanoparticles with Enhanced Photocatalytic Activity for Rhodamine B Dye Degradation

One of the major concerns that receive global attention is the presence of organic pollutants (dyes, pharmaceuticals, pesticides, phenolic compounds, heavy metals, and so on), originating from various industries, in wastewater and water resources. Rhodamine B is widely used in the dyeing of paints, plastics, textiles, and other fabrics, as well as biological products. It is highly persistent, toxic, and carcinogenic to organisms and humans when directly released into the water supply. To avoid this hazard, several studies have been conducted in an attempt to remove Rhodamine B from wastewater. Metal oxide semiconducting materials have gained great interest because of their ability to decompose organic pollutants from wastewater. TiO2 is one of the most effective photocatalysts with a broad range of applications. Several attempts have been made to improve its photocatalytic activity. Accordingly, we have prepared in this work a series of cerium (Ce) and samarium (Sm) co-doped TiO2 nanoparticles (x = 0.00, 0.25, 0.50, 1.00, and 2.00%) using a sol–gel auto-combustion approach. The influence of Ce–Sm concentrations on the structural, morphology, electronic, and optical properties, as well as the photocatalytic activity, was investigated. Structure and elemental mapping analyses proved the presence of Ce and Sm in the compositions as well as the development of the TiO2 anatase phase with a tetragonal structure and crystallite size of 15.1–17.8 nm. Morphological observations confirmed the creation of spherical nanoparticles (NPs). The examination of the electronic structure properties using density functional theory (DFT) calculations and of the optical properties using a UV/Vis diffuse spectrophotometer showed a reduction in the bandgap energy upon Ce–Sm co-doping. The photocatalytic activity of the synthesized products was assessed on the degradation of Rhodamine B dye, and it was found that all Ce–Sm co-doped TiO2 nanoparticles have better photocatalytic activities than pristine TiO2 nanoparticles. Among all of the prepared nanoparticles, the sample with x = 0.50% demonstrated the best photocatalytic activity, with a degradation efficiency of 98% within 30 min and a reaction rate constant of about 0.0616 min−1. h+ and •O2− were determined to be the most important active species in the photocatalytic degradation process. Besides the high photocatalytic degradation efficiency, these photocatalysts are highly stable and could be easily recovered and reused, which indicates their potential for practical applications in the future.

Evaluation of acute toxicity response to the algae Chlorella pyrenoidosa of biosynthetic silver nanoparticles catalysts

Biosynthetic of silver nanoparticles (AgNPs) by using fungi has attracted much attention due to its high catalytic efficiency and environmentally friendly characteristic. However, a few studies have focused on the ecological toxicity effects of biogenic AgNPs on algae. Here, we first investigated the catalytic reduction of 4-nitrophenol (4-NP) by WZ07-AgNPs biosynthesized by Letendraea sp. WZ07. WZ07-AgNPs had significant catalytic activity with 97.08% degradation of 4-NP in 3.5 min. Then, the toxic effects of WZ07-AgNPs and commercial-AgNPs were compared by Chlorella pyrenoidosa growth, chlorophyll content, protein content, physiological, and biochemical indexes. The results demonstrated that the algal cell biomass of C. pyrenoidosa was differentially inhibited after exposure to different concentrations of AgNPs, which showed concentration dependence and time dependence. The 96h-EC₅₀ values of WZ07-AgNPs and commercial-AgNPs on C. pyrenoidosa were 15.99 mg/mL and 12.69 mg/mL, respectively. With the increase concentration of AgNPs, the chlorophyll content was gradually decreased, the protein content was first increased and then decreased, the activities of superoxide dismutase (SOD) and catalase (CAT) were decreased, and the level of malondialdehyde (MDA) was increased significantly of C. pyrenoidosa. In general, AgNPs affect the growth of algae to some extent. However, compared with commercial-AgNPs, WZ07-AgNPs is less toxic to C. pyrenoidosa, which could be used as a potential and an eco-friendly catalyst. This study provides a basis for the safe application of biosynthetic AgNPs.

Hydrothermal synthesis and characterization of the antimony-tin oxide nanomaterial and its application as a high-performance asymmetric supercapacitor, photocatalyst, and antibacterial agent

We have synthesized antimony-tin oxide (ATO) nanoparticles chemically for use in antibacterial, photocatalytic, and supercapacitor applications. The XRD pattern reveals the hexagonal structure, while the FTIR spectra validate the functional groups. The agglomerated nanostructures, which are 40-50 nm thick and 100 nm long, are shown in the SEM images as having spherical, cube, square, and rod form morphologies. In a DLS test, ATO has a zeta potential of 28.93/-28.00 mV, demonstrating strong colloidal stability in the suspension. With minimum inhibitory concentrations (MIC) ranging from 25 to 100 g mL-1, ATO is also tested for its antibacterial activity against a variety of Gram-positive and Gram-negative bacteria. Additionally, rhodamine dye was broken down by ATO nanoparticles in 240 minutes with a degradation efficiency of 88 percent. The specific capacitance (C s) and energy density (E) values of ATO nanoparticles further demonstrated their suitability for use in supercapacitors.

Enhancing the anti-ageing, antimicrobial activity and mechanical properties of surface-coated paper by Ag@TiO2-modified nanopigments

In this work, the effect of using Ag-doped TiO₂ nanopigments on optical, mechanical and antimicrobial properties of coated paper was explored. Furthermore, the long-term antimicrobial activity of the coated paper was examined for up to 25 years. Titanium dioxide (TiO₂) nanoparticles have been synthesized and doped with different percentages of Ag nanoparticles (Ag NPs) using a simple wet chemical approach. The Ag@TiO₂ modified nanopigments were in the form of nanorods with an average size of about 20 nm as observed from TEM images. Increasing Ag content from 0.01 to 1.0% showed an increase in the mechanical properties of coated paper in terms of tensile, stretching, tensile energy absorption and burst while preserving the optical properties. Moreover, the antimicrobial inhibition activity increased with increasing the Ag content. The 1% Ag@TiO₂ showed a long-lasting antimicrobial effect against Staphylococcus aureus (S. aureus) Gram-positive bacteria even after 25 years of ageing (93.4% inhibition). Investigation of reactive oxygen species (ROS) generation and reaction mechanism of antimicrobial activity over Ag/TiO₂ under visible light is proposed. These results suggest that Ag/TiO₂ NPs can be potentially used as a disinfection coating for paper and improving its mechanical properties.

Eco-Friendly Approach to Produce Durable Multifunctional Cotton Fibres Using TiO2, ZnO and Ag NPs

The development of durable multifunctional properties is crucial for the production of high-performance technical textiles. In this work, a novel, environmentally friendly and facile method was developed for the chemical modification of cotton fabric by in situ biosynthesis of Ag NPs in the presence of sumac leaf extract as a reducing agent on TiO₂, ZnO and TiO₂ + ZnO previously applied to cotton fibres. The results showed that the presence of TiO₂, ZnO and TiO₂ + ZnO significantly increased the concentrations of the synthesised Ag NPs on the cotton fibres compared to the one-component Ag coating. This resulted in excellent antimicrobial properties of the TiO₂/Ag, ZnO/Ag and TiO₂ + ZnO/Ag composites even after 25 washes. While the TiO₂ and ZnO particles in the composite were incompatible, the synergistic effect among Ag, TiO₂ and ZnO in the composites resulted in excellent UV blocking properties of the coatings before and after 25 washes. Since the biosynthesis of Ag NPs was accompanied by a yellow-brown colouration of the samples, the photocatalytic self-cleaning of the composite coating could not be determined from the photodegradation rate of the coffee stains. This research provides a new environmentally friendly approach to producing durable antimicrobial and UV blocking coatings on cotton fibres.

A comprehensive review on sustainable greener nanoparticles for efficient dye degradation

The effluents released from textile industries mainly consist of dyes, metals and other pollutants. Dyes often are discharged in wastewater streams causing adverse effect on the environment. To eliminate these harmful dyes, various techniques are emerging out of which nanotechnology is the most reliable and safer. Nanotechnology offers convincing applications in case of environmental and economic concerns. The bio-synthesis of nanoparticles has several advantages over conventional methods and approach towards environment concern as well. Biological method of nanoparticles synthesis is concluded to be the most promising and efficient in action. Bio-synthesised nanoparticles could be used for treatment and decolourisation of dyes in an efficient manner. This review comprises the study of number of bio-synthesised nanoparticles utilised for degradation of various dyes present as pollutants in wastewater. Bio-synthesised nanoparticles such as gold, silver, iron, cobalt, zinc, titanium and molybdenum used for degradation of various dyes have been discussed in this review.

Antibacterial, antifungal, antiviral, and photocatalytic activities of TiO2 nanoparticles, nanocomposites, and bio-nanocomposites: Recent advances and challenges

The applications of nanomaterials specifically metal and metal nanoparticles in various medical and industrial fields have been due to their unique properties compared to bulk materials. A combination of pharmacology and nanotechnology has helped the production of novel antimicrobial agents to control resistant microorganisms of bacteria and fungi. The properties of metal nanoparticles and metal oxides such as titanium dioxide (TiO2), zinc oxide (ZnO), silver (Ag), and copper (Cu) are well known as efficient antimicrobial agents. In particular, TiO2 nanoparticles have been considered as an attractive antimicrobial compound due to their photocatalytic intrinsic and their stable, non-toxic, inexpensive, and safe physicochemical properties. Therefore, in this review, recent advances and challenges of antibacterial, antifungal, antiviral, and photocatalytic activities of TiO2 nanoparticles, nanocomposites, and bio-nanocomposites are presented to help future studies.

Therapeutic potential of biogenic titanium dioxide nanoparticles: a review on mechanistic approaches

Biogenic titanium dioxide nanoparticles have unique size, shape and biochemical functional corona that embellish them with the potential to perform therapeutic actions such as anticancer, antimicrobial, antioxidant, larvicidal and photocatalysis by adopting various mechanistic or physiological approaches at the molecular level. We have provided a detailed overview of some of these physiological mechanisms, including disruption of the electron transport chain, DNA fragmentation, mitochondrial damage, induction of apoptosis, disorganization of the plasma membrane, inhibition of ATP synthase activity, suspension of cellular signaling pathways and inhibition of enzymatic activity. The biogenic synthesis of customized titanium dioxide nanoparticles has future application potentials to do breakthroughs in the pharmaceutical sectors to advance precision medicine and to better explain the disease prognosis and treatment strategies.