A controlled, highly effective and sustainable approach to the surface performance improvement of wool fibers

Adenosine Triphosphate/Chitin Whisker/Phenylboronic Acid-Modified Wool Fabrics with Enhanced Dyeability

Promoting the uptake of dyes is an important part of the sustainable processing of wool products. This study presents an effective modification approach to enhance the dyeability of wool fabric with adenosine triphosphate as an activator, 3-carboxyphenyl boronic acid as a ligand-binding agent, and chitin whisker as a couple agent. The structure and surface morphology of the as-prepared wool fabric was characterized in detail. Natural luteolin and acid red 1 were used to dye the modified wool fabric, and the effect of different dyeing parameters on dyeing properties was discussed. The results indicated that the modified wool gained better surface color depth (K/S) and uptake without additional agents than the untreated wool fabric. When the modified wool fabric was dyed at 45 °C with luteolin and at 60 °C with acid red 1, the dyeing processes of the two dyes on the modified wool fabrics followed the Langmuir isotherm and the pseudo-second-order kinetic model. Furthermore, the dyed modified wool fabrics possessed improved color fastness. Overall, this work offers a facile, effective, and sustainable way to improve the low-temperature dyeability of wool products.

Deep eutectic solvents induced changes in the phase transition behavior of smart polymers: a sustainable future approach

Deep eutectic solvents (DESs) are considered "green" and "sustainable" alternatives to conventional organic solvents and ionic liquids (ILs) due to their characteristic properties and relatively low costs. DESs are considered IL analogs and have attracted consideration as benign media formulations for the synthesis of novel polymers because they satisfy the principle of sustainability. Over the past few years, the use of DESs has resulted in novel pathways for the synthesis of novel materials, biomaterials, functional materials, and ionic soft materials. Furthermore, DESs have been widely applied in the science, industrial, engineering, and technological fields. On the other hand, stimulus-responsive (smart) polymers have been widely utilized in intelligent devices owing to their virtues of good processibility, stimuli and environmental sensitivity, responsivity, and so on. With the introduction of a DES into the smart polymeric matrices, their potential characteristics, biocompatibility, and flexibility endow the corresponding DES-based polymeric materials with intriguing properties, which in turn will broaden their applications in various domains of polymer science and material chemistry. Substantial research has been done in the fabrication of DES-based polymeric materials. Numerous studies have extensively investigated the effects of DESs on biomolecules such as proteins/enzymes and nucleic acids, whereas few have addressed the impact of DESs on the aggregation and phase transition behaviors of smart polymers. This review focuses on mechanistic insights, aggregation behavior, and interactions between smart polymers and DESs. Opportunities and future research perspectives in this blossoming arena are also discussed. It is hoped that this review will pave futuristic pathways for the design and development of advanced DES-based polymeric materials and biomaterials for various applications.

Physicochemical and thermomechanical performances study for Timahdite sheep wool fibers application in the building's insulation

The present research focuses on the development and thermomechanical characterization of unfired solid bricks based on clay (white and red) and Timahdite sheep wool, which are local, durable, abundant, and economical materials. As this clay material is incorporated with sheep wool in the form of yarn multi-layers in opposite directions. It achieves good thermal and mechanical performance and a lightness of these bricks as acquired progress. This new method of reinforcement offers significant thermo-mechanical performance for the composite for thermal insulation in sustainable buildings. Several physicochemical analyses to characterize the raw materials were used. Thermomechanical measurements to characterize the elaborated materials. The wool yarn effect was significant on the mechanical behavior of the developed materials at 90 days, with flexural strength from 18 to 56% for the white clay. And 8-29% for the red one. Decrease in compressive strength from 9 to 36% for the white clay and 5-18% for the red one. These mechanical performances are accompanied by thermal conductivity gain ranging from 4 to 41% for the white and 6-39% for the red for wool fractions: 6-27 g. This green multi-layered bricks from abundant local materials with optimal thermo-mechanical properties, qualified for the intended use for thermal insulation and energy efficiency in the construction and development of local economies.

Microwave-ultra-fast recovery of valuable metals from spent lithium-ion batteries by deep eutectic solvents

The large-scale use of electric vehicles produced massive discarded lithium-ion batteries, containing many recyclable valuable metals and toxic and harmful substances. Biodegradable and recyclable deep eutectic solvent (DES) is considered a green recycling technology for spent LIBs. Herein, we proposed a microwave-enhanced approach to shorten the leaching time in the urea/lactic acid: choline chloride: ethylene glycol DES system. The dipole moments induced by urea or lactic acid on LiCoO₂ surface increased over two orders of magnitude under the high electric field. Because of this, over 90 % of Li and Co can be fast leached at 4 min and 160 W in the urea/lactic acid: choline chloride: ethylene glycol DES system. Meanwhile, we established two models to explain the leaching mechanism of metal ions from their leaching kinetics and micro-level behavior, and named them dot-etching and layer-peeling processes, respectively. By further analyzing, we found that the dot-etching can be attributed to the synergistic effect of reduction and coordination, which caused the surface of leaching residues porous. The layer-peeling process depends on neutralization, and the leaching residues had a smooth surface in this process. This work highlights the effect of microwave-enhanced strategy and DES surface chemistry on spent electrode materials recovery.

Liquid-Ammonia-Mediated Dyeing Process of Wool at a Lower Temperature

Liquid ammonia as a non-aqueous medium has many physical properties close to water, such as small molecular weight and strong permeability. It has been widely used for the ecological processing of cellulosic fibers to improve their luster, softness and dyeing properties. However, there are few reports on the dyeing of wool treated with liquid ammonia, especially at a lower temperature. Herein, a continuous liquid ammonia finishing machine was used to batch process wool followed by dyeing in a commonly-used wool dyeing machine. The results showed that many scale flakes and some cuticle cracking were seen on the fiber surface, and the disulfide bonds of cystine were broken down after liquid ammonia treatment, which promoted the diffusion of dyestuff into the fiber. Moreover, the uptakes and K/S value of wool dyed with Lanaset and Lanasol CE dyes were higher than the untreated wool, and the dyeing temperature could decrease to 85 °C, while the degree of fiber strength reduction merely decreased by 3–5%. Furthermore, for the reactive dyes, the dyeing temperature can reduce to 70 °C with the chemical auxiliaries Miralan LTD, while the degree of strength reduction decrease by 8–10%. Liquid ammonia treatment can be used for dyeing at a lower temperature than boiling temperature (100 °C), reduce energy consumption and reduce the degree of fiber strength reduction of wool. The method shows considerable to great value and is significant in providing a feasible approach for the industrial application of low-temperature dyeing technology.