Self-healing polymers using electrosprayed microcapsules containing oil: Molecular dynamics simulation and experimental studies

Practical Applications of Self-Healing Polymers Beyond Mechanical and Electrical Recovery

Self-healing polymeric materials, which can repair physical damage, offer promising prospects for protective applications across various industries. Although prolonged durability and resource conservation are key advantages, focusing solely on mechanical recovery may limit the market potential of these materials. The unique physical properties of self-healing polymers, such as interfacial reduction, seamless connection lines, temperature/pressure responses, and phase transitions, enable a multitude of innovative applications. In this perspective, the diverse applications of self-healing polymers beyond their traditional mechanical strength are emphasized and their potential in various sectors such as food packaging, damage-reporting, radiation shielding, acoustic conservation, biomedical monitoring, and tissue regeneration is explored. With regards to the commercialization challenges, including scalability, robustness, and performance degradation under extreme conditions, strategies to overcome these limitations and promote successful industrialization are discussed. Furthermore, the potential impacts of self-healing materials on future research directions, encompassing environmental sustainability, advanced computational techniques, integration with emerging technologies, and tailoring materials for specific applications are examined. This perspective aims to inspire interdisciplinary approaches and foster the adoption of self-healing materials in various real-life settings, ultimately contributing to the development of next-generation materials.

The recent development of carbon-based nanoparticles as a novel approach to skin tissue care and management - A review

Since the skin is the first barrier of the body's defense against pathogens, delays in the healing process are affected by infections. Therefore, applying advanced substitute assistance improves the patient's quality of life. Carbon-based nanomaterials show better capabilities than conventional methods for managing skin wound infections. Due to their physicochemical properties such as small size, large surface area, great surface-to-volume ratio, and excellent ability to communicate with the cells and tissue, carbon-based nanoparticles have been considered in regenerative medicine. moreover, the carbon nano family offers attractive potential in wound healing via the improvement of angiogenesis and antibacterial compared to traditional approaches become one of the particular research interests in the field of skin tissue engineering. This review emphasizes the wound-healing process and the role of carbon-based nanoparticles in wound care management interaction with tissue engineering technology.

Impact of minimum distance constraints on sheet metal waste for plasma cutting

We approached the two-dimensional rectangular strip packing problem (2D-SPP), where the main goal is to pack a given number of rectangles without any overlap to minimize the height of the strip. Real-life constraints must be considered when developing 2D-SPP algorithms to deliver solutions that will improve the cutting processes. In the 2D-SPP literature, a gap related to studies approaching constraints in real-life scenarios was identified. Therefore, the impact of real-life constraints found in the plasma cutting process in sheet metal waste was analyzed. A mathematical model from the literature was modified to obtain packing arrangements with plasma cutting constraints. The combination of size and number of rectangles, as well as strip width, was the main factor that affected the packing arrangement, limiting the allocation of rectangles and generating empty spaces. In summary, considering the sheet metal waste context, instances with smaller widths should be avoided in practical operations for high minimum distance constraint values, returning the worst packing arrangements. For low minimum distance constraint values, smaller width instances can be used in practical operations, as the packing arrangement is acceptable. Finally, this article can reduce material waste and enhance the cutting process in the sheet metal industry, by showing packing characteristics which lead to higher amounts of raw material waste.

Construction and mechanism study of lignin-based polyurethane with high strength and high self-healing properties

Lignin is a natural polymer with abundant functional groups with great application prospects in lignin-based polyurethane elastomers with self-healing abilities. In this study, a lignin self-healing polyurethane (PUDA-L) was specially designed using lignin as the raw material of polyurethane, combining lignin with Diels-Alder (DA) bond and hydrogen bonds. The experimental results showed that PUDA-L was prepared with good thermal stability, fatigue resistance, shape memory effect, excellent mechanical strength, and self-healing ability by partially replacing the crosslinking agents with bio-based lignin and hydroxylated modified lignin to increase the hydroxyl content. Polyurethane has a tensile strength of up to 29 MPa and an elongation at break of up to 500 %. The excellent self-healing ability of PUDA-L originates from the internal DA bonds and cross-linked hydrogen bonds. After the dumbbell sample was fused and heated at 130 °C for 4 h, the elastomer could be completely healed, the tensile strength was restored to 29 MPa, and the self-healing efficiency was up to 100 %. The developed PUDA-L elastomer has promising applications in sensors and smart skins.

Novel electrosprayed enhanced microcapsules with different nanoparticles containing healing agents in a single multicore microcapsule

A novel method was employed to synthesize microcapsules containing both epoxy and hardener healing agents in a single microcapsule using a two-step electrospraying technique. Moreover, the sodium alginate microcapsule shell was enhanced with three types of nanoparticles, including MWCNT, nanoclay, and nanosilica. The surface morphology of fabricated microcapsules was examined using FESEM and AFM images. The TEM and elemental mapping images illustrated that the added nanoparticles into sodium alginate microcapsule shells were dispersed homogeneously. In addition, the mechanical properties of microcapsule shells were obtained using nanoindentation tests. Based on this research, the addition of nanoparticles increased the size and the roughness of microcapsules and improved the elastic modulus and the hardness of microcapsule's outer shells, significantly. For instance, the elastic modulus and the hardness of incorporated microcapsule shells with MWCNT increased by 85.5% and 91.3%, respectively, compared to neat sodium alginate multicore microcapsules, due to intrinsic high strength and high aspect ratio of MWCNT.

Investigation of the mechanical properties of a bony scaffold for comminuted distal radial fractures: Addition of akermanite nanoparticles and using a freeze-drying technique

One of the methods of repairing the damaged bone is the fabrication of porous scaffold using synergic methods like three-dimensional (3D) printing and freeze-drying technology. These techniques improve the damaged and fracture parts rapidly for better healing bone lesions using bioactive ceramic and polymer. This research, due to the need to increase the mechanical strength of 3D bone scaffolds for better mechanical performance. Akermanite bioceramic as a bioactive and calcium silicate bioceramic has been used besides the polymeric component. In this study, the porous scaffolds were designed using solid work with an appropriate porosity with a Gyroid shape. The prepared Gyroid scaffold was printed using a 3D printing machine with Electroconductive Polylactic Acid (EC-PLA) and then coated with a polymeric solution containing various amounts of akermanite bioceramic as reinforcement. The mechanical and biological properties were investigated according to the standard test. The mechanical properties of the porous-coated scaffold showed stress tolerance up to 30 MPa. The maximum strain obtained was 0.0008, the maximum stress was 32 MPa and the maximum displacement was 0.006 mm. Another problem of bone implants is the impossibility of controlling bone cancer and tumor size. To solve this problem, an electroconductive filament containing Magnetic Nanoparticles (MNPs) is used to release heat and control cancer cells. The mechanical feature of the porous scaffold containing 10 wt% akermanite was obtained as the highest stress tolerance of about 32 MPa with 46% porosity. Regarding the components and prepare the bony scaffold, the MNPs release heat when insert into the magnetic field and control the tumor size which helps the treatment of cancer. In general, it can be concluded that the produced porous scaffold using 3D printing and freeze-drying technology can be used to replace broken bones with the 3D printed EC-PLA coated with 10 wt% akermanite bioceramic with sufficient mechanical and biological behavior for the orthopedic application.