Metal-organic and Zeolitic imidazole frameworks as cationic dye adsorbents: physicochemical optimizations by parametric modeling and kinetic studies

Recent advances and potential applications for metal-organic framework (MOFs) and MOFs-derived materials: Characterizations and antimicrobial activities

Microbial infections, particularly those caused by antibiotic-resistant pathogens, pose a critical global health threat. Metal-Organic Frameworks (MOFs), porous crystalline structures built from metal ions and organic linkers, initially developed for gas adsorption, have emerged as promising alternatives to traditional antibiotics. This review, covering research up to 2023, explores the potential of MOFs and MOF-based materials as broad-spectrum antimicrobial agents against bacteria, viruses, fungi, and even parasites. It delves into the historical context of antimicrobial agents, recent advancements in MOF research, and the diverse synthesis techniques employed for their production. Furthermore, the review comprehensively analyzes the mechanisms of action by which MOFs combat various microbial threats. By highlighting the vast potential of MOFs, their diverse synthesis methods, and their effectiveness against various pathogens, this study underscores their potential as a novel solution to the growing challenge of antibiotic resistance.

Parametric study and process modeling for metronidazole removal by rhombic dodecahedron ZIF-67 crystals

Metronidazole (MNZ) is an extensively used antibiotic against bacterial infections for humans and farm animals. Prevention of antibiotics discharge is essential to prevent adverse environmental and health impacts. A member of metal-organic frameworks, zeolite imidazole framework-67 with cobalt sulfate precursor (ZIF-67-SO4) and exceptional physio-chemical properties was prepared via room temperature precipitation to adsorb MNZ. The study framework was designed by Box-Behnken Design to evaluate the effect of pH, ZIF-67-SO4 dose, and contact time on adsorption efficiency. The polynomial model fitted the adsorption system indicated the optimal condition for 97% MNZ removal occurs at pH = 7, adsorbent dosage = 1 g/L, and mixing time = 60 min. The model also revealed that the removal increased with contact time and decreased at strong pH. Equilibrium and kinetic study also indicated the adsorption of MNZ followed the intra-particle diffusion model and the Langmuir isotherm model with a qmax = 63.03 mg/g. The insignificant loss in removal efficacy in use-reuse adsorption cycles reflected the practical viability of ZIF-67-SO4.

Highly porous organoclay-supported bimetal-organic framework (CoNi-MOF/OC) composite with efficient and selective adsorption of organic dyes

Herein, a highly porous bimetal-organic framework (bi-MOF) based on cobalt and nickel was successfully in situ grown on organoclay (OC) clusters by solvothermal method. Accordingly, the hierarchical porous CoNi-MOF/OC composite with a superior specific surface area of 2046 m²/g and a large pore volume of 0.763 cm³/g was obtained, which facilitated the adsorption of organic dyes. A morphological study using scanning electron microscopy indicated the formation of uniform bi-MOF crystals on the OC plates. Furthermore, the single- and multi-dye adsorption assays were implemented to precisely evaluate the adsorption capacity and selectivity of CoNi-MOF/OC composite to anionic and cationic dyes. The results revealed a high adsorption capacity of 58.61 mg/g at an adsorbent content of 15 mg, initial dye concentration of 20 ppm, and contact time of 25 min for MB, which is superior to several existing clay-based adsorbents. The adsorption kinetics study showed that the adsorption of cationic and anionic dyes onto the CoNi-MOF/OC composite followed the pseudo-second-order kinetic model. Interestingly, the regeneration study showed appropriate reusability and stability of the CoNi-MOF/OC composite for the removal of organic dyes with an almost unchanged structure after four regeneration cycles. The results of this study provide new insights for the rational design and fabrication of next-generation clay-based adsorbent by combining the synergistic advantages of bi-MOF with superior specific surface area and pore volume with organoclay composition and structure.

Isotherm, kinetic, thermodynamics and reusability data on the adsorption of antidepressant onto silver nanoparticle-loaded biowaste

There has been an increase in the use of antidepressant drugs owing to significant economic challenges across the globe. Consequently, the increase in production of such drugs has impacted pharmaceutical pollution of industrial wastewaters discharged into the environment. Hence, there is a need to develop efficient adsorbents for antidepressant wastewater treatment. The impregnation of silver nanoparticles on biowaste was found to be highly effective in the treatment of oil-polluted water but has not been utilized in the adsorption of drugs. Herein, the dataset associated with the adsorption of antidepressants onto Ananas Comosus Peel (AP) and Silver nanoparticle-loaded Ananas Comosus peel (AgAP) was reported. Batch adsorption methodology was used to study the effect of antidepressant concentration (10–50 mg/L), sonication time (10–120 min), temperature (300–320 K) and adsorbent dosage (0.10–0.18 g). The concentration of antidepressant (Nortriptyline) in solution before and after adsorption was determined by the UV-Spectrophotometer at a maximum wavelength of 239 nm. The isotherm dataset was obtained from the Langmuir, Freundlich, Temkin and Dubinin-Raduskevich models, while kinetic data was evaluated by the pseudo-first order-pseudo-second-order, film diffusion and intraparticle diffusion rate equations. The data on the thermodynamics and adsorbent reusability were also provided. The dataset showed an adsorption capacity of 3.27 mg/g and 4.74 mg/g for AP and AgAP, respectively. The dataset is important to material and environmental scientists and revealed the efficiency of AP and AgAP in the treatment of antidepressant wastewater.

Fast and efficient adsorption of palladium from aqueous solution by magnetic metal-organic framework nanocomposite modified with poly(propylene imine) dendrimer

In this study, a magnetic metal-organic framework (MMOF) was synthesized and post-modified with poly(propyleneimine) dendrimer to fabricate a novel functional porous nanocomposite for adsorption and recovery of palladium (Pd(II)) from aqueous solution. The morphological and structural characteristics of the prepared material were identified by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmet-Teller (BET) isotherm, and vibrating sample magnetometer (VSM). The results confirmed the successful synthesis and post-modification of MMOF. Semispherical shape particles (20-50 nm) with appropriate magnetic properties and a high specific surface area of 120 m²/g were obtained. An experimental design approach was performed to show the effect of adsorption conditions on Pd(II) uptake efficiency of the dendrimer-modified magnetic adsorbent. The study showed that the Pd(II) uptake on dendrimer-modified MMOF was well described by the Langmuir isotherm model with the highest uptake capacity of 291 mg/g under optimal condition (adsorbent content of 12.5 mg, Pd ion concentration of 80 ppm, pH = 4, and contact time of 40 min). The adsorption kinetics of Pd(II) ions was suggested to be a pseudo-first-order model. The results revealed a faster adsorption rate and higher adsorption capacity (about 43%) for dendrimer-modified MMOF. Finally, the reusability of the provided adsorbent was evaluated. This work provides a valuable strategy for designing and developing efficient magnetic adsorbents based on MOFs for the adsorption and recovery of precious metals.

Preparation and Characterization of New CrFeO3-Carbon Composite Using Environmentally Friendly Methods to Remove Organic Dye Pollutants from Aqueous Solutions

Globally, environmental pollution is an important issue. Various pollutants present in water resources, such as bacteria, heavy-metal ions, and organic pollutants, cause serious problems to the environment, animals, plants, and human health. Among the water resources, pollutants, dyestuff, which is discharged from dyeing, textile, and other industrial processes, is an important class of pollutants. Removing these dye pollutants from water resources and wastewater is vital and important due to their toxicity. In this work, a CrFeO3-carbon nanotube (CNT) adsorbent was synthesized using environmentally friendly methods. The synthesized CrFeO3-CNT adsorbent was characterized stoichiometrically, spectroscopically, and morphologically. The synthesized CrFeO3-CNT adsorbent was tested for the removal of two dyes: Methyl violet 2B (MV) and Azocarmine G2 (AC) from an aqueous solution. Crushing CrFeO3 composite with multi-walled fullerene CNT to prepare CrFeO3-CNT adsorbent improved the adsorption performance of free multi-walled fullerene CNT towards MV dye by 30% and towards AC dye by 33.3%.

An Environmentally Friendly Method for Removing Hg(II), Pb(II), Cd(II) and Sn(II) Heavy Metals from Wastewater Using Novel Metal–Carbon-Based Composites

Rapid economic and industrial development and population growth have made water contamination a serious environmental problem and a major threat to public health worldwide. Heavy metals are extensively used in numerous industrial applications and are some of the most important environmental contaminants. The impacts of heavy metals on the health of humans, animals, and plants make their removal from wastewater and water resources an important and vital issue. In this study, a simple and environmentally friendly method is proposed for the synthesis of a ZnFe2O4-carbon nanotube (CNT) adsorbent material. SEM/EDX analysis and Fourier-transform infrared spectrophotometry (FTIR) are used to characterize the synthesized adsorbent material. We test the synthesized adsorbent material’s ability to recover four heavy metals (Hg(II), Pb(II), Cd(II) and Sn(II) ions) from an aqueous solution. We show that crushing fullerene CNTs with the ZnFe2O4 composite improves the adsorption properties of free fullerene CNTs towards the investigated heavy metal ions by 25%.