New Gemini surfactants based on alkyl benzenaminium: Synthesis and links to application of corrosion protection

An electrochemical, and surface studies of synthesized Gemini ionic liquid as corrosion inhibitor for carbon steel in petroleum field

In this work, we study the efficiency of N1, N3-dibenzyl-N1, N1, N3, N3-tetramethylpropane-1,3-diaminium chloride, as anticorrosion. This compound exhibits potential as a prospective remedy to stop the deterioration of carbon steel caused by corrosion in 1.0 M HCl. The synthesis of this compound is described in a comprehensive manner, and its composition is supported by a range of precise analytical approaches such as elemental analysis, and mass spectroscopy. Based on the findings of the investigation, the synthesized Gemini ionic liquid demonstrates a robust capacity to slow down the rate at which the metal corrodes. The Prepared compound was evaluation by electrochemical and morphology study. Our results revealed that elevating the inhibitor concentration led to an augmentation in inhibition effectiveness, reaching up to 94.8% at 200 ppm of the synthesized compound at 298 K. It is crucial to emphasize that the recently prepared Gemini ionic liquid is consistent with the Langmuir adsorption model and function as a mixed inhibitor, participating in the physio-chemisorption process of adsorption.

Synthesis, surface activity, and corrosion inhibition capabilities of new non-ionic gemini surfactants

Several environmentally acceptable non-ionic gemini surfactants are synthesized in this work using natural sources, including polyethenoxy di-dodecanoate (GSC12), polyethenoxy di-hexadecanoate (GSC16), and polyethenoxy di-octadecenoate (GSC18). The produced surfactants are confirmed by spectrum studies using FT-IR, 1HNMR, and 13CNMR. It explored and examined how the length of the hydrocarbon chain affected essential properties like foaming and emulsifying abilities. Surface tension examinations are used to assess the surface activity of the examined gemini surfactants. The lower value of critical micelle concentrations (0.381 × 10-4M) is detected for GSC18. Their spontaneous character is shown by the negative values of the free energy of adsorption (ΔGads) and micellization (ΔGmic) which arranged in the order GSC18 > GSC16 > GSC12. Based on theoretical, weight loss, and electrochemical investigations, these novel surfactants were investigated for their possible use in inhibiting carbon steel from corroding in 1 M HCl. Measuring results show that GSC18 inhibits corrosion in carbon steel by 95.4%. The isotherm of adsorption evaluated for the investigated inhibitors and their behavior obeys Langmuir isotherm.

Corrosion inhibition of mild steel in 1 M HCl by pyrazolone-sulfonamide hybrids: synthesis, characterization, and evaluation

Carbon steel is widely used in the petroleum industry for pipelines, storage tanks, and equipment due to its mechanical properties, and strength. However, challenges such as environmental conditions and corrosive materials can affect its lifespan and require maintenance and repair. This work aimed to prepare pyrazalone-sulfonamide hybrids, and confirmed by mass spectra, FTIR, 1H-NMR, and 13C-NMR. These compounds were examined as mild steel corrosion inhibitors in 1 M HCl solutions at 298-323 K using the gravimetric technique, electrochemical measurements, scanning electronic microscope analysis, and quantum chemical calculations. The values of inhibitory efficiency identified by electrochemical and non-electrochemical techniques exhibit good agreement. At various temperatures and in the 50 to 500 ppm concentration range. During the adsorption process, these substances connect to the Langmuir adsorption isotherm. Some adsorption isotherm and kinetic parameters have been developed and discussed. The metal surface had a thin inhibitory protective layer, according to investigations using energy dispersive X-ray spectroscopy (EDX) and scanning electron microscope (SEM). These findings demonstrated the potential of pyrazolone-sulfonamide as effective organic corrosion inhibitors for carbon steel.

Anticorrosion Agents for Carbon Steel in Acidic Environments: Synthesis and Quantum Chemical Analysis of New Schiff Base Compounds with Benzylidene

Novel Schiff bases (SBs), namely, N1,N2-bis(2-(((E)-4-chlorobenzylidene)amino)ethyl)ethane-1,2-diamine (I), N1,N2-bis(2-(((E)-4-(dimethylamino)benzylidene)amino)ethyl)ethane-1,2-diamine (II), and N1,N'1-(ethane-1,2-diyl)bis(N2-((((Z)-4-dimethylamino)benzylidene) amino)methylethane-1,2-diamine) (III), were prepared and characterized by using elemental analysis, IR, and 1H NMR spectroscopy. For assessing carbon steel in diverse settings, with and without inhibitors at varying concentrations, electrochemical frequency modulation (EFM), electrochemical impedance spectroscopy (EIS), and potentiodynamic polarization (PP) techniques were employed. The results showed that the synthesized inhibitors effectively decreased the corrosion rate of carbon steel in acidic media and the inhibition efficiency reached up to 93% for compound III at a concentration of 250 ppm. In addition, all prepared compounds were successful as anticorrosion agents, and the inhibition mechanism followed chemisorption from the Langmuir isotherm. The data obtained from the theoretical analysis show that the efficiency of the prepared compounds was in the order III < II < I. Furthermore, quantum chemical calculations were performed to gain insight into the electronic structure of the compounds. The analysis of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) showed that compound III had the highest surface coverage due to its specific molecular structure and spacer. This observation agreed well with the Langmuir adsorption data.

Synthesis, description, and application of novel corrosion inhibitors for CS AISI1095 in 1.0 M HCl based on benzoquinoline derivatives

This study aims to synthesize and evaluate the corrosion inhibition properties of three newly prepared organic compounds based on benzo[h]quinoline hydrazone derivatives. The compounds structure were characterised using FTIR, 1H-NMR, 13C-NMR and Mass spectroscopy. Electrochemical methods, including Potentiodynamic Polarization (PP), Electrochemical Frequency Modulation (EFM), and Electrochemical Impedance Spectroscopy (EIS) were employed to evaluate the compounds as corrosion inhibitors in HCl (1.0 M) for carbon steel (CS). Additionally, surface examination techniques such as scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) were used to investigate the surface morphology and elemental composition of the CS before and after exposure to the synthesized compounds. The electrochemical measurements showed that compound VII achieved corrosion inhibition efficiency. SEM and EDX analysis further confirmed the creation of a passive film on the CS surface. These findings demonstrated the potential of benzo[h]quinoline hydrazone derivatives as effective organic corrosion inhibitors for CS in aggressive solution.

Anticorrosion Study for Brass Alloys in Heat Exchangers during Acid Cleaning Using Novel Gemini Surfactants Based on Benzalkonium Tetrafluoroborate

For a variety of applications, the brass alloy has been utilized to replace titanium tubes in heat exchangers. Copper alloys' high corrosion rate during the acid cleaning procedure remains a significant concern. To inhibit the corrosion of brass alloys, we prepared two novel gemini surfactants (GSs), N ₁,N ₃-dibenzyl-N ₁,N ₁,N ₃,N ₃-tetramethylpropane-1,3-diaminium tetrafluoroborate (I H) and N ₁,N ₁,N ₃,N ₃-tetramethyl-N ₁,N ₃-bis (4-methyl benzyl) propane-1,3-diaminium tetrafluoroborate (I Me), and they were characterized using Fourier transform infrared spectroscopy and ¹H nuclear magnetic resonance spectroscopy. Their inhibition performance against corrosion of brass alloys in 1 M HCl was studied using electrochemical techniques including potentiodynamic polarization (PP), electrochemical impedance spectroscopy, and electrochemical frequency modulation. The inhibition effect of the synthesized compounds was high, and it increased as the inhibitor's concentration was increased. The maximum level of inhibition efficiency was achieved at an inhibitor concentration of 100 ppm, reaching 96.42% according to PP measurements. From Langmuir data, the mechanisms of adsorption of the two GSs on the surface of copper was found to be physisorption and chemisorption adsorption. X-ray photoelectron spectroscopy and scanning electron microscopy show that the addition of the two compounds lowers the dissolution of brass ions in the corrosive solution and forms a protective layer on the surface of the brass.

Organic Compounds as Corrosion Inhibitors for Carbon Steel in HCl Solution: A Comprehensive Review

Most studies on the corrosion inhibition performance of organic molecules and (nano)materials were conducted within “carbon steel/1.0 M HCl” solution system using similar experimental and theoretical methods. As such, the numerous research findings in this system are sufficient to conduct comparative studies to select the best-suited inhibitor type that generally refers to a type of inhibitor with low concentration/high inhibition efficiency, nontoxic properties, and a simple and cost-economic synthesis process. Before data collection, to help readers have a clear understanding of some crucial elements for the evaluation of corrosion inhibition performance, we introduced the mainstay of corrosion inhibitors studies involved, including the corrosion and inhibition mechanism of carbon steel/HCl solution systems, evaluation methods of corrosion inhibition efficiency, adsorption isotherm models, adsorption thermodynamic parameters QC calculations, MD/MC simulations, and the main characterization techniques used. In the classification and statistical analysis section, organic compounds or (nano)materials as corrosion inhibitors were classified into six types according to their molecular structural characteristics, molecular size, and compound source, including drug molecules, ionic liquids, surfactants, plant extracts, polymers, and polymeric nanoparticles. We outlined the important conclusions obtained from recent literature and listed the evaluation methods, characterization techniques, and contrastable experimental data of these types of inhibitors when used for carbon steel corrosion in 1.0 M HCl solution. Finally, statistical analysis was only performed based on these data from carbon steel/1.0 M HCl solution system, from which some conclusions can contribute to reducing the workload of the acquisition of useful information and provide some reference directions for the development of new corrosion inhibitors.