Experimental and theoretical assessment of new and eco–friendly thioglycoluril derivative as an effective corrosion inhibitor of St2 steel in the aggressive hydrochloric acid with sulfate ions

Surface adsorption and corrosion resistance performance of modified chitosan: Gravimetric, electrochemical, and computational studies

Two novel chitosan derivatives (water soluble and acid soluble) modified with thiocarbohydrazide were produced by a quick and easy technique using formaldehyde as links. The novel compounds were synthesized and then characterized by thermogravimetric analysis, elemental analysis, nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and differential scanning calorimetry. Their surface morphologies were examined using scanning electron microscopy. These chitosan derivatives could produce pH-dependent gels. The behavior of mild steel in 5 % acetic acid, including both inhibitors at various concentrations, was investigated using gravimetric and electrochemical experiments. According to the early findings, both compounds (TCFACN and TCFWCN) functioned as mixed-type metal corrosion inhibitors. Both inhibitors showed their best corrosion inhibition efficiency at 80 mg L-1. TCFACN and TCFWCN, showed approximately 92 % and 94 % corrosion inhibition, respectively, at an optimal concentration of 80 mg L-1, according to electrochemical analysis. In the corrosion test, the water contact angle of the polished MS sample at 87.90 °C was reduced to 51 °C. The water contact angles for MS inhibited by TCFACN and TCFWCN in the same electrolyte were greater, measuring 78.10 °C and 93.10 °C, respectively. The theoretical results also support the experimental findings.

Electrochemical and DFT Studies of the Pistacia Integerrima Gall Extract: An Eco-friendly Approach towards the Corrosion of Steel in Acidic Medium

A novel application of the Pistacia integerrima gall extract as an environmentally friendly corrosion inhibitor is reported in this study. The major phytochemicals present in the gall extract, namely pistagremic acid, β-sitosterol, pistiphloroglucinyl ether, pistaciaphenyl ester, naringenin, and 5,7-dihydroxy-2-(4-hydroxyphenyl)-2,3-dihydrochromen-4-one, play key roles in its anticorrosive behavior on steel in aggressive media. Several approaches were used to study the corrosion prevention activity of steel in 1 M H2SO4, including weight loss analysis, scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), and density functional theory (DFT). At 2000 mg L-1, the highest efficiency of 92.19% was observed in 1 M H2SO4. An SEM study was conducted to validate the surface coverage of the metal surface. DFT studies revealed several nucleophilic regions present in the phytochemicals of the inhibitor, which supported the favorable nucleophilicity. Corrosion studies have not been performed on this sample. Phytochemicals make it an effective corrosion inhibitor, and its extraction process utilizes distilled water, making it better than other inhibitors. It has been proven that the obtained values of ΔEInhDFT for pistiphloroglucinyl, pistaciaphenyl ether, and naringenin organic compounds were very low, confirming the high reactivity of these corrosion inhibitors. The order of the values of ΔEInhDFT is as follows: pistaciaphenyl ether > pistiphloroglucinyl ether > naringenin organic compound; this suggests that pistaciaphenyl ether is more reactive than the other compounds. In this study, P. integerrima gall extract emerges as a novel and highly effective corrosion resistance agent in 1 M H2SO4, chosen for its relevance to acid pickling and cleaning processes.

Progress in the Field of Cyclophosphazenes: Preparation, Properties, and Applications

This review article provides a comprehensive overview of recent advancements in the realm of cyclophosphazenes, encompassing their preparation methodologies, distinctive properties, and diverse applications. The synthesis approaches are explored, highlighting advancements in the preparation of these cyclic compounds. The discussion extends to the distinctive properties exhibited by cyclophosphazenes, including thermal stability characteristics, and other relevant features. Furthermore, we examine the broad spectrum of applications for cyclophosphazenes in various fields, such as coatings, adhesives, composites, extractants, metal complexes, organometallic chemistry, medicine, and inorganic chemistry. This review aims to offer insights into the evolving landscape of cyclophosphazenes and their ever-expanding roles in contemporary scientific and technological arenas. Future possibilities are emphasized, and significant research data shortages are identified.

Glutamic Acid Enhances the Corrosion Inhibition of Polyaspartic Acid on Q235 Carbon Steel

Currently, poly(aspartic acid) (PASP) is used with traditional toxic agents for corrosion inhibition, which greatly reduces the environmental significance of PASP as a green inhibitor. Amino acids, small-molecule compounds with amino and carboxyl groups, may react with PASP and act as chains to link PASP molecules, which might enhance the inhibition of PASP on metal corrosion. In this study, we selected glutamic acid (GLU) as a typical amino acid to explore the potential synergistic effect of the amino acid and PASP on corrosion inhibition via electrochemical experiments and molecular dynamics simulation. The corrosion inhibition of PASP was promoted by GLU with less weight loss and less pitting. The results of molecular dynamics simulation showed that GLU could bind with PASP at carboxyl groups and amino groups via donor-acceptor interactions and accelerate the diffusion of PASP to the carbon steel surface. Furthermore, the binding between PASP and the carbon steel surface can be enhanced by GLU, resulting in a dense and stable protective film. To the best of our knowledge, this is the first investigation into the mechanism of an amino acid as an enhancer to improve corrosion inhibition. This work provides a new strategy to enhance existing green inhibitors, which would significantly reduce the cost of cooling water treatment and its adverse environmental impacts.

Essential Oil of Origanum vulgare as a Green Corrosion Inhibitor for Carbon Steel in Acidic Medium

In this study, Oregano (Origanum vulgare) leaf essential oil was studied as an environmental-friendly anticorrosion agent for carbon steel in aggressive hydrochloric acid. The corrosion inhibition of O. vulgare was characterized by surface morphology, electrochemical, weight loss, theoretical and computational methods. It was found that the highest inhibition performance of O. vulgare was 85.64% at 2 g/l in 1 M HCl. The results of Langmuir isotherm and adsorption thermodynamics investigation demonstrated that the O. vulgare inhibitor adsorbed on the metal surface by the formation of rigid covalent bonds. The adsorption and inhibition centers of the selected inhibitor were studied by the computational methods, resulting in that the hydroxyl functional groups and benzoyl rings are mainly responsible for the high inhibition efficiency.

Effective corrosion inhibition of mild steel in hydrochloric acid by newly synthesized Schiff base nano Co(ii) and Cr(iii) complexes: spectral, thermal, electrochemical and DFT (FMO, NBO) studies

Two new cobalt(ii) and chromium(iii) complexes were synthesized and characterized by FT-IR, 1HNMR, UV, elemental analysis, TGA, conductivity, XRD, SEM, and magnetic susceptibility measurements. Structural analysis revealed a bi-dentate chelation and octahedral geometry for the synthesized complexes. The optical band gap of the Co(ii)-L and Cr(iii)-L complexes was found to be 3.00 and 3.25 eV, respectively revealing semiconducting properties. The X-ray diffraction patterns showed nano-crystalline particles for the obtained complexes. In addition, the synthesized metal complexes were examined as corrosion inhibitors for mild steel in HCl solution. The electrochemical investigations showed a maximum inhibition efficiency of 96.60% for Co(ii)-L and 95.45% for Cr(iii)-L where both complexes acted as mixed-type inhibitors. Frontier Molecular orbital (FMO) and Natural bond orbital (NBO) computations showed good tendency of the ligand to donate electrons to the metal through nitrogen atoms while the resultant complexes tended to donate electrons to mild steel more effectively through oxygen atoms and phenyl groups. A comparison between experimental and theoretical findings was considered through the discussion.

Green β-cyclodextrin-based corrosion inhibitors: Recent developments, innovations and future opportunities

β-Cyclodextrin-based compounds are used to develop and innovate materials that protect against corrosion due to their sustainability, low cost, environmental friendliness, excellent water solubility and high inhibition efficiency. However, corrosion potentials of β-CD-based compounds were not reviewed with the modern trends. The essence of the problem is that a deep understanding of the development and innovation of β-CD-based compounds as corrosion inhibitors is very important in creating next-generation materials for corrosion protection. In this review, the fundamental behaviour, importance, developments and innovations of β-CD modified with natural and synthetic polymers, β-CD grafted with the organic compounds, β-CD-based supramolecular (host-guest) systems with organic molecules, polymer β-CD-based supramolecular (host-guest) systems, β-CD-based graphene oxide materials, β-CD-based nanoparticle materials and β-CD-based nanocarriers as corrosion inhibitors for various metals were reviewed and discussed with recent research works as examples. In addition, the corrosion inhibition of β-CD-based compounds for biocorrosion, microbial corrosion and biofouling was reviewed. It was found that (i) these compounds are sustainable, inexpensive, environmentally friendly, and highly water-soluble and have high inhibition efficiency; (ii) the molecular structure of β-CD makes it an excellent molecular container for corrosion inhibitors compounds; (iii) the β-CD is excellent core to develop the next generation of corrosion inhibitors. It is recommended that (i) β-CD compounds would be synthesized by green methods, such as using biological sustainable catalysts and green solvents, green methods include irradiation or heating, energy-efficient microwave irradiation, mechanochemical mixing, solid-state reactions, hydrothermal reactions and multicomponent reactions; (ii) this review will be helpful in creating, enhancing and innovating the next green and efficient materials for future corrosion protection in high-impact industries.

A General Use QSAR-ARX Model to Predict the Corrosion Inhibition Efficiency of Drugs in Terms of Quantum Mechanical Descriptors and Experimental Comparison for Lidocaine

A study of 250 commercial drugs to act as corrosion inhibitors on steel has been developed by applying the quantitative structure-activity relationship (QSAR) paradigm. Hard-soft acid-base (HSAB) descriptors were used to establish a mathematical model to predict the corrosion inhibition efficiency (IE%) of several commercial drugs on steel surfaces. These descriptors were calculated through third-order density-functional tight binding (DFTB) methods. The mathematical modeling was carried out through autoregressive with exogenous inputs (ARX) framework and tested by fivefold cross-validation. Another set of drugs was used as an external validation, obtaining SD, RMSE, and MSE, obtaining 6.76%, 3.89%, 7.03%, and 49.47%, respectively. With a predicted value of IE% = 87.51%, lidocaine was selected to perform a final comparison with experimental results. By the first time, this drug obtained a maximum IE%, determined experimentally by electrochemical impedance spectroscopy measurements at 100 ppm concentration, of about 92.5%, which stands within limits of 1 SD from the predicted ARX model value. From the qualitative perspective, several potential trends have emerged from the estimated values. Among them, macrolides, alkaloids from Rauwolfia species, cephalosporin, and rifamycin antibiotics are expected to exhibit high IE% on steel surfaces. Additionally, IE% increases as the energy of HOMO decreases. The highest efficiency is obtained in case of the molecules with the highest ω and ΔN values. The most efficient drugs are found with pK_a ranging from 1.70 to 9.46. The drugs recurrently exhibit aromatic rings, carbonyl, and hydroxyl groups with the highest IE% values.

Corrosion resistance and antibacterial activity of procyanidin B2 as a novel environment-friendly inhibitor for Q235 steel in 1 M HCl solution

Flavonoids, alkaloids, glucosides and tannins with good corrosion inhibition are the main natural components in plants. In this work, procyanidin B2 (PCB2), a natural flavonoid, was firstly isolated from Uncaria laevigata. Corrosion inhibition, chemical reactivity and adsorption of PCB2 on Q235 carbon steel were described by experimental and theoretical studies. The inhibition performance of PCB2 as a green corrosion inhibitor was evaluated by electrochemical and gravimetric tests. The binding active sites and activities thereof on the steel surface were illustrated by quantum chemistry, and the equilibrium configuration was predicted by molecular dynamics simulation. PCB2 exhibits good corrosion inhibition on Q235 steel over a wide temperature range. The electrochemical results show that PCB2 is a mixed inhibitor, and its inhibition efficiency increases with the addition of PCB2 concentration. Moreover, the protective film is formed on the steel and the active corrosion sites are blocked significantly by surface analysis. Additionally, the theoretical calculation proves a strong interaction between PCB2 molecule and carbon steel. Besides, the antimicrobial activity was also preliminarily studied. This suggests that PCB2 exhibits better antimicrobial activity against many Gram-positive and Gram-negative bacteria. As a novel green corrosion inhibitor and antimicrobial agent, PCB2 is worthy of further exploitation.

Natural parsley oil as a green and safe inhibitor for corrosion of X80 carbon steel in 0.5 M H2SO4 solution: a chemical, electrochemical, DFT and MC simulation approach

This work focuses on the use of natural parsley oil as a safe, eco-friendly and cost-effective inhibitor for dissolution of X80 carbon steel (X80CS) in 0.5 M H2SO4 solution. Electrochemical and chemical measurements and theoretical studies were utilized to determine the inhibitory vigor of parsley oil. The inhibition efficacy increases with an increase in the parsley oil concentration and a decrease in temperature. It reached 95.68% at 450 ppm of parsley oil. The inhibition process is explained by spontaneous adsorption of the oil on the X80CS. Adsorption is described by the Langmuir isotherm model. The polarization data demonstrate that parsley oil is categorized as a mixed inhibitor with a dominant control of the cathodic reaction. Parsley oil inhibits the pitting corrosion of X80CS in the presence of NaCl solution by moving the pitting potential to a more positive mode indicating protection against pitting attack. The thermodynamic parameters for activation and adsorption were computed and interpreted. The four chemical components in natural parsley oil were examined using density functional theory (DFT). Monte Carlo (MC) simulation was performed to study the adsorption of parsley oil on the X80CS surface. The outcomes confirmed that the Apiole molecule is the most effective in the inhibition process.