Two-dimensional Fe2O3 nanosheets as adsorbent for the removal of Pb(II) from aqueous solution

Removal of rhodamine blue dye from wastewaters by using perovskite@2D-layered nanostructured LaCoO3@g-C3N4 as super-nanosorbent material

To address water polluting hazardous and toxic dyes menace, we developed a novel LaCoO3@g-C3N4 composite, characterized it, and then employed it to adsorb rhodamine blue (RhB) from aqueous solutions. The synthesized nanomaterials consisted of LaCoO3 and Co3O4 phases of crystallite sizes 43.29 and 42.63 nm beside the nitride, with a surface area of 66.67 m2.g-1, and C, N, La, O, and Co as elemental composition, as confirmed by X-ray diffraction, BET and EDX analysis respectively. Batch sorption experiments were carried out to evaluate the performance of LaCoO3@g-C3N4 nanopowder on RhB dye removal where the experimental data well fitted the Langmuir isotherm and the pseudo-second-order kinetics models, thus validating monolayer chemisorption via hydrogen bonding and π- π electrostatic interaction. The findings indicated a high adsorption capacity of 1226 mg.g-1 and that the nanosorbent possessed good stability since it can be regenerated and reused efficiently with a very low retention rate of 90.8 %.

Sequestration of Ni (II), Pb (II), and Zn (II) utilizing biogenic synthesized Fe3O4/CLPC NCs and modified Fe3O4/CLPC@CS NCs: Process optimization, simulation modeling, and feasibility study

The present study reports low-cost novel biogenic magnetite Citrus limetta peels carbon (Fe3O4/CLPC) nanocomposites and modified Fe3O4/CLPC@CS nanocomposites cross-linked with glutaraldehyde and subsequently employed in batch mode sequestration of heavy metals ions. Diverse techniques fully characterized them, and the influence of operating variables on adsorption reactions from aqueous solutions was investigated. The Brunauer, Emmett, and Teller (BET) surface areas of synthesized Fe3O4/CLPC and Fe3O4/CLPC@CS NCs were 53.91 and 32.16 m2/g, while the mesoporous diameters were 7.69 and 7.57 nm, respectively. The Langmuir isotherm and Pseudo second order kinetic were well-fitting and capable of explaining the adsorption reaction. The Langmuir-based monolayer adsorption (qmax) for Fe3O4/CLPC@CS NCs was 82.65, 95.24, and 64.10 mg/g, higher than Fe3O4/CLPC NCs, which were 70.92, 84.75, and 59.17 mg/g for Ni (II), Pb (II), and Zn (II), respectively. Each metal's pseudo second order correlation coefficient (R2 ≥ 0.99) reveals that nanocomposites surface binding functional groups controlled the adsorption rate via chemisorption. Further, thermodynamic results confirm that each studied metal ions' adsorption was spontaneous, endothermic, and characterized by an increase in randomness. In addition to magnetic separability, three ad-desorption cycles yielded exceptional adsorption efficacy and > 93% regenerability. The present study also reveals the effective utilization of Fe3O4/CLPC and Fe3O4/CLPC@CS NCs as cost-effective magnetic separable green adsorbents for heavy metals sequestration from electroplating wastewater.

Preparation of manganese-oxides-coated magnetic microcrystalline cellulose via KMnO4 modification: Improving the counts of the acid groups and adsorption efficiency for Pb(II)

Herein, the manganese-oxides-coated magnetic microcrystalline cellulose (MnOx@Fe₃O₄@MCC) was prepared by coprecipitation and subsequently modified with KMnO₄ solution at room temperature, which was in turn applied for the removal of Pb(II) from wastewater. The adsorption properties of Pb(II) on MnOx@Fe₃O₄@MCC were investigated. The kinetics and isothermal data of Pb(II) were described well by the Pseudo-second-order model and the Langmuir isotherm model, respectively. At pH = 5, 318 K, the Langmuir maximum Pb(II) adsorption capacity of MnOx@Fe₃O₄@MCC was 446.43 mg/g, which is higher than many documented bio-based adsorbents. The results of Fourier transform infra-red and X-ray photoelectron spectroscopy indicated that the adsorption mechanisms for Pb(II) mainly involved surface complexation, ion exchange, electrostatic interaction and precipitation. Interestingly, the increased amount of carboxyl group on the surface of microcrystalline cellulose modified by KMnO₄ was one of the important reasons for the high Pb(II) adsorption performance of MnOx@Fe₃O₄@MCC. Furthermore, MnOx@Fe₃O₄@MCC exhibited excellent activity (70.6 %) after five consecutive regeneration cycles, indicating its high stability and reusability. Endorsing to the cost-effectiveness, environmentally friendliness, and reusable nature, MnOx@Fe₃O₄@MCC can be counted as a great alternative contender for the remediation of Pb(II) from industrial wastewater.

Recent Advances in Nanomaterial-Based Sensing for Food Safety Analysis

The increasing public attention on unceasing food safety incidents prompts the requirements of analytical techniques with high sensitivity, reliability, and reproducibility to timely prevent food safety incidents occurring. Food analysis is critically important for the health of both animals and human beings. Due to their unique physical and chemical properties, nanomaterials provide more opportunities for food quality and safety control. To date, nanomaterials have been widely used in the construction of sensors and biosensors to achieve more accurate, fast, and selective food safety detection. Here, various nanomaterial-based sensors for food analysis are outlined, including optical and electrochemical sensors. The discussion mainly involves the basic sensing principles, current strategies, and novel designs. Additionally, given the trend towards portable devices, various smartphone sensor-based point-of-care (POC) devices for home care testing are discussed.

Construction of a Carbon/Lignosulfonate Adsorbent to Remove Pb2+ and Cu2

Removing heavy metal ions from water is an important issue to improve water quality. However, using cost-effective and more environmentally friendly adsorbents to achieve efficient adsorption capacity remains a challenge. Carbon spheres were prepared by the hydrothermal method and then combined with sodium lignosulfonate to form a lignosulfonate carbon (C/SL) adsorbent. C/SL achieved the adsorption of Pb²⁺ and Cu²⁺ after 60 min (the adsorption capacity was 281 mg g^-1 for Pb²⁺ and 276mg g^-1 for Cu²⁺) and had good selectivity and reusability (5 cycles). The simulated experimental data show that the pseudo-second-order kinetics and Langmuir isotherm are closer to the actual adsorption. Thermodynamic studies show that the adsorption of Pb²⁺ and Cu²⁺ is enhanced by the spontaneous process at higher temperature. This study also shows that functional groups such as hydroxyl and amino groups play an important role in the adsorption process.