Efficient uptake of NH3 by dual active sites NH4SCN-imidazole deep eutectic solvents with low viscosity

Porous acid-base hybrid polymers for enhanced NH3 uptake with assistance from cooperative hydrogen bonds

Carboxylic acid-modified materials are a common means of achieving efficient NH3 adsorption. In this study, we report that improved NH3 adsorption capacity and easier desorption can be achieved through the introduction of substances containing Lewis basic groups into carboxylic acid-modified materials. Easily synthesized mesoporous acid-base hybrid polymers were constructed with polymers rich in carboxylic acid and Lewis base moieties through cooperative hydrogen bonding interactions (CHBs). The hybrid polymer PAA-P4VP presented higher NH3 capacity (18.2 mmol g-1 at 298 K and 1 bar NH3 pressure) than PAA (6.0 mmol g-1) through the acid-base reaction and the assistance from CHBs with NH3, while the NH3 desorption from PAA-P4VP was easier for the reformation of CHBs. Based on the introduction of CHBs, a series of mesoporous acid-base hybrid polymers was synthesized with NH3 adsorption capacity of 15.8-19.3 mmol g-1 and high selectivity of NH3 over CO2 (SNH3/CO2 = 25.4-56.3) and N2 (SNH3/N2 = 254-1068), and the possible co-existing gases, such as SO2, had a lower effect on NH3 uptake by hybrid polymers. Overall, the hybrid polymers present efficient NH3 adsorption owing to the abundant acidic moieties and CHBs, while the concomitant Lewis bases promote NH3 desorption.

Condensable Gases Capture with Ionic Liquids

Condensable gases are the sum of condensable and volatile steam or organic compounds, including water vapor, which are discharged into the atmosphere in gaseous form at atmospheric pressure and room temperature. Condensable toxic and harmful gases emitted from petrochemical, chemical, packaging and printing, industrial coatings, and mineral mining activities seriously pollute the atmospheric environment and endanger human health. Meanwhile, these gases are necessary chemical raw materials; therefore, developing green and efficient capture technology is significant for efficiently utilizing condensed gas resources. To overcome the problems of pollution and corrosion existing in traditional organic solvent and alkali absorption methods, ionic liquids (ILs), known as "liquid molecular sieves", have received unprecedented attention thanks to their excellent separation and regeneration performance and have gradually become green solvents used by scholars to replace traditional absorbents. This work reviews the research progress of ILs in separating condensate gas. As the basis of chemical engineering, this review first provides a detailed discussion of the origin of predictive molecular thermodynamics and its broad application in theory and industry. Afterward, this review focuses on the latest research results of ILs in the capture of several important typical condensable gases, including water vapor, aromatic VOCs (i.e., BTEX), chlorinated VOC, fluorinated refrigerant gas, low-carbon alcohols, ketones, ethers, ester vapors, etc. Using pure IL, mixed ILs, and IL + organic solvent mixtures as absorbents also briefly expanded the related reports of porous materials loaded with an IL as adsorbents. Finally, future development and research directions in this exciting field are remarked.

An Efficient Technique for Ammonia Capture in the Haber-Bosch Process Loop-Membrane-Assisted Gas Absorption

The present study continues the development and enhancement of a highly efficient unique hybrid technique-membrane-assisted gas absorption in designing the separation unit, which provides the improvement in mass-transfer of a target component during the ammonia capture process from a process loop of the Haber-Bosch technological route. In order to minimize the absorbent volume to membrane area ratio, the special separation cell was designed based on a combination of two types of hollow fiber membranes, dense gas separation membrane and porous pervaporation membrane. The separation performance tests were implemented under two sets of conditions, sweeping the bore (permeate) side of a cell with helium and hydrogen-nitrogen mix. For both cases, the membrane-assisted gas absorption cell demonstrated high separation efficiency, and the ammonia concentration in the permeate was never lower than 81 mol%; meanwhile, under the hydrogen-nitrogen bore sweep conditions, the ammonia concentration in the permeate reached 97.5 mol% in a single-step process. Nevertheless, there is a product purity-recovery rate trade-off, which is a typical issue for separation processes.

Investigation of NH3 absorption by protic imidazolium thiocyanate-based deep eutectic solvents with multiple binding sites and low viscosity

Protic [Im][SCN]-based DESs with multiple binding sites and low viscosity for NH3 capture and separation are reported.