Direct conversion of cellulose to levulinic acid using SO3H-functionalized ionic liquids containing halogen-anions

Acidic natural deep eutectic solvents as dual solvents and catalysts for the solubilization and deglycosylation of soybean isoflavone extracts: Genistin as a model compound

This study investigated the possibility of using green solvent natural deep eutectic solvents (NADESs) as dual solvent-catalysts for the solubilization and deglycosylation of soybean isoflavones. The deglycosylation behavior of genistin as a model compound in NADESs was compared. Acidic NADESs showed moderate solubility for genistin and could hydrolyze it to form genistein. The onset temperature of deglycosylation in the choline chloride/malic acid (Ch-Ma) was 60 °C. The solubilities of genistin in the Ch-Ma system were modeled. The dissolution process was endothermic and mainly enthalpy-driven. The deglycosylation followed first-order kinetics with a half-life (t_1/2) of 40 min at 90 °C. The method was validated using soybean isoflavone extracts as a substrate and the ratio of glycoside to aglycone in the extracts could be adjusted by changing the conditions. The methods have great potential in the extraction and preparation of ready-to-use isoflavone extracts from soybean and other legumes.

Microwave radiation-assisted synthesis of levulinic acid from microcrystalline cellulose: Application to a melon rind residue

The circular economy considers waste to be a new raw material for the development of value-added products. In this context, agroindustrial lignocellulosic waste represents an outstanding source of new materials and platform chemicals, such as levulinic acid (LA). Herein we study the microwave (MW)-assisted acidic conversion of microcrystalline cellulose (MCC) into LA. The influence of acidic catalysts, inorganic salt addition and ball-milling pre-treatment of MCC on LA yield was assessed. Depolymerization and disruption of cellulose was monitored by FTIR, TGA and SEM, whereas the products formed were analyzed by HPLC and NMR spectroscopy. The parameters that afforded the highest LA yield (48 %, 100 % selectivity) were: ball-milling pre-treatment of MCC for 16 min at 600 rpm, followed by MW-assisted thermochemical treatment for 20 min at 190 °C, aqueous p-toluenesulfonic acid (p-TSA) 0.25 M as catalyst and saturation with KBr. These optimal conditions were further applied to a lignocellulosic feedstock, namely melon rind, to afford a 51 % yield of LA. These results corroborate the suitability of this method to obtain LA from agroindustrial wastes, in line with a circular economy-based approach.

Size controllable synthesis of ZSM-5 zeolite and its catalytic performance in the reaction of methanol conversion to aromatics

ZSM-5 zeolites were hydrothermally synthesized with commercial silica sol, and the crystal size was controlled by adding silicalite-1 seed in the synthetic system. The crystal size of ZSM-5 was affected by the crystallization time of seed, seed content and seed size. ZSM-5 zeolites with controllable particle size in the range of 200-2200 nm could be obtained. The prepared samples with different particle sizes were used for the reaction of methanol conversion to aromatics (MTA). The results suggested that the HZSM-5 catalyst with small crystal size showed much longer catalyst lifetime and higher selectivity for C5 + hydrocarbons and aromatics, especially C9 + aromatics in the MTA reaction. Moreover, the introduction of zinc (Zn) into the HZSM-5 zeolites can considerably promote the selectivity to aromatics in the products. Zn modified HZSM-5 zeolites with different Zn loading amounts were prepared by the incipient wetness impregnation method, and the highest aromatics selectivity was obtained when the Zn loading was 1.0%. The improvement of methanol aromatization was ascribed to the synergistic effect of Brønsted acid sites and the newly formed Zn-Lewis acid sites.

Novel porous organic polymers functionalized by metalloporphyrin and phosphonium salts for the efficient synergistic catalysis of CO2 conversion under mild conditions

Metalloporphyrin- and phosphonium-functionalized porous organic polymers (POPs) were fabricated successfully via a post-synthesis modification strategy, which were demonstrated to be efficient heterogeneous catalysts for CO2 conversion.

Polyamine-functionalized imidazolyl poly(ionic liquid)s for the efficient conversion of CO2 into cyclic carbonates

The synergistic effect of polyamine groups and nucleophile (Br−) significantly improved the catalytic performance of N4-PIL-2, which can convert epoxides into cyclic carbonates with excellent yields and selectivity under ambient pressure.