Density functional theory and molecular dynamics simulation studies of bio-based fatty hydrazide-corrosion inhibitors on Fe (1 1 0) in acidic media

Effect of geometric isomerism on the anticancer property of new platinum complexes with glycine derivatives as asymmetric N, O donate ligands against human cancer

In this project, to fallow the anticancer ability of new Pt drugs, several new Pt complexes were synthesized with the asymmetric bidentate glycine derivatives, as named propyl- and hexyl glycine (L), in the general formula: [Pt(NH3)2(L)]NO3, and cis- and trans-[Pt(L)2]. The structure of two cis- and trans-[Pt(propylgly)2] complexes was proved by single crystallography analysis. However, all complex structures were characterized by various methods of 1H NMR, 13C NMR, 195Pt NMR, FTIR, LC-Mass, and Raman spectroscopy. To study the passage of water-soluble complexes of [Pt(NH3)2(L)]NO3 via cell membrane, their solubility, and lipophilicity were analyzed. In addition, the cytotoxic properties of these complexes were evaluated against normal and malignant cell lines (skin, breast, and lung cancer cells). The results indicated that they were either comparable to cisplatin or less damaging than carboplatin and oxaliplatin. It was expected that due to less steric effect, and the presence of length aliphatic hydrocarbon chain in the complex structure, trans-[Pt(hexylgly)2] is more toxic on cancerous cell lines than trans-[Pt(propylgly)2]. Cellular accumulation of all complexes was evaluated on A549 and MCF7 cell lines, and the amount of platinum metal (ng) was measured by the ICP method. Results showed that trans-[Pt(hexylgly)2] complex has the highest accumulation inside both mentioned cell lines and [Pt(NH3)2(L)]NO3 complexes behave like clinical Pt-drugs. Ultimately, the interaction patterns of DNA were examined using spectroscopic methods and molecular docking simulations for all substances.

Polymeric surfactants as ideal substitutes for sustainable corrosion protection: A perspective on colloidal and interface properties

Surfactants are well known for their colloidal and corrosion inhibition potential (CIP) due to their strong propensity to interact with metallic surfaces. However, because of their small molecular size and the fact that they are only effective at relatively high concentrations, their application in aqueous phase corrosion inhibition is often restricted. Polymeric surfactants, a unique class of corrosion inhibitors, hold the potential to eradicate the challenges associated with using surfactants in corrosion inhibition. They strongly bond with the metallic surface and offer superior CIP because of their macromolecular polymeric structure and abundance of polar functional groups. In contrast to conventional polymeric corrosion inhibitors, the inclusion of polar functional groups also aids in their solubilization in the majority of popular industry-based electrolytes. Some of the major functional groups present in polymeric surfactants used in corrosion mitigation include O (ether), glycidyl (cyclic ether), -CONH2 (amide), -COOR (ester), -SO3H (sulfonic acid), -COOH (carboxyl), -NH2 (amino), - + NR3/- + NHR2/- + NH2R/- + NH3 (quaternary ammonium), -OH (hydroxyl), -CH2OH (hydroxymethyl), etc. The current viewpoint offers state-of-the-art information on polymer surfactants as newly developing ideal alternatives for conventional corrosion inhibitors. The industrial scale-up, colloidal, coordination, adsorption properties, and structural requirements of polymer surfactants have also been established based on the knowledge obtained from the literature. Finally, the challenges, drawbacks, and potential benefits of using polymer surfactants have also been discussed.

Density Functional Theory Studies on New Possible Biobased Gemini Corrosion Inhibitors Derived from Fatty Hydrazide Derivatives

Several new possible biobased corrosion inhibitors derived from fatty hydrazide derivatives were analyzed using quantum chemical calculations via the density functional theory method to investigate the chemical reactivity and inhibition efficiencies against corrosion in metal steel. The study confirmed that the fatty hydrazides showed significant inhibitive performances based on their electronic properties, revealing band gap energies of 5.20 to 7.61 eV between the HOMO and LUMO. These energy differences decreased from 4.40 to 7.20 eV when combined with substituents of varying chemical compositions, structures, and functional groups, associated with higher inhibition efficiency. The most promising fatty hydrazide derivatives are terephthalic acid dihydrazide combined with a long-chain alkyl chain, which resulted in the lowest energy difference of 4.40 eV. Further inspection showed that the fatty hydrazide derivatives' inhibitive performances increased with increasing carbon chain length [from 4 (4-s-4) to 6 (6-s-6)], with a concomitant increase and decrease in hydroxyl and carbonyl groups, respectively. Fatty hydrazide derivatives containing aromatic rings also showed increased inhibition efficiencies following their contribution to improve the compounds' binding ability and adsorption on the metal surface. Overall, all data were consistent with previously reported findings, envisaging the potential of fatty hydrazide derivatives as effective corrosion inhibitors.

DFT Calculation and MD Simulation Studies on Gemini Surfactant Corrosion Inhibitor in Acetic Acid Media

Gemini surfactant corrosion inhibitor (CI) is one type of CI mainly used in mitigating corrosion in the complex system of oil/gas production industries. Computer modeling methods such as density functional theory (DFT) calculation and molecular dynamic (MD) simulation are required to develop new CI molecules focusing on their application condition as a prediction or screening process before the physical empirical assessment. In this work, the adsorption inhibition efficiencies of two monomer surfactants (2B and H) and their respective Gemini structures with the addition of different spacers (alkyl, benzene, ester, ether, and ketone) are investigated using DFT calculation and MD simulation method in 3% sodium chloride (NaCl), and 1500 ppm acetic acid solutions. In DFT calculation, 2B-benzene molecules are assumed to have the most promising inhibition efficiency based on their high reactivity and electron-donating ability at their electron-rich benzene ring region based on the lowest bandgap energy (0.765 eV) and highest HOMO energy value (-2.879 eV), respectively. DFT calculation results correlate with the adsorption energy calculated from MD simulation, where 2B-benzene is also assumed to work better as a CI molecule with the most adsorption strength towards Fe (110) metal with the highest negative adsorption energy value (-1837.33 kJ/mol at temperature 323 K). Further, diffusion coefficient and molecular aggregation analysis in different CI concentrations through MD simulation reveals that only a small amount of Gemini surfactant CI is needed in the inhibition application compared to its respective monomer. Computer simulation methods successfully predict and screen the Gemini surfactant CI molecules that can work better as a corrosion inhibitor in acetic acid media. The amount of Gemini surfactant CI that needs to be used is also predicted. The future planning or way forward from this study will be the development of the most promising Gemini surfactant CI based on the results from DFT calculation and MD simulations.

Synthesis, DFT study, theoretical and experimental spectroscopy of fatty amides based on extra-virgin olive oil and their antibacterial activity

Medication products from natural materials are preferred due to their minimal side effects. Extra-virgin olive oil (EVOO) is a highly acclaimed Mediterranean diet and a common source of lipids that lowers morbidity and disease severity. This study synthesised two fatty amides from EVOO: hydroxamic fatty acids (FHA) and fatty hydrazide hydrate (FHH). The Density Functional Theory (DFT) was applied to quantum mechanics computation. Nuclear magnetic resonance (NMR), Fourier transforms infrared (FTIR), and element analysis were used to characterise fatty amides. Likewise, the minimum inhibitory concentration (MIC) and timing kill assay were determined. The results revealed that 82 % for FHA and 80 % for FHH conversion were achieved. The amidation reagent/EVOO ratio (mmol: mmol) was 7:1, using the reaction time of 12 h and hexane as an organic solvent. The results further revealed that fatty amides have high antibacterial activity with low concentration at 0.04 μg/mL during eight h of FHA and 0.3 μg/mL during ten h of FHH. This research inferred that FHA and FHH could provide an alternative and effective therapeutic strategy for bacterial diseases. Current findings could provide the basis for the modernisation/introduction of novel and more effective antibacterial drugs derived from natural products.

Coco Monoethanolamide Surfactant as a Sustainable Corrosion Inhibitor for Mild Steel: Theoretical and Experimental Investigations

Recent studies indicate that surfactants are a relatively new and effective class of corrosion inhibitors that almost entirely meet the criteria for a chemical to be used as an aqueous phase corrosion inhibitor. They possess the ideal hydrophilicity to hydrophobicity ratio, which is crucial for effective interfacial interactions. In this study, a coconut-based non-ionic surfactant, namely, coco monoethanolamide (CMEA), was investigated for corrosion inhibition behaviour against mild steel (MS) in 1 M HCl employing the experimental and computational techniques. The surface morphology was studied employing the scanning electron microscope (SEM), atomic force microscope (AFM), and contact measurements. The critical micelle concentration (CMC) was evaluated to be 0.556 mM and the surface tension corresponding to the CMC was 65.28 mN/m. CMEA manifests the best inhibition efficiency (η%) of 99.01% at 0.6163 mM (at 60 °C). CMEA performs as a mixed-type inhibitor and its adsorption at the MS/1 M HCl interface followed the Langmuir isotherm. The theoretical findings from density functional theory (DFT), Monte Carlo (MC), and molecular dynamics (MD) simulations accorded with the experimental findings. The MC simulation's assessment of CMEA's high adsorption energy (-185 Kcal/mol) proved that the CMEA efficiently and spontaneously adsorbs at the interface.

Cucumber (Cucumis sativus L.) Leaf Extract as a Green Corrosion Inhibitor for Carbon Steel in Acidic Solution: Electrochemical, Functional and Molecular Analysis

An extract of cucumber leaves (ECSL) was prepared as a green corrosion inhibitor for carbon steel. Its carbon steel corrosion inhibition performance against 0.5 mol L⁻¹ H₂SO₄ was investigated using electrochemical methods and scanning electron microscopy (SEM). Its composition was analyzed by gas chromatography and mass spectroscopy (GC−MS). Quantum chemical calculations and molecular dynamics simulations (MDS) were conducted to elucidate the adsorption mechanism of the inhibitor molecules on the carbon steel surface. The results indicated that the inhibition efficiency increases with its increasing concentration. The extract acted as a mixed type corrosion inhibitor, and its inhibition properties were ascribed to the geometric coverage effect induced by its adsorption on the metal surface in accordance with Langmuir’s law. The active components in the extract were identified as mainly organic compounds with functional groups such as aromatic moieties and heteroatoms. The inhibition activities of ECSL are delivered through the ability of the active components to adsorb on the metal surface through their functional groups to form a protective layer which hinders the contact of aggressive substances with carbon steel and thus suppresses its corrosion. This research provides an important reference for the design of green corrosion inhibitors based on plant waste materials.