Trihexyl(tetradecyl)phosphonium bis-2,4,4-(trimethylpentyl)phosphinate micellar behavior in the extraction of Ag(I) from acidic nitrate media

Recovery of copper and silver from industrial e-waste leached solutions using sustainable liquid membrane technology: a review

Waste electrical and electronic equipment or e-waste has recently emerged as a significant global concern. This waste contains various valuable metals, and via recycling, it could become a sustainable resource of metals (viz. copper, silver, gold, and others) while reducing reliance on virgin mining. Copper and silver with their superior electrical and thermal conductivity have been reviewed due to their high demand. Recovering these metals will be beneficial to attain the current needs. Liquid membrane technology has appeared as a viable option for treating e-waste from various industries as a simultaneous extraction and stripping process. It also includes extensive research on biotechnology, chemical and pharmaceutical, environmental engineering, pulp and paper, textile, food processing, and wastewater treatment. The success of this process depends more on the selection of organic and stripping phases. In this review, the use of liquid membrane technology in treating/recovering copper and silver from industrial e-waste leached solutions was highlighted. It also assembles critical information on the organic phase (carrier and diluent) and stripping phase in liquid membrane formulation for selective copper and silver. In addition, the utilization of green diluent, ionic liquids, and synergist carrier was also included since it gained prominence attention latterly. The future prospects and challenges of this technology were also discussed to ensure the industrialization of technology. Herein, a potential process flowchart for the valorization of e-waste is also proposed.

The Use of Polymer Membranes for the Recovery of Copper, Zinc and Nickel from Model Solutions and Jewellery Waste

A polymeric inclusion membrane (PIM) consisting of matrix CTA (cellulose triacetate), ONPPE (o-nitrophenyl pentyl ether) and phosphonium salts (Cyphos 101, Cyphos 104) was used for separation of Cu(II), Zn(II) and Ni(II) ions. Optimum conditions for metal separation were determined, i.e., the optimal concentration of phosphonium salts in the membrane, as well as the optimal concentration of chloride ions in the feeding phase. On the basis of analytical determinations, the values of parameters characterizing transport were calculated. The tested membranes most effectively transported Cu(II) and Zn(II) ions. The highest recovery coefficients (RF) were found for PIMs with Cyphos IL 101. For Cu(II) and Zn(II), they are 92% and 51%, respectively. Ni(II) ions practically remain in the feed phase because they do not form anionic complexes with chloride ions. The obtained results suggest that there is a possibility of using these membranes for separation of Cu(II) over Zn(II) and Ni(II) from acidic chloride solutions. The PIM with Cyphos IL 101 can be used to recover copper and zinc from jewellery waste. The PIMs were characterized by AFM and SEM microscopy. The calculated values of the diffusion coefficient indicate that the boundary stage of the process is the diffusion of the complex salt of the metal ion with the carrier through the membrane.

Extraction of Palladium(II) with a Magnetic Sorbent Based on Polyvinyl Alcohol Gel, Metallic Iron, and an Environmentally Friendly Polydentate Phosphazene-Containing Extractant

In this work, a highly efficient and environmentally friendly method for extracting palladium from hydrochloric acid media was developed. The method uses a magnetic sorbent carrying an organophosphorus extractant, which is not washed from the sorbent into the aqueous phase. The extractant was characterized by 1H, 13C, and 31P NMR spectroscopy and MALDI TOF mass spectrometry, and the palladium complex based on it was characterized by IR spectroscopy. According to an in vitro microbiological study, the extractant was non-toxic to soil microflora. It was established that the water uptake and saturation magnetization of the magnetic sorbent were sufficient for use in sorption processes. The sorption efficiency of palladium(II) with the developed sorbent can reach 71% in one cycle. After treatment of the spent sorbent with 5 M hydrochloric acid, palladium was completely extracted from the sorbent. The new sorbent is proposed for the extraction of palladium from hydrochloric acid media obtained by the leaching of electronic waste.