Engineering three-dimensional superstructure of Pd aerogel with enhanced performance for ethanol electrooxidation

Fe-Pd nanoflakes decorated on leached graphite disks for both methanol and formic acid electrooxidation with excellent electrocatalytic performance

This paper introduces a unique and simple method for fabricating of inexpensive electrocatalysts for use in direct methanol fuel cells. The leached Fe1-Pd1 NFs/graphite (leached Fe1-Pd1/graphite) disk electrode was successfully obtained via uniform dispersion of Zn powder into the matrix of commercial graphite powder (98%), pressing under optimized pressure followed by the treatment in H2SO4 solution containing Fe+2 and Pd+2 cations, leading to the partial leaching out of Zn from graphite matrix, as well as partial electroless substitution of Fe-Pd nanoflakes with Zn metal. Based on the morphology studies, binary Fe-Pd nanoflakes with a large surface area uniformly dispersed on the leached graphite disk. The leached Fe-Pd/G disk showed the exceptional electrocatalytic activity toward methanol and formic acid oxidation without electrocatalyst poisoning being observed, in contrast to the leached Pd/graphite and leached Fe/graphite disks. This is due to the high surface area, and synergistic effect of Pd and Fe. The findings of this work may be used for the mass manufacture of graphite-based disks for commercial fuel cell applications using available graphite powders. The linear range of washed Fe1-Pd1/G electrocatalyst for measuring methanol was about 0.1-1.3 M, and its detection limit was calculated at about 0.03 M. Furthermore, the linear range of the nanocatalyst for measuring formic acid was about 0.02-0.1 M, and its detection limit was calculated at about 0.006 M.

Black phosphorous/palladium functionalized carbon aerogel nanocomposite for highly efficient ethanol electrooxidation

Direct ethanol fuel cells have great potential for practical power applications due to their easy operation, high energy density, and low toxicity. However, the slow and incomplete ethanol electrooxidation (EEO) reaction is a major drawback that hinders the development of this type of fuel cell. Here, we report a facile approach for the preparation of highly active, low cost and stable electrocatalysts based on palladium (Pd) nanoparticles and black phosphorus/palladium (BP/Pd) nanohybrids supported on a carbon aerogel (CA). The nanocomposites show remarkable catalytic performance and stability as anode electrocatalysts for EEO in an alkaline medium. A mass peak current density of 8376 mA mg_Pd ^-1 is attained for EEO on the BP/Pd/CA catalyst, which is 11.4 times higher than that of the commercial Pd/C catalyst. To gain deep insight into the structure-property relationship associated with superior electroactivity, the catalysts are well characterized in terms of morphology, surface chemistry, and catalytic activity. It is found that the BP-doped CA support provides high catalyst dispersibility, protection against leaching, and modification of the electronic and catalytic properties of Pd, while the catalyst modifies CA into a more open and conductive structure. This synergistic interaction between the support and the catalyst improves the transport of active species and electrons at the electrode/electrolyte interface, leading to rapid EEO reaction kinetics.