Triphenylamine-based conjugated fluorescent sensor for highly sensitive detection of water in organic solvents

Fluorescence sensing of water in various organic solvents based on a novel cyclic polymer

A sensor capable of sensing of water in various organic solvents ranging from water-soluble to water-miscible solvents is still a challenging task. In this research, a cyclic polymer fluorescence chemosensor (CPFC) has been developed for sensing of water by turn-on model in 9 organic solvents and turn-off model in DMA, where the broadest concentration range and the lowest detection limit was obtained for water in DMA (10 %-90 %) and dioxane (0.011 %), respectively. The sensing mechanism is explored by theory calculation and experimental investigation. The amphiphilic nature endows the polymer probe with great potential for measuring various contaminants from aqueous and nonaqueous mediums. Furthermore, the present search highlights the potential applications of cyclic polymer as fluorescence probes in the field of sensing.

High-level reverse intersystem crossing of charge transfer compounds: to fluoresce or not to fluoresce?

Thermally activated delayed fluorescence (TADF) has been widely applied to electroluminescent materials to take the best advantage of triplet excitons. For some materials, the TADF originates from high-level reverse intersystem crossing (hRISC), and has attracted much attention due to its high efficiency for utilizing the triplet excitons. However, reports concerning the mechanistic studies on the hRISC-TADF process and structure-property correlation are sparse. In this study, we prepared three compounds containing triphenylamine and benzophenone with different substitution positions, o-TPA-BP, m-TPA-BP, and p-TPA-BP, in which only p-TPA-BP displays strong luminescence and hRISC-TADF features. To investigate the mechanism of the substituent-position-dependent hRISC-TADF, ultrafast time-resolved spectroscopy was utilized to observe the deactivation pathways with the assistance of theoretical calculations. The results show that o-TPA-BP will not generate triplet species, and the triplet species for m-TPA-BP will rapidly deactivate. Only p-TPA-BP can transition back to the singlet state from the T2 state effectively and exhibit a large gap between T1 and T2 to favor the hRISC route. These results illustrate how the substitution position affects the ISC and further influences the luminescence properties, which can provide new insights for developing new high-efficiency luminescent materials.

Synthesis, Photophysical Properties, Theoretical Studies, and Living Cancer Cell Imaging Applications of New 7-(Diethylamino)quinolone Chalcones

In this article, three unsymmetrical 7-(diethylamino)quinolone chalcones with D-π-A-D and D-π-A-π-D type push-pull molecular arrangements were synthesized via a Claisen-Schmidt reaction. Using 7-(diethylamino)quinolone and vanillin as electron donor (D) moieties, these were linked together through the α,β-unsaturated carbonyl system acting as a linker and an electron acceptor (A). The photophysical properties were studied, revealing significant Stokes shifts and strong solvatofluorochromism caused by the ICT and TICT behavior produced by the push-pull effect. Moreover, quenching caused by the population of the TICT state in THF-H2O mixtures was observed, and the emission in the solid state evidenced a red shift compared to the emission in solution. These findings were corroborated by density functional theory (DFT) calculations employing the wb97xd/6-311G(d,p) method. The cytotoxic activity of the synthesized compounds was assessed on BHK-21, PC3, and LNCaP cell lines, revealing moderate activity across all compounds. Notably, compound 5b exhibited the highest activity against LNCaP cells, with an LC50 value of 10.89 μM. Furthermore, the compounds were evaluated for their potential as imaging agents in living prostate cells. The results demonstrated their favorable cell permeability and strong emission at 488 nm, positioning them as promising candidates for cancer cell imaging applications.

Visual detection of water content in liquor with near-infrared fluorescence sensor assisted by smartphone

Water content was an essential indicator in organic solvents, and it was necessary to develop a facile, cheap and readily available tool for the real-time, specifical and sensitive detection of water content. In this work, two novel D-π-A type near-infrared fluorescence sensors (DCM-1 and DCM-2) were designed and synthesized for the detection of trace water in organic solvents. DCM-1 and DCM-2 with solvent-dependent effects and large Stokes shift (>120 nm) showed good linear "intensity-to-content" relationships in four commonly-used organic solvents, and accomplished the ultra-fast and high-accuracy detection of the trace water in organic solvents. More importantly, a portable, fast, and accurate smartphone-assisted visual assay was designed for visual quantitative detection of the water content in organic solvents with a detection limit as low as 1.028 % v/v (e.g. in ethanol) and a wide detection range (0-60 % v/v). The smartphone-based visual assay was further applied to estimate the water content in disinfection alcohol and commercial liquor, which furnished a new strategy and broad prospects to achieve the accurate onsite detection of water content.

Study on the modulating effect of halogen atom substitution on the detection range of water content detection probes in organic solvents

Fluorescence probes based on the variations of aggregation state (Aggregation-Induced Emission (AIE) and Aggregation-Caused Quenching (ACQ)) have received widespread attention due to their simplicity, efficiency and intuitiveness. However, typical probes are highly sensitive to changes in polarity and slight variations in the external environment can cause a complete change in the aggregation state. With the aim of expanding the detection range of the molecular probe, this work adopts a different design strategy from adjusting the molecular backbone but regulates the fluorescence behavior of the Schiff base molecular backbone by introducing different halogen atoms. Systematic studies show that when chlorine serves as substitutional atoms (3,5-Cl Salen), the probe can achieve full-range detection of water content (0-100 vol%) in ethanol and DMF. To our knowledge, the 3,5-Cl Salen represents the best water content probe in organic molecules. Experimental and theoretical studies have shown that the adjustment of halogen atoms can linearly change the charge distribution on the benzene ring and precisely control the strength of intermolecular interactions. At the same time, we developed a fluorescent filter paper based on 3,5-Cl Salen and used smartphones for rapid, sensitive and precise on-site measurement of water content in organic solvents.

Paper-based sensor based on lead-free manganese halide for the determination of water content in organic solvents

A highly stable and luminescent lead-free manganese(II) halide hybrid MnBr₄(TMN)₂ (C₃₄H₄₂Br₄MnN₄) was designed and synthesized by introducing a large cationic organic spacer. The MnBr₄(TMN)₂ displays high luminescence with quantum yields up to 77% and possesses turn-off fluorescence behavior (E_x/E_m=365/546 nm) for water. These properties make the MnBr₄(TMN)₂ a promising candidate as an alternative indicator for the detection of water with potential applications for the fabrication of LEDs. Herein, a paper-based sensor based on MnBr₄(TMN)₂ is described for the determination of water content in organic solvents. The mechanism of water sensing can be tentatively explained by fluorescence quenching originating from the destruction of water due to the Mn-Br bonds of MnBr₄(TMN)₂. The MnBr₄(TMN)₂-based paper sensor exhibits an excellent discrimination ability of water content in the range 0-25.0% with a detection limit of 0.27%. Satisfactory recoveries (94.91±4.09% to 103.23±2.38%) are obtained in spiked ethanol solvent samples, which demonstrate that the MnBr₄(TMN)₂-based paper sensor is capable of detecting water content in real ethanol solvent samples.