Molecular structure, spectral studies, NBO, HOMO–LUMO profile, MEP and Mulliken analysis of 3β,6β-dichloro-5α-hydroxy-5α–cholestane

Fused ring effect on optical nonlinearity and structure property relationship of anthracenyl chalcone based push-pull chromophores

The Ultraviolet-visible (UV-Vis) spectra indicate that anthracenyl chalcones (ACs) have high maximum wavelengths and good transparency windows for optical applications and are suitable for optoelectronic applications owing to their HOMO–LUMO energy gaps (2.93 and 2.76 eV). Different donor substituents on the AC affect their dipole moments and nonlinear optical (NLO) responses. The positive, negative, and neutral electrostatic potential regions of the molecules were identified using molecular electrostatic potential (MEP). The stability of the molecule on account of hyperconjugative interactions and accompanying charge delocalization was analyzed using natural bond orbital (NBO) analysis. Open and closed aperture Z-scans were performed using a continuous-wave frequency-doubled diode-pumped solid-state (DPSS) laser to measure the nonlinear absorption and nonlinear refractive index coefficients, respectively. The valley-to-peak profile of AC indicated a negative nonlinear refractive index coefficient. The obtained single crystals possess reverse saturation absorption due to excited-state absorption. The structural and nonlinear optical properties of the molecules have been discussed, along with the role of anthracene substitution for enhancing the nonlinear optical properties. The calculated third-order susceptibility value was 1.10 x10^-4 esu at an intensity of 4.1 kW/cm², higher than the reported values for related chalcone derivatives. The NLO response for both ACs offers excellent potential in optical switching and limiting applications.

Solution and Solid-State Photophysical Properties of Positional Isomeric Acrylonitrile Derivatives with Core Pyridine and Phenyl Moieties: Experimental and DFT Studies

The compounds I (Z)-2-(phenyl)-3-(2,4,5-trimethoxyphenyl)acrylonitrile with one side (2,4,5-MeO-), one symmetrical (2Z,2'Z)-2,2'-(1,4-phenylene)bis(3-(2,4,5-trimethoxyphenyl)acrylonitrile), II (both sides with (2,4,5-MeO-), and three positional isomers with pyridine (Z)-2-(pyridin-2- 3, or 4-yl)-3-(2,4,5-trimethoxyphenyl)acrylonitrile, III-V were synthetized and characterized by UV-Vis, fluorescence, IR, H1-NMR, and EI mass spectrometry as well as single crystal X-ray diffraction (SCXRD). The optical properties were strongly influenced by the solvent (hyperchromic and hypochromic shift), which were compared with the solid state. According to the solvatochromism theory, the excited-state (μe) and ground-state (μg) dipole moments were calculated based on the variation of Stokes shift with the solvent's relative permittivity, refractive index, and polarity parameters. SCXRD analyses revealed that the compounds I and II crystallized in the monoclinic system with the space group, P21/n and P21/c, respectively, and with Z = 4 and 2. III, IV, and V crystallized in space groups: orthorhombic, Pbca; triclinic, P-1; and monoclinic, P21 with Z = 1, 2, and 2, respectively. The intermolecular interactions for compounds I-V were investigated using the CCDC Mercury software and their energies were quantified using PIXEL. The density of states (DOS), molecular electrostatic potential surfaces (MEPS), and natural bond orbitals (NBO) of the compounds were determined to evaluate the photophysical properties.

Comparative analyses of new donor-π-acceptor ferrocenyl-chalcones containing fluoro and methoxy-fluoro acceptor units as synthesized dyes for organic solar cell material

Two organometallic compounds known as (E)-1-ferrocenyl-(3-fluorophenyl)prop-2-en-1-one (Fc1) and (E)-1-ferrocenyl-(3-fluoro-4-methoxyphenyl)prop-2-en-1-one (Fc2) are designed and synthesized for application in dye-sensitized solar cell (DSSC) based on a donor-π-acceptor (D-π-A) architecture. By strategically introducing a methoxy group into the acceptor side of the compound, Fc2 which has adopted a D-π-A-AD structure are compared with the basic D-π-A structure of Fc1. Both compounds were characterized by utilizing the IR, NMR and UV-Vis methods. Target compounds were further investigated by X-ray analysis and studied computationally using Density Functional Theory (DFT) and Time-Dependent DFT (TD-DFT) approaches to explore their potential performances in DSSCs. An additional methoxy group has been proven in enhancing intramolecular charge transfer (ICT) by improving the planarity of Fc2 backbone. This good electronic communication leads to higher HOMO energy level, larger dipole moment and better short-circuit current density (J_sc) values. Eventually, the presence of methoxy group in Fc2 has improved the conversion efficiency as in comparison to Fc1 under the same conditions.

Electronic investigation and spectroscopic analysis using DFT with the long-range dispersion correction on the six lowest conformers of 2.2.3-trimethyl pentane

The conformational stability and internal rotation barriers, HOMO-LUMO gap and related properties, molecular static polarizability and hyperpolarizability parameters, and the NBO delocalization energies associated with the internal charge transfer (ICT) of 2.2.3-trimethylpentane in the ground state were carried out taking into account the long range dispersion correction through CAM-B3LYP and WB97XD levels at aug-cc-pvtz basis set. The six lowest conformations were differentiated by a deep and multiple spectroscopic investigation. The ultraviolet-visible (UV-Vis) absorption bands are assigned using molecular orbital data obtained by TD-WB97XD/aug-cc-pvtz calculations, and carbon ¹³C NMR signal peaks have been assigned using GIAO-WB97XD/aug-cc-pvtz method. In addition, the normal mode calculations of the most and less stable conformers using a scaled force field in terms of non-redundant local symmetry coordinates have been confronted to the experimental vibrational spectra temperature dependency.

Hydrolysis of Amisulbrom in Buffer Solutions and Natural Water Samples: Kinetics and Products Identification

In this study, the hydrolysis of amisulbrom in buffer solutions and natural water samples were investigated. Effects of pH and temperature were tested in buffer solutions. Amisulbrom was stable in acidic and neutral aqueous solutions at 25°C, while quickly hydrolyzed with a half-life of 4.5 days (25°C) at pH 9.0. The kinetics rate equation was determined as k = 1.0234 × 10¹⁰ exp (-61.3760/R·T) (R² = 0.9642) for hydrolysis of amisulbrom at pH 9.0. The pH, ionic strength, and solubility were important factors influencing the hydrolysis of amisulbrom in natural water samples. Furthermore, three hydrolysis products were separated and identified in buffer solution (pH 9.0) and natural water samples. A tentative transformation mechanism of amisulbrom was proposed to rationalize the formation of HPs (hydrolysis products) based on their structural identification, DFT (density functional theory), and hydrolysis profiles. Toxicity prediction using the quantitative structure-activity relationship model revealed that the HP-I, and HP-II were more toxic than the parent amisulbrom. This investigation was the first to evaluate the behavior of amisulbrom hydrolysis in aquatic systems.

Experimental and Theoretical Studies on a Simple S-S-Bridged Dimeric Schiff Base: Selective Chromo-Fluorogenic Chemosensor for Nanomolar Detection of Fe2+ & Al3+ Ions and Its Varied Applications

A simple S-S (disulfide)-bridged dimeric Schiff base probe, L, has been designed, synthesized, and successfully characterized for the specific recognition of Al3+ and Fe2+ ions as fluorometric and colorimetric "turn-on" responses in a dimethylformamide (DMF)-H2O solvent mixture, respectively. The probe L and each metal ion bind through a 1:1 complex stoichiometry, and the plausible sensing mechanism is proposed based on the inhibition of the photoinduced electron transfer process (PET). The reversible chemosensor L showed high sensitivity toward Al3+ and Fe2+ ions, which was analyzed by fluorescence and UV-vis spectroscopy techniques up to nanomolar detection limits, 38.26 × 10-9 and 17.54 × 10-9 M, respectively. These experimental details were advocated by density functional theory (DFT) calculations. The practical utility of the chemosensor L was further demonstrated in electrochemical sensing, in vitro antimicrobial activity, molecular logic gate function, and quantification of the trace amount of Al3+ and Fe2+ ions in real water samples.