Photo-assisted advanced oxidation processes for efficient removal of anionic and cationic dyes using Bentonite/TiO2 nano-photocatalyst immobilized with silver nanoparticles

Optimization of Brilliant Blue R photocatalytic degradation by silver nanoparticles synthesized using Chlorella vulgaris

Synthesis of silver nanoparticles (Ag NPs) using microalgae is gaining recognition for its environmentally friendly and cost-effective nature while maintaining high activity of NPs. In the present study, Ag NPs were synthesized using a methanolic extract of Chlorella vulgaris and subjected to calcination. The X-ray diffraction (XRD) analysis showed a crystalline nature of the products with Ag2O and Ag phases with an average crystalline size of 16.07 nm before calcination and an Ag phase with 24.61 nm crystalline size after calcination. Fourier transform infrared spectroscopy (FTIR) revealed the capping functional groups on Ag NPs, while scanning electron microscopy (SEM) displayed their irregular morphology and agglomeration after calcination. The organic coating was examined by energy-dispersive X-ray spectroscopy (EDX) and thermogravimetric (TGA) analyses, confirming the involvement of the metabolites. The UV-Vis analysis showed a difference in optical properties due to calcination. Synthesized Ag NPs were applied for the photodegradation of hazardous dye Brilliant Blue R in visible light. Different values of light intensity, catalyst dose, initial dye concentration, and pH were tested to identify the optimal set of operating conditions. The highest degradation efficiency of 90.6% with an apparent rate constant of 0.04402 min-1 was achieved after 90 min of irradiation in the highest tested catalyst dosage.

Investigation of the efficacy of Alhagi maurorum plant powder for Janus Green B dye removal from wastewater

The growth of industrial activities, has led to a significant increase in the influx of color pollutants into the environment. Phytoremediation can play a crucial role in enhancing wastewater quality. Accordingly, this study sought to evaluate the effectiveness of Alhagi maurorum plant powder in removing Janus Green B (JGB) dye from aqueous solutions. The adsorbent's properties were characterized through Fourier-transform infrared spectroscopy. The study examined various parameters, including initial dye concentration (20-110 mg/L), adsorbent dosage (0.002-0.02 g), solution pH (2-10), and contact time (5-50 min). The experiments revealed that the maximum dye removal efficiency, 99.51%, was achieved under optimal conditions: pH 7, a contact time of 20 min, an adsorbent dosage of 0.01 g, and an initial dye concentration of 90 mg/L. The adsorption of JGB onto the adsorbent followed the Langmuir isotherm model, with a maximum adsorption capacity of 90.909 mg/g. The kinetic results supported a pseudo-second-order model for the adsorption process, with an R2 value of 0.9999. The calculated Gibbs free energy changes (ΔG°) at temperatures of 288, 298, 308, 318, and 328 K were found to be -5354.28, -5993.61, -6439.66, -7026.51, and -7932.05 kJ/mol, respectively, indicating the spontaneity of the adsorption process.

One-Pot Synthesis of Cellulose-Based Carbon Aerogel Loaded with TiO2 and g-C3N4 and Its Photocatalytic Degradation of Rhodamine B

A cellulose-based carbon aerogel (CTN) loaded with titanium dioxide (TiO2) and graphitic carbon nitride (g-C3N4) was prepared using sol-gel, freeze-drying, and high-temperature carbonization methods. The formation of the sol-gel was carried out through a one-pot method using refining papermaking pulp, tetrabutyl titanate, and urea as raw materials and hectorite as a cross-linking and reinforcing agent. Due to the cross-linking ability of hectorite, the carbonized aerogel maintained a porous structure and had a large specific surface area with low density (0.0209 g/cm3). The analysis of XRD, XPS, and Raman spectra revealed that the titanium dioxide (TiO2) and graphitic carbon nitride (g-C3N4) were uniformly distributed in the CTN, while TEM and SEM observations demonstrated the uniformly distributed three-dimensional porous structure of CTN. The photocatalytic activity of the CTN was determined according to its ability to degrade rhodamine B. The removal rate reached 89% under visible light after 120 min. In addition, the CTN was still stable after five reuse cycles. The proposed catalyst exhibits excellent photocatalytic performance under visible light conditions.

Facile synthesis and physicochemical characterization of κ-Carrageenan-silver-bentonite based nanocatalytic platform for efficient degradation of anionic azo dyes

Water pollution due to textile industry effluents is a global concern that warrants versatile research solutions for degrading them, and for a sustainable environment. In the present work, by using the imperative role of nanotechnology, a facile one-pot synthesis has been devised to generate κ-carrageenan capped silver nanocatalyst (CSNC), and was immobilized on 2D bentonite (BT) sheets to generate nanocatalytic platform (BTCSNC) for the degradation of anionic azo dyes. The nanocomposite(s) were physicochemically characterized using UV-Vis, DLS, TEM, FESEM, PXRD, ATR-FTIR, TGA, BET and XPS etc., to obtain insights into the nanocomposite composition, structure, stability, morphology and mechanism of interaction. The obtained CNSC are monodispersed, spherical with a size of 4 ± 2 nm, and were stabilized by the functional groups (-OH, COO‾, and SO3‾) of κ-Crg. The broadening of peak corresponding to basal plane (001) of BT montmorillonite in PXRD spectra established its exfoliation upon addition of CSNC. XPS and ATR-FTIR data evidenced the absence of covalent interactions between CSNC and BT. The catalytic efficiency of CSNC and BTCSNC composites were compared for the degradation of methyl orange (MO) and congo red (CR). The reaction followed a pseudo first order kinetics, and immobilization of CSNC on BT resulted in a 3-4 fold enhancement in degradation rates. The rates achieved for the degradation kinetics are: MO degradation within 14 s (Ka 9.86 ± 2.00 min-1), and CR degradation within 120 s (Ka of 1.24 ± 0.13 min-1). Further, a degradation mechanism has been proposed by analyzing the products identified through LC-MS. The reusability studies of the BTCSNC evidenced the complete activity of the nanocatalytic platform for six cycles, and gravitational separation method for catalyst recycling. In a nutshell, the current study provided an environmentally friendly, sizable, and sustainable nano catalytic platform" for the remediation of industrial wastewater contaminated with hazardous azo dyes".

Competitive and cooperative adsorption analysis for dye removal from multicomponent system using Prosopis juliflora activated carbon

In this study, performance evaluation of two adsorbents synthesized using invasive weed, i.e., Prosopis juliflora, was chemically activated using hydrochloric acid (HPJ) and sodium hydroxide (NPJ). The synthesized adsorbents HPJ and NPJ were subjected to SEM, EDX, XRD, FTIR, and porosimetry analysis for characterization and applied for adsorptive removal of rhodamine B (RB) and methyl orange (MO) dyes from monocomponent (MO/RB) and multicomponent (MO + RB) systems in batch mode. Meanwhile, the effect of operational parameters such as contact time, HPJ and NPJ dosage, MO/RB concentration, and [Formula: see text] on sorption of MO/RB dyes was investigated. The adsorption data was modeled through various kinetic and equilibrium models. On the other hand, the multi-dye sorption system was modeled using Langmuir competitive isotherm. Furthermore, the effect of presence of one dye on sorption of other and vice versa, i.e., competitive (antagonistic) and cooperative (synergistic) nature of sorption process, was investigated. From the results, it was observed that pseudo-second-order kinetic and Langmuir isotherm models best fit the adsorption kinetic and equilibrium data for sorption of MO and RB dyes using both HPJ and NPJ as adsorbents. Langmuir's maximum sorption ability (qm) of HPJ for sorption of MO and RB dyes was observed to be 12.77 mg/g and 9.95 mg/g, respectively, from the monocomponent system. On the other hand, qm of NPJ for sorption of MO and RB dyes was observed to be 10.51 mg/g and 8.69 mg/g, respectively. Langmuir's sorption ability (qm) was slightly higher in the MO + RB mixture in contrast to MO/RB. As a result, the sorption of MO/RB dyes from the MO + RB system showed synergistic nature. In conclusion, the HPJ and NPJ could be effectively used as sorbents for sorption of dyes from effluents.

A review on pollutants remediation competence of nanocomposites on contaminated water

Clean freshwater has been required for drinking, sanitation, agricultural activities, and industry, as well as for the development and maintenance of the eco - systems on which all livelihoods rely. Water contamination is currently a significant concern for researchers all over the world; hence it is essential that somehow this issue is resolved as soon as possible. It is now recognised as one of the most important research areas in the world. Current wastewater treatment techniques degrade a wide range of wastewaters efficiently; however, such methods have some limitations. Recently, nanotechnology has emerged as a wonderful solution, and researchers are conducting research in this water remediation field with a variety of potential applications. The pollutants remediation capability of nanocomposites as adsorbents, photocatalysts, magnetic separation, and so on for contaminant removal from contaminated water has been examined in this study. This study has spotlighted the most significant nanocomposites invention reported to date for contaminated and effluent remediation, as well as a research gap as well as possible future perspectives.

Phenol red dye removal from wastewater using TiO2-FSM-16 and Ni-FSM-16 photocatalysts

In this study, the performance of Ni-FSM-16 and TiO₂-FSM-16 photocatalysts in phenol red removal was explored. The XRD, FE-SEM, and BET tests were used to characterize the catalysts. All experiments were performed at ambient temperature and under UV (20 W). The parameters including dye concentration (20-80 mg/L), photocatalyst concentration (0-8 g/L), UV exposure duration, and contact time (0-160 min) were optimized using RSM software. BET values of Ni-FSM-16 and TiO₂-FSM-16 were 718.63 m²/g and 844.93 m²/g, respectively. TiO₂-FSM-16 showed better performance in dye removal than Ni-FSM-16. At pH 3, the maximum dye removal by TiO₂-FSM-16/UV and Ni-FSM-16/UV was obtained 87% and 64%, respectively. The positive hole species had the main role in photocatalytic phenol red removal. The reusability study was done for up to 7 cycles, but the catalysts can be reused effectively for up to 3 cycles. The synergistic factor for the TiO₂-FSM-16 and TiO₂-FSM-16/UV processes were calculated to be 1.55 and 2.12, respectively. The dye removal efficiency by TiO₂-carbon and Ni-carbon was slightly lower than those obtained by the FSM-16 ones. The TiO₂-FSM-16 and Ni-FSM-16 catalysts had a suitable surface and acceptable efficiency in phenol red removal.

Chitosan Fibers Loaded with Limonite as a Catalyst for the Decolorization of Methylene Blue via a Persulfate-Based Advanced Oxidation Process

Wastewater generated from industries seriously impacts the environment. Conventional biological and physiochemical treatment methods for wastewater containing organic molecules have some limitations. Therefore, identifying other alternative methods or processes that are more suitable to degrade organic molecules and lower chemical oxygen demand (COD) in wastewater is necessary. Heterogeneous Fenton processes and persulfate (PS) oxidation are advanced oxidation processes (AOPs) that degrade organic pollutants via reactive radical species. Therefore, in this study, limonite powder was incorporated into porous regenerated chitosan fibers and further used as a heterogeneous catalyst to decompose methylene blue (MB) via sulfate radical-based AOPs. Limonite was used as a heterogeneous catalyst in this process to generate the persulfate radicals (SO₄^-·) that initiate the decolorization process. Limonite-chitosan fibers were produced to effectively recover the limonite powder so that the catalyst can be reused repeatedly. The formation of limonite-chitosan fibers viewed under a field emission scanning electron microscope (FESEM) showed that the limonite powder was well distributed in both the surface and cross-section area. The effectiveness of limonite-chitosan fibers as a catalyst under PS activation achieved an MB decolorization of 78% after 14 min. The stability and reusability of chitosan-limonite fibers were evaluated and measured in cycles 1 to 10 under optimal conditions. After 10 cycles of repeated use, the limonite-chitosan fiber maintained its performance up to 86%, revealing that limonite-containing chitosan fibers are a promising reusable catalyst material.

Pd on cyclotriphosphazen-hexa imine decorated boehmite as an efficient catalyst for hydrogenation of nitro arenes under mild reaction condition

Cyclotriphosphazen-hexa imine ligand was prepared through successive reactions of phosphonitrilchloride trimer with 4-hydroxybenzaldehyde and (3-aminopropyl) triethoxy silane. The as-prepared ligand was then covalently grafted on boehmite to furnish an efficient support for the immobilization of Pd nanoparticles and synthesis of a novel heterogeneous catalyst for hydrogenation of nitro arenes. The catalytic tests revealed that the catalyst had excellent catalytic activity for hydrogenation of various nitro arenes with different steric and electronic features under mild reaction condition in aqueous media. Noteworthy, the catalyst was highly selective and in the substrates with ketone or aldehyde functionalities, reduction of nitro group was only observed. The catalyst was also recyclable and only slight loss of activity was detected after each recycling run. Hot filtration test also approved true heterogeneous nature of catalysis.

Photocatalytic Efficiency of Titanium Dioxide for Dyes and Heavy Metals Removal from Wastewater

The hazardous toxicity of dye materials, even in low concentrations, harms ecological systems. It releases a large number of contaminants into the water, resulting as waste water. Dyes prevent the process of photosynthesis by obstructing light passage, lowers the oxygen levels dissolved in the water. Also, a good number of the dyes and heavy metals are carcinogenic and mutagenic to human beings. Heterogeneous photocatalysis is a promising technology for removing organic, inorganic, and microbial pollutants from water and wastewater. It is preferable to other conventional wastewater treatment approaches due to its benefit, such as low cost, environmental friendliness, ability to proceed at ambient temperature and pressure conditions, and to completely degrade pollutants into environmentally safe products with suitable measures. The titanium oxide (TiO2) is one of the most promising material that has gained enormous importance in the field of energy and environmental applications. The unique physicochemical properties of TiO2 make it one of the best candidates among existing photocatalysts. This review provides an overview of strategies employed to augment its catalytic performance as well as the impact of different operational parameters on the removal proficiency of various organic and inorganic pollutants in water and wastewater treatment. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Selective CO2 adsorption and bathochromic shift in a phosphocholine-based lipid and conjugated polymer assembly

We assemble a film of a phosphocholine-based lipid and a crystalline conjugated polymer using hydrophobic interactions between the alkyl tails of the lipid and alkyl side chains of the polymer, and demonstrated its selective gas adsorption properties and the polymer's improved light absorption properties. We show that a strong attractive interaction between the polar lipid heads and CO₂ was responsible for 6 times more CO₂ being adsorbed onto the assembly than N₂, and that with repeated CO₂ adsorption and vacuuming procedures, the assembly structures of the lipid-polymer assembly were irreversibly changed, as demonstrated by in situ grazing-incidence X-ray diffraction during the gas adsorption and desorption. Despite the disruption of the lipid structure caused by adsorbed polar gas molecules on polar head groups, gas adsorption could promote orderly alkyl chain packing by inducing compressive strain, resulting in enhanced electron delocalization of conjugated backbones and bathochromic light absorption. The findings suggest that merging the structures of the crystalline functional polymer and lipid bilayer is a viable option for solar energy-converting systems that use conjugated polymers as a light harvester and the polar heads as CO₂-capturing sites.

Assembly films of a phosphocholine-based lipid and a crystalline conjugated polymer had significant CO₂ selective adsorption and light absorption due to the attractive interaction of CO₂ with exposed polar lipid heads and enhanced morphologies.