Eco-friendly zeolite/alginate microspheres for Ni ions removal from aqueous solution: Kinetic and isotherm study

Development of composite amine functionalized polyester microspheres for efficient CO2 capture

In order to reduce the impact of greenhouse gases on the environment, the development of various new CO2 capture materials has become a hot spot. In this work, a novel composite amine solid adsorbent was prepared by simultaneously using tetraethylenepentamine (TEPA) and 2-[2-(dimethylamino) ethoxy] ethanol (DMAEE) for amine functionalization on the polyester microsphere carrier. The introduction of methyl methacrylate (MMA) with high glass transition temperature into the polyester carrier makes the carrier microspheres have high hardness. At the same time, the carrier also contains active epoxy groups and hydrophobic glycidyl methacrylate (GMA, which can undergo ring-opening reaction with composite amines to achieve high-load and low-energy chemical grafting of amines on the carrier. The composite aminated polyester microspheres were used as an efficient adsorbent for CO2 in simulated flue gas. The results show that the synergistic effect of TEPA-DMAEE composite amine system in the adsorbent is beneficial to the improvement of CO2 capture capacity. When the total amine content in the impregnating solution is 45 wt% and the composite amine ratio is TEPA: DMAEE = 6: 4, the CO2 adsorption capacity can reach the optimal value of 2.45 mmol/ g at 70 °C. In addition, the composite amine microsphere adsorbent has cyclic regeneration performance. Importantly, through kinetic fitting, the Avrami kinetic model fits the CO2 adsorption better than the quasi-first-order and quasi-second-order kinetic models, which proves that physical adsorption and chemical adsorption coexist in the adsorption process. This simple, long-term stable and excellent selective separation performance makes amine-functionalized adsorbents have potential application prospects in CO2 capture.

Application of zeolite based nanocomposites for wastewater remediation: Evaluating newer and environmentally benign approaches

The presence of heavy metal ions and emerging pollutants in water poses a great risk to various biological ecosystems as a result of their high toxicity. Consequently, devising efficient and environmentally friendly methods to decontaminate these waters is of high interest to many researchers around the world. Among the varied water treatment and desalination means, adsorption and photocatalysis have been widely employed. However, the discussion and analysis of the use of zeolite-based composites as adsorbents are somehow minimal. The porous aluminosilicates (zeolites) are excellent candidates in wastewater treatment owing to various mechanisms of pollutants removal that they possess. The purpose of this review is thus to provide a synopsis of the current developments in the fabrication and application of nanocomposites based on zeolite as adsorbents and photocatalysts for the extraction of heavy metals, dyes and emerging pollutants from wastewaters. The review goes on to look into the effect of weight ratio on photocatalyst, photodegradation pathways, and various factors that influence photocatalysis and adsorption.

Wastewater Treatment by Polymeric Microspheres: A Review

This review addresses polymer microspheres used as adsorbent for wastewater treatment. The removal of various pollutants (including dyes, heavy metal ions, and organic pollutants) is a prominent issue, as they can cause severe health problems. Porous microspheres can provide large specific area and active sites for adsorption or photo degradation. Enhancement in performance is achieved by various modifications, such as the introduction of nanoparticles, magnetic particles, and ZIF-8. Some microspheres were synthesized from synthetic polymers such as vinylic polymer and polydopamine (PDA) through a facile fabrication process. Natural polymers (such as cellulose, alginate, and chitosan) that are biodegradable and eco-friendly are also used. The adsorbents used in industrial application require high adsorption capacity, thermal stability, and recyclability. Batch adsorption experiments were conducted to investigate the optimal conditions, influence of related factors, and adsorption capacities. Insights regarding the adsorption mechanisms were given from the kinetic model, isotherm model, and various characterization methods. The recyclability is investigated through regeneration ratio, or their maintenance of their capability through repeated adsorption-desorption cycles. The high potential of polymer microsphere for the removal of pollutants from wastewater is shown through the high adsorption capacities, environmentally friendliness, and high stability.