Purification of soybean oil from diazinon insecticide by iron-based metal organic framework: Effect of geometrical shape and simulation study

Efficient adsorption of flavonoids on amino-functionalized ZIF-8/chitosan aerogels

Covalent organic structures (MOFs), known for their exceptional properties in separation and purification, have garnered significant attention. However, applying MOF-based adsorbents in complex flavonoid separation scenarios remains challenging. In this study, we successfully synthesized adsorbent materials capable of efficiently adsorbing flavonoids using a vacuum freeze-drying method. The materials were derived from a cross-linked chitosan aerogel functionalized with amino-substituted zeolite imidazolium ester skeleton (ZIF-8). The ZIF-8-NH2, synthesized via in situ substitution of 2-aminobenzimidazole within the ZIF-8 framework, exhibits a smaller pore size than mono ligand ZIF-8. Due to its synergistic interaction with chitosan's biocompatibility and porous structure, the aerogel material (ZIF-8-NH2/CS) exhibited outstanding adsorption capacities (183.37 mg/g, 226.34 mg/g, and 187.16 mg/g) in standard solutions (T = 318 K, rpm = 200) of luteolin, quercetin, and rutin, along with high adsorption rates (71.3 ± 2.3 %, 72.4 ± 1.4 %, and 70.7 ± 3.5 %). And showed rapid adsorption in the first 60 min. After 5 cycles, the adsorption capacity of ZIF-8-NH2/CS aerogel remained at 80.5 % of the adsorption capacity of the initial cycle, and therefore, ZIF-8-NH2/CS aerogel has a good potential for reusability. Additionally, the adsorption process adhered to pseudo-first-order and pseudo-second-order kinetic models, alongside Langmuir and Freundlich isothermal adsorption models. This study introduces novel ideas and methods for the extraction and separation of flavonoids. Furthermore, the developed ZIF-8-NH2/CS aerogels with amino functionality hold promise for diverse applications in separating and purifying bioactive substances.

Facile synthesis of Fe-doped ZIF-8 and its adsorption of phosphate from water: Performance and mechanism

To remove phosphate from water, a novel Fe-doped ZIF-8 was synthesized as a superior adsorbent. The Fe-doped ZIF-8 was fully characterized using different characterization techniques and it was found that the as-prepared Fe-doped ZIF-8 (denoted as ZIF-(2Zn:1Fe)) showed a polyhedral morphology with a large specific surface area of 157.64 m2/g and an average pore size of 3.055 nm. Analyses using Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction showed that Fe atoms were successfully incorporated into the ZIF-8 skeleton. Batch experiments demonstrated that the molar ratio of Fe and Zn has effects on phosphate adsorption. The adsorption kinetics conformed to a pseudo-second-order model with a high correlation coefficient (R2 = 0.9983). The adsorption isotherm matched the Langmuir model (R2 = 0.9994) better than the Freundlich model (R2 = 0.7501), suggesting that the adsorption of phosphoric acid by ZIF-(2Zn:1Fe) can be classified as a chemisorption on a homogeneous surface. The adsorption amount was 38.60 mg/g. It was found that acidic environments favored the adsorption reaction and the best adsorption was achieved at an initial pH of 2. Inhibition of adsorption by common anions is NO3-> CO32-> SO42-> Cl-. Characterization results indicate that the main mechanism of adsorption is surface complexation interactions.

Low thermal quenching of metal halide-based metal-organic framework phosphor for light-emitting diodes

Phosphor-converted white light-emitting diodes (PC-WLEDs) have attracted considerable attention in solid-state lighting and display. However, urgent issues of thermal quenching and high cost remain formidable challenges. Herein, a novel metal-organic framework (MOF) phosphor [CdCl2(AD)] was facilely prepared using a mixture of CdCl2 and acridine (AD) under solvothermal conditions. It shows intensive green emission with a long lifetime of 31.88 ns and quantum yield of 65% while maintaining 95% and 84% of its initial emission intensity after remaining immersed in water for 60 days and being heated to 150 °C, respectively. The low thermal quenching of this MOF material is comparable to or can even exceed that of commercial inorganic phosphors. The combination of experiments and theoretical calculations reveals that the alternating arrangement of delocalized AD π-conjugated systems and CdCl2 inorganic chains through strong coordination bonds and π⋯π stacking interactions imparts the MOF phosphor with high thermal stability and optoelectronic performance. The successful fabrication of green and white LED devices by coating [CdCl2(AD)] and/or N630 red phosphor on a 365/460 nm commercial diode chip suggests a promising and potential alternative to commercial phosphors.

Point-of-Use SERS Approach for Efficient Determination and Removal of Phthalic Acid Esters Based on a Metal-Organic Framework-Coated Melamine Sponge

Phthalic acid esters (PAEs) are ubiquitous environmental contaminants, and their real-time monitoring and removal remain challenging. Herein, a point-of-use (POU) device integrating adsorption, surface-enhanced Raman spectroscopy (SERS), and removal strategy was developed and realized ultrafast on-site determination of PAEs and cleanup of them from water. A piece of flexible melamine sponge (MS) was coated with gold nanostars (AuNSs) and metal-organic frameworks (MOFs), thus obtaining SERS activity and adsorption capacity. Based on this multifunctional AuNSs@MOFs/MS composite, clear trends were observed between SERS signal intensity and concentration of di(2-ethylhexyl)phthalate (DEHP) and dibutyl phthalate (DBP). The method detection limits of DEHP and DBP were calculated to be 0.75 × 10-7 and 0.67 × 10-7 M in water, respectively, proving good sensitivity. Furthermore, this POU device exhibited satisfactory adsorption capacity (∼82.3 g/g for DBP and ∼90.0 g/g for DEHP), high adsorption efficiency (equilibrium in 100 s), and good regeneration capability (removal efficiency >70% after 5 cycles). The applicability of this device was verified by its good determination and removal performance in real environmental water matrices. The whole process could be completed within 5 min. This approach provides a new POU alternative for real-time monitoring and removal of PAEs in water.

Defective metal-organic framework derived from the waste plastic bottles for rapid and efficient nitroimidazole antibiotics removal

In order to alleviate the pressure on the ecological environment and human health caused by wastewater of nitroimidazole antibiotics and poly(ethylene terephthalate) (PET) plastic waste, we propose a strategy of using defective MIL-68(Al) (d-MIL-68(Al)) derived from waste PET plastic for dimetridazole (DMZ) capture. The resulting d-MIL-68(Al) exhibits an excellent adsorption capacity of 555.6 mg g-1, which is three times of pristine MIL-68(Al) (181.8 mg g-1), demonstrating that the defective structures in d-MIL-68(Al) play a crucial role in the adsorption process. Remarkably, d-MIL-68(Al) can remove nearly 97% of DMZ in the first 10 s, and the removal efficiency reached 99% after adsorption equilibrium, affording a record kinetic rate constant k2 (2.84 g mg-1 min-1). In short, d-MIL-68(Al) possesses both an ultrafast adsorption rate and outstanding adsorption capacity toward DMZ compared with reported adsorbents. Mechanism analysis reveals that the excellent DMZ adsorption performances can be ascribed to the abundant active sites caused by defective structures, as well as the π-π stacking and hydrogen bonding interactions between MOF and DMZ. Hence, d-MIL-68(Al) derived from waste PET plastic is an efficient porous adsorbent for rapid DMZ removal, which not only possesses great potential for wastewater treatment, but also reduces the harmful PET plastic waste, reflecting the concept of sustainable development.

Selective separation of chlorophyll-a using recyclable hybrids based on Zn-MOF@cellulosic fibers

Chlorophyll-a as pigments, exist in the green organelles for plants that act in photosynthesis. Different studies were considered with demonstration of an effective separation technique of Chlorophyll-a without decomposition; however, the reported methods were disadvantageous with expensiveness and low quantum yield. The current work uniquely represents an investigative method for the separation of Chlorophyll-a from spinach extract using cellulosic hybrids based on ZIF-8 @cellulosic fibers (Zn-zeolitic imidazolate frameworks@cellulosic fibers) as a cost effective and recyclable absorbents. To obtain hybrids, ZIF-8 was in-situ prepared over the cellulosic fibers (bamboo, modal and cotton). The untreated and treated fibers were well characterized via FTIR, SEM, EDX, XRD, in order to approve the successive impregnation of ZIF-8. Whereas, the microscopic images showed that, microcrystalline ZIF-8 rods with length of 1.3-4.4 µm were grown over the cellulosic fibers. The obtained hybrids and the untreated fibers were exploited in the separation of Chlorophyll-a via the adsorption/desorption process. The chlorophyll-adsorption was followed Langmuir isotherm and pseudo-second order model. The Langmuir maximum capacities of Chlorophyll-a onto hybrids were followed the order of ZIF-8@cotton (583.6 mg/g) > ZIF-8@modal (561.3 mg/g) > ZIF-8@bamboo (528.7 mg/g). After incorporation of ZIF-8, the maximum adsorption capacities of cellulosic fibers were enhanced by 1.4-1.9 times. Adsorption of chlorophyll onto the applied hybrids was lowered by 27-28%, after five repetitive washing cycles. The data summarized that; chlorophyll was effectively separated by the synthesized ZIF-8@cellulosic fibers hybrids, whereas, the prepared hybrids showed good reusability for application on wider scaled purposes.

Static adsorption and photocatalytic degradation of amoxicillin using titanium dioxide/hydroxyapatite nanoparticles based on sea scallop shells

The objective of this study is to investigate the efficiency of two processes for the amoxicillin removal through static (batch) adsorption and photocatalytic degradation onto the prepared samples. Three solid materials as photocatalyst and/or adsorbent were synthesized viz. nanotitanium dioxide (NT) prepared by the sol-gel method, scallop shells-based nanohydroxyapatite (NP), and nanotitanium dioxide/nanohydroxyapatite composite (NTP). The physicochemical and morphological properties of the prepared samples were tested by TGA, XRD, DRS, ATR-FTIR, nitrogen adsorption/desorption isotherm, zeta potential, SEM, and TEM. The major operational conditions were optimized for catalyst or adsorbent mass, pH, shaking time, initial amoxicillin (AMX) concentration, power of UV lamp, and temperature. The results illuminated that NTP achieved the highest adsorption capacity (88.46 mg/g) at 20 ℃ and AMX adsorption onto all the solid materials was well applied by Langmuir, Temkin, pseudo-second order, and Elovich models. The maximum desorption percent (98%) was attained by acetone. The degradation percent of AMX reached 85.3 and 99.5% for NT and NTP, respectively, using 0.9 g/L of catalyst dosage through 90 min. AMX photodegradation onto the catalysts' surface was well fitted by Langmuir-Hinshelwood, Arrhenius, and Eyring-Polanyi models with endothermic, physical, and nonspontaneous nature of photocatalysis process. NTP acts as a promising adsorbent and photocatalyst for the antibiotics' removal in wastewater.

Sonocrystallization of a novel ZIF/zeolite composite adsorbent with high chemical stability for removal of the pharmaceutical pollutant azithromycin from contaminated water

Water pollution management, reduction, and elimination are critical challenges of the current era that threaten millions of lives. By spreading the coronavirus in December 2019, the use of antibiotics, such as azithromycin increased. This drug was not metabolized, and entered the surface waters. ZIF-8/Zeolit composite was made by the sonochemical method. Furthermore, the effect of pH, the regeneration of adsorbents, kinetics, isotherms, and thermodynamics were attended. The adsorption capacity of zeolite, ZIF-8, and the composite ZIF-8/Zeolite were 22.37, 235.3, and 131 mg/g, respectively. The adsorbent reaches the equilibrium in 60 min, and at pH = 8. The adsorption process was spontaneous, endothermic associated with increased entropy. The results of the experiment were analyzed using Langmuir isotherms and pseudo-second order kinetic models with a R2 of 0.99, and successfully removing the composite by 85% in 10 cycles. It indicated that the maximum amount of drug could be removed with a small amount of composite.

MOFs-alginate/polyacrylic acid/poly (ethylene imine) heparin-mimicking beads as a novel hemoadsorbent for bilirubin removal in vitro and vivo models

Metal-organic frameworks (MOFs) have a potential application in blood purification, but their microcrystalline nature has hampered their industrial application. Here, novel MOFs-polymer beads based on UiO, sodium alginate, polyacrylic acid, and poly (ethylene imine) were prepared and applied as a whole blood hemoadsorbent for the first time. The amidation among polymers immobilized UiO66-NH₂ into the network of the optimal product (SAP-3), and the NH₂ of UiO66-NH₂ significantly increased the removal rate (70 % within 5 min) of SAP-3 on bilirubin. The adsorption of SAP-3 on bilirubin mainly obeyed the pseudo-second-order kinetic, Langmuir isotherm and Thomas models with a maximum adsorption capacity (q_m) of 63.97 mg·g^-1. Experimental and density functional theory simulation results show that bilirubin was mainly adsorbed by UiO66-NH₂via electrostatic force, hydrogen bonding, and π-π interactions. Notably, the adsorption in vivo show that the total bilirubin removal rate in the whole blood of the rabbit model was up to 42 % after 1 h of adsorption. Given its excellent stability, cytotoxicity, and hemocompatibility, SAP-3 has a great potential in hemoperfusion therapy. This study proposes an effective strategy for settling the powder property of MOFs and could provide experimental and theoretical references for application of MOFs in blood purification.

Utilizing modified cellulose nanoparticles derived from a plant loofah sponge to improve the removal of diazinon insecticide from an aqueous medium

Organophosphate insecticides, such as diazinon, have been well investigated to pose health and environmental risks. In this study, ferric-modified nanocellulose composite (FCN) and nanocellulose particles (CN) based on a natural source as a loofah sponge were synthesized to verify their adsorption potential to eliminate diazinon (DZ) from contaminated water. The as-prepared adsorbents were characterized by performing TGA, XRD, FTIR spectroscopy, SEM, TEM, pHPZC, and BET analyses, in which FCN showed high thermal stability, surface area of 82.65 m2 g-1, surface with mesopores, good crystallinity (61.6%), and particle size of 86.0 nm. The results of adsorption tests demonstrated that the maximum Langmuir adsorption capacity (294.98 mg g-1) was exhibited by FCN at 38 °C, pH 7, 1.0 g L-1 of adsorbent dosage, and 20 h of contact shaking time. The effect of adding KCl solution with high ionic strength (1.0 mol L-1) reduced the DZ removal percent by 52.9%. The experimental adsorption data achieved the best fit with all the applied isotherm models with favorable, physical, and endothermic nature of adsorption consistent with thermodynamic data. Pentanol attained higher desorption efficiency (95%) and was used in five adsorption/desorption cycles in which FCN exhibited only an 8.8% decrease in the removal percent of DZ.

Remediation competence of nanoparticles amalgamated biochar (nanobiochar/nanocomposite) on pollutants: A review

Advanced biochar blended nanoparticles substances, such as nano biochar or nanocomposites, have provided long-term solutions to a wide range of modern-day problems. Biochar blended nano-composites can be created to create better composite materials that combine the benefits of biochar and nanoparticles. Such materials have been typically improved with active functional groups, porous structure, active surface area, catalytic deterioration ability, as well as easy recovery or separation of pollutants. Such biochar-basednanocomposites have good adsorption properties for a variety of pollutants in various form of polluted medium (soil and water contamination). Catalytic nanoparticle encapsulated biochar, can perform concurrently the adsorption (by biochar) as well as catalytic degradation (nanoparticles) functions for pollutants removal from polluted sites. In this review, the advanced and practically feasible techniques involved in the biochar blended nanoparticles-based nanocomposites have been discussed with environmental applications. Furthermore, the mechanisms involved in this composite material in remediation, as well as the advantages and disadvantages of biochar blended nanoparticles-based nanocomposites, were discussed, and future directions for study in this field were suggested.

Synthesis characterization of Zn-based MOF and their application in degradation of water contaminants

Metal-organic frameworks (MOFs) are currently popular porous materials with research and application value in various fields such as medicine and engineering. Aiming at the application of MOFs in photocatalysis, this paper mainly reviews the main synthesis methods of ZnMOFs and the latest research progress of Zn MOF-based photocatalysts to degrade organic pollutants in water, such as organic dyes. This nanomaterial is being used to treat wastewater and has proven to be very efficient because of its exceptionally large surface area and porous nature. The results show that Zn-MOFs are capable of high degradation of the above pollutants and over 90% of degradation was observed in publications. In addition, the reusability percentage was examined and studies showed that the Zn-MOF nanostructure has very good stability and can continue to degrade a high percentage of pollutants after several cycles. This review focuses on Zn-MOFs and their composites. First, the methods of synthesis and characterization of these compounds are given. Finally, the application of these composites in the process of photocatalytic degradation of dye pollutants such as methylene blue, methyl orange, crystal violet, rhodamine B, etc. is explained.

Ultrastable Photoluminescence Enabled by 1D Rare-Earth Metal-Organic Frameworks Based on Double Thiacalix[4]arene-Capped Nodes

Luminescent stability is a vital factor that dictates the application of lanthanide luminescent materials. Designing luminescent lanthanide cluster nodes that form an extended framework with predictable linking patterns may help enhance the structural stability of the lanthanide complexes and hence lead to improved luminescent stability. Herein, we report a series of one-dimensional (1D) rare-earth metal-organic framework compounds, {Ln₄(μ₄-OH)(TC4A)₂(H₂O)₂(CH₃O)(HCOO)₂(HCOOH)}·xCH₃OH (Ln = Sm (1), Eu (2), Tb (3), Dy (4); x = 1-5), based on double thiacalix[4]arene-capped Ln₄(μ₄-OH)(TC4A)₂ nodes. The axially capped Ln₄(μ₄-OH)(TC4A)₂ nodes are connected equatorially by formate bridges to form zigzag 1D-metal-organic framework (MOF) chains, which further assemble into a quasi-two-dimensional (2D) structure via hydrogen bonding. These unique features result in a stable structure and therefore superior luminescent stability. For example, the Tb-based 1D-MOF (3) exhibits intensive green photoluminescence with a quantum yield of 53% and an average decay time of 1.33 × 10⁶ ns. It maintains its integrated emission intensity at 96.5, 94.5, and 89.4% of the original value after being exposed to moisture (soaking in water for 10 days), elevated temperature (150 °C), and UV (15 days of continuous radiation), respectively, demonstrating excellent luminescent stability. We adopt the Tb-based 1D-MOF (3) as the green phosphor and successfully fabricate a prototype white-light-emitting diode (LED) with stable emission under long-term operation. Our synthetic strategy allows control over the linking pattern of lanthanide nodes, providing a predictive route to obtain lanthanide MOFs with improved luminescent stability.

Recent advances in metal-organic frameworks and their composites for the phototherapy of skin wounds

Wound healing is a complex process that greatly affects the normal physiological activities of genes, proteins, signaling pathways, tissues, and organs. Bacterial infection could easily lead to serious tissue damage during wound healing, thus countering wound infections becomes a major challenge for clinicians and nursing professionals. At present, the exploration of highly effective, low toxicity and environment friendly methods for wound healing is attracting considerable interest all over the world. Recently, metal-organic frameworks (MOFs) have presented great potential for treating wound infections due to their unique characteristics of diversified functionality, large specific surface area, and high biocompatibility. These properties endow MOFs/MOF-based composites with an outstanding anti-wound infection effect, which is mainly attributed to the continuously released active components and the exerted catalytic activity with the assistance of phototherapy. In this review, the current progress of MOFs/MOF-based composites for the phototherapy of skin wounds is presented. Firstly, we illustrate the pathophysiological mechanisms, principles of phototherapy and the conventional methods for wound healing. Then, the structures and characteristics of MOFs are systematically summarized. Moreover, the review highlights the recent advances in the application of phototherapy for wound healing (including photodynamic therapy, photothermal therapy, and synergistic therapy) based on various MOFs/MOF-based composites. Finally, the challenges and perspectives are provided for the further development of MOF-based materials for medical application.