Turning ON/OFF the fluorescence of the ESIPT state by changing the hydrogen bond distance and orientation in quinoline–pyrazole derivatives

Regulating intermolecular hydrogen bonding to construct solvation-induced emission shift quinoline derivatives for real-time monitoring of water content in organic solvents

Water constitutes the most prevalent impurity in organic solvents, exerting significant influence on chemical reactions and potentially leading to fires and explosions, even in minute quantities. Thus, the development of convenient, rapid, and cost effective fluorescent probes for real-time monitoring of water content in organic solvents is imperative. Although some fluorescent materials have been synthesized for this purpose, most suffer from laborious preparation processes and poor cycling performance, constraining their practical application. This study investigates the impact of hydrogen bonding on the aggregation-induced emission (AIE) properties of quinoline derivatives, leveraging quinoline as the foundational scaffold and its nitrogen atom as the hydrogen bond acceptor. Research findings elucidate that intermolecular hydrogen bonding of quinoline is the primary determinant of their AIE behaviors. By harnessing the phenomenon of water molecules forming intermolecular hydrogen bonds with quinoline nitrogen atoms, we devised a straightforward and rapid method to fabricate a fluorescent test paper for real-time monitoring of water content in organic solvents. Experimental results demonstrate that even minute changes in water content, down to concentrations as low as 0.5 % by volume in organic solvents, can induce fluorescence changes in the test paper, which also exhibits favorable cycling performance. This study not only explores the influence of hydrogen bonds on the AIE properties of quinoline derivatives but also pioneers the development of a cost-effective, rapid, and recyclable test paper for real-time monitoring of water content fluctuations in organic solvents.

The effect of the number of conjugated C=C bonds on the ESIPT and ICT reactions of SNCN derivatives

The electronic structure of the molecule is significantly influenced by the number of conjugated C=C bonds. In this work, the influence of the conjugated C=C bonds of the SNCN derivatives on the excited state intramolecular proton transfer (ESIPT) and intramolecular charge transfer (ICT) properties are studied by density functional theory (DFT) and time-dependent density functional theory (TDDFT). The calculation level is proved to be reasonable by calculating electronic spectra. The hydrogen bond parameters, infrared vibrational frequency (IR), reduction density gradient (RDG) isosurface, topological analysis and potential energy curves of SNCN derivatives in ground state (S0) and the first excited state (S1) are analyzed. According to theoretical research results, ESIPT reaction has a higher likelihood of occurring in the S1 state. Moreover, the ESIPT reaction becomes more challenging to occur with the number of conjugated C=C bonds rising. Finally, the analyses of the frontier molecular orbitals (FMOs), dipole moment and charge transfer transition confirm that the ICT effect is aided by the increased number of conjugated C=C bonds. This work indicates that the number of conjugated C=C bonds can regulate the ESIPT and ICT processes, which provides guidance for the study of fluorescent groups with similar characteristics.

Screening the Optimal Probe by Expounding the ESIPT Mechanism and Photophysical Properties in Bis-HBX with Multimodal Substitutions

DFT and TD-DFT were used in this article to investigate the effects of different substitutions at multiple sites on the photophysical mechanism of bis-HBX in the gas phase. Four different substitution modes were selected, denoted as A1 (X=Me, Y=S), A2 (X=OMe, Y=S), B1 (X=Me, Y=NH), and C1 (X=Me, Y=O). The geometric parameters proved that the IHBs enhanced after photoexcitation, which was conducive to promote the ESIPT process. Combining the analysis of the PECs, it was revealed that the bis-HBX molecule underwent the ESIPT process, and the ease of the ESIPT process was in the order of A1 > A2> B1 > C1. In particular, the TICT process in A1 and B1 promoted the occurrence of the ESIPT process. In addition, the IC process was identified, particularly in C1. Meanwhile, the calculation of fluorescence lifetime and fluorescence rate further confirmed that A1 was the most effective fluorescent probe molecule. This theoretical research provides an innovative theoretical reference for regulating ESIPT reactions and optimizing fluorescent probe molecules.

Modulating the ESIPT Mechanism and Luminescence Characteristics of Two Reversible Fluorescent Probes by Solvent Polarity: A Novel Perspective

As reversible fluorescent probes, HTP-1 and HTP-2 have favourable applications for the detection of Zn2+ and H2S. Herein, the impact of solvent on the excited-state intramolecular proton transfer (ESIPT) of HTP-1 and HTP-2 was comprehensively investigated. The obtained geometric parameters and infrared (IR) vibrational analysis associated with the intramolecular hydrogen bond (IHB) indicated that the strength of IHB for HTP-1 was weakened in the excited state. Moreover, structural torsion and almost no ICT behaviour indicated that the ESIPT process did not occur in HTP-1. Nevertheless, when the 7-nitro-1,2,3-benzoxadiazole (NBD) group replaced the H atom, the IHB strength of HTP-2 was enhanced after photoexcitation, which inhibited the twisting of tetraphenylethylene, thereby opening the ESIPT channel. Notably, hole-electron analysis and frontier molecular orbitals revealed that the charge decoupling effect was the reason for the fluorescence quenching of HTP-2. Furthermore, the potential energy curves (PECs) revealed that HTP-2 was more inclined to the ESIPT process in polar solvents than in nonpolar solvents. With a decrease in solvent polarity, it was more conducive to the ESIPT process. Our study systematically presents the ESIPT process and different detection mechanisms of the two reversible probe molecules regulated by solvent polarity, providing new insights into the design and development of novel fluorescent probes.

Photophysical Properties of (E)-1-(4-(Diethyla-mino)-2-hydroxybenzylidene)-4,4-dimethylthiosemicarbazide Compound and Its Triple Fluorescence Emission Mechanism: A Theoretical Perspective

In view of the application prospects in biomedicine of (E)-1-(4-(diethyla-mino)-2-hydroxybenzylidene)-4,4-dimethylthiosemicarbazide (DAHTS), the behavior of excited-state dynamics and photophysical properties were studied using the density functional theory/time-dependent density functional theory method. A series of studies indicated that the intramolecular hydrogen-bond (IHB) intensity of DAHTS was enhanced after photoexcitation. This was conducive to promoting the excited-state intramolecular proton-transfer (ESIPT) process. Combining the analysis of the IHB and hole-electron, it revealed that the molecule underwent both the ESIPT process and the twisted charge-transfer (TICT) process. Relying on exploration of the potential energy surface, it was proposed that the different competitive mechanisms between the ESIPT and TICT processes were regulated by solvent polarity. In acetonitrile (ACN) solvent, the ESIPT process occurred first, and the TICT process occurred later. In contrast, in the CYH solvent, the molecule first underwent the TICT process and then the ESIPT process. Furthermore, we raised the possibility that the TICT behavior was the cause of weak fluorescence emission for the DAHTS in CYH and ACN solvents. By the dimer correlation analysis, the corresponding components of triple fluorescence emission were clearly assigned, corresponding to the monomer, dimer, and ESIPT isomer in turn. Our work precisely elucidated the photophysical mechanism of DAHTS and the attribution of the triple fluorescence emission components, which provided valuable guidance for the development and regulation of bioactive fluorescence probes with multiband and multicolor emission characteristics.

Protein-activated and FRET enhanced excited-state intermolecular proton transfer fluorescent probes for high-resolution imaging of cilia and tunneling nanotubes in live cells

Excited-state intermolecular proton transfer (inter-ESPT) fluorescent probes responsive to specific bioactive molecules should be greatly promising for protein sensing, DNA mutation simulating and cellular process regulating. However, the inter-ESPT molecules are recessive ESPT fluorophores, which need the assistance of other molecules with both hydrogen-bond accepting and donating abilities to turn on the tautomeric fluorescence. Valid design strategies to create powerful inter-ESPT fluorescent probes are poorly developed, particularly for proteins as targets. We recently reported a unique supramolecular strategy to trigger the inter-ESPT process based on the probe-protein recognition by H-bonding and to image protein-based subcellular structures in live cells. Herein, we found that our inter-ESPT probes (inter-ESPT-01) bearing a 2-amino-3-cyanopyridine scaffold can anchor proteins and light up the "invisible" ESPT state, so as to image the proteins or the protein-based subcellular organelles. More importantly, the inter-ESPT emission of inter-ESPT-01 can be significantly enhanced by the FRET process between amino and imino tautomers, endowing the inter-ESPT-01 probes with super-bright tautomeric fluorescence. The expressed proteins Ecallantide and MarTX were selected as the models to light up the inter-ESPT fluorescence of the probes and revealed that the inter-ESPT process can be triggered by the specific probe-protein recognition events. In the use of the super-bright inter-ESPT fluorescence, not only the proteins, but also the protein-based cilia and tunneling nanotubes (TNTs) can be specifically visualized in living cancer cells. Furthermore, such recognition-driven strategy allows us to construct a unique inter-ESPT probe to track and image specific endogenous proteins in live cells, highlighting the potential of inter-ESPT fluorogens as novel intelligent biomaterials.

Tuning ESIPT-coupled luminescence by expanding π-conjugation of a proton acceptor moiety in ESIPT-capable zinc(II) complexes with 1-hydroxy-1H-imidazole-based ligands

The emission of ESIPT-fluorophores is known to be sensitive to various external and internal stimuli and can be fine-tuned through substitution in the proton-donating and proton-accepting groups. The incorporation of metal ions in the molecules of ESIPT fluorophores without their deprotonation is an emerging area of research in coordination chemistry which provides chemists with a new factor affecting the ESIPT reaction and ESIPT-coupled luminescence. In this paper we present 1-hydroxy-5-methyl-4-(pyridin-2-yl)-2-(quinolin-2-yl)-1H-imidazole (HLq) as a new ESIPT-capable ligand. Due to the spatial separation of metal binding and ESIPT sites this ligand can coordinate metal ions without being deprotonated. The reactions of ZnHal₂ with HLq afford ESIPT-capable [Zn(HLq)Hal2] (Hal = Cl, Br, I) complexes. In the solid state HLq and [Zn(HLq)Hal2] luminesce in the orange region (λ_max = 600-650 nm). The coordination of HLq by Zn²⁺ ions leads to the increase in the photoluminescence quantum yield due to the chelation-enhanced fluorescence effect. The ESIPT process is barrierless in the S₁ state, leading to the only possible fluorescence channel in the tautomeric form (T), S₁^T → S₀^T. The emission of [Zn(HLq)Hal2] in the solid state is blue-shifted as compared with HLq due to the stabilization of the ground state and destabilization of the excited state. In CH₂Cl₂ solutions, the compounds demonstrate dual emission in the UV (λ_max = 358 nm) and green (λ_max = 530 nm) regions. This dual emission is associated with two radiative deactivation channels in the normal (N) and tautomeric (T) forms, S₁^N → S₀^N and S₁^T → S₀^T, originating from two minima on the excited state potential energy surfaces. High energy barriers for the GSIPT process allow the trapping of molecules in the minimum of the tautomeric form, S₀^T, resulting in the possibility of the S₀^T → S₁^T photoexcitation and extraordinarily small Stokes shifts in the solid state. Finally, the π-system of quinolin-2-yl group facilitates the delocalization of the positive charge in the proton-accepting part of the molecule and promotes the ESIPT reaction.

Theoretical study on the optical properties of an ESIPT-based fluorescent probe for phosgene

A fluorescent probe Pi with the excited-state intramolecular proton transfer (ESIPT) properties was synthesized and used to detect the phosgene in solution and gas phases. However, the detection mechanism of the fluorescent probe needs to be further studied. Herein, the density functional theory (DFT) and time-dependent density functional theory (TD-DFT) methods were adopted to explore the molecular structures and electronic spectra properties of probe and its product Pio after reacting with phosgene. Through analysis for molecular structure parameters and infrared vibrations accompanied with the hydrogen bond of Pi, it is confirmed that the intramolecular hydrogen bond of Pi is enhanced under light excitation, which illustrates the occurrence of ESIPT reaction combined with the scanned potential energy curves. It can be seen from the simulated spectra that Pi shows double fluorescence through ESIPT process, while the fluorescent product Pio exhibits the single fluorescence due to the disappearance of intramolecular hydrogen bond. Through the study on the structure and optical properties of Pi and Pio, it can be helpful to deeply understand the intrinsic mechanism of the detection of phosgene by the Pi molecule probe, which also supplies a reference to the further study about the fluorescence probe.