Nanomagnetic Salamo-based-Pd(0) Complex: an efficient heterogeneous catalyst for Suzuki–Miyaura and Heck cross-coupling reactions in aqueous medium

A novel chemical probe based on the salamo-Co(II) complex for the highly selective fluorescence detection of tyrosine

A new and rare Salamo-Co(II) complex probe L-Co2+ was designed and synthesised. The structure of the [Co3(L)2(μ-OAc)2(MeOH)2]⋅2H2O complex was obtained by X-ray diffraction experiments. Three Co(II) atoms are in a line in the complex, and all Co(II) atoms form a 6-coordinated octahedral configuration. The probe L-Co2+ selectively recognises tyrosine in DMF/H2O (8:2, v/v). Upon addition of tyrosine, the fluorescence intensity of L-Co2+ was enhanced in a short time. The probe showed high selectivity and sensitivity for tyrosine, detection limit is 4.27 × 10-8 M. The recognition mechanism of probe L-Co2+ for Tyr was inferred by FT-IR spectra, UV spectroscopy, ESI mass spectra and DFT calculations. Finally, due to the simplicity and specificity of the identification process, the probe was also subjected to a test paper experiment and a milk assay.

A highly selective and recyclable fluorescent sensor based on a Salamo-Salen-Salamo type ligand for continuous detection of Al3+ and phosphates in drug

In this work, a fluorescence chemical sensor continuous detection Al3+ and phosphates by a Salamo-Salen-Salamo type compound (SL) was employed. The sensor continuously recognized Al3+ and phosphates with good selectivity and fast response time, and a low limit of detection of 0.25 μΜ and 0.96 μM, at the same time accompanied by a naked-eye identification specificity. The detection mechanism of SL towards Al3+ is due to the chelating fluorescence enhancement effect and ICT effect, and continuously towards phosphates is due to the collapse of the SL-Al3+ and coordination interaction between Al3+ and phosphates, by Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, other spectral characterization and DFT calculation as evidence. In addition, the sensor had good recyclability and reusability. The distribution of Al3+ and phosphates in zebrafish cells was effectively monitored by confocal microscopy based on the good biocompatibility and tissue permeability of SL. Furthermore, the feasibility of using sensor SL to detect the content of Al3+ and phosphate ions in certain drugs was quantitatively analyzed through experiments. It was found SL had a good result in practical application.

A rare extra-long flexible salamo-based bisoxime as highly efficient and selective probe for fluorescent identification of CO32- ion and mechanism exploration

A novel extra-long carbon-chain salamo-like fluorescent chemical probe DNS (named as 2,2'-[1,10-(decanedioxy)bis(nitromethyldyne)]dinaphthol) containing ten methylene groups was synthesized based on the 2-hydroxy-1-naphthylaldehyde unit. Research has shown that the fluorescent probe DNS can achieve efficient and selective recognition of CO32- anions, with a detection limit LOD=1.59 × 10-8 M. The binding constant Ka = 3.7 × 104 M-1 and quantification limit is as low as LOQ=4.31 × 10-8 M, respectively. The possible identification mechanism of the fluorescent chemosensor DNS was analyzed and studied through fluorescence titration and nuclear magnetic titration. The results showed that the fluorescence chemical sensor DNS is deprotonated by CO32- anions, enhancing its fluorescence and producing a ICT effect.

MCM-41 supported 2-aminothiophenol/Cu complex as a sustainable nanocatalyst for Suzuki coupling reaction

We have developed an innovative mesoporous nanocatalyst by carefully attaching a 2-aminothiophenol-Cu complex onto functionalized MCM-41. This straightforward synthesis process has yielded a versatile nanocatalyst known for its outstanding efficiency, recyclability, and enhanced stability. The structural integrity of the nanocatalyst was comprehensively analyzed using an array of techniques, including BET (Brunauer-Emmett-Teller) for surface area measurement, ICP (Inductively Coupled Plasma) for metal content determination, EDS (Energy-Dispersive X-ray Spectroscopy) for elemental mapping, XRD (X-ray Diffraction) for crystalline structure elucidation, SEM (Scanning Electron Microscopy), EMA (Elemental Mapping Analysis), TEM (Transmission Electron Microscopy), TGA (Thermogravimetric Analysis), FT-IR (Fourier Transform Infrared Spectroscopy), AFM (Atomic Force Microscopy), and CV (cyclic voltammetry). Subsequently, the catalytic properties of the newly developed MCM-41-CPTEO-2-aminothiophenol-Cu catalyst was evaluated in the synthesis of biphenyls, demonstrating outstanding yields through a Suzuki coupling reaction between phenylboronic acid and aryl halides. Importantly, this reaction was conducted in an environmentally friendly medium. Note the remarkable recyclability of the catalyst, proving its sustainability over six cycles with minimal loss in activity additionally hot filtration test was prepared to examine the stability of this nanocatalyst. This outstanding feature emphasizes the catalyst's potential for long-term, environmentally conscious catalytic applications.

Novel nickel-immobilized-SiO2-TiO2 fine particles in the presence of cetyltrimethylammonium bromide as a catalyst for ultrasound-assisted-Kumada cross-coupling reaction

Kumada cross-coupling reaction is useful for producing biphenyls, where nickel and copper have been widely investigated as catalysts but mainly homogeneous ones. In this study, we investigated ultrasound-assisted-Kumada cross-coupling reaction over the heterogeneous catalysts in which Ni2+, Cu2+, or both was immobilized on aminopropylsilane-functionalized-SiO2-TiO2 prepared in the presence of cetyltrimethylammonium bromide (CTAB). The presence of CTAB effectively prevented the particle growth and therefore SiO2-TiO2 fine particles with high surface area (502 m2 g-1) were formed. The Ni2+-immobilized catalyst showed high catalytic activity for the ultrasound-assisted-Kumada cross-coupling reaction of a wide variety of substrates and was reusable three times. Performing the reaction under ultrasound irradiation was very effective in significantly accelerating the reaction rate compared with the conventional mechanical method. In contrast to Ni2+, Cu2+ was deposited on the support as crystalline Cu(OH)2 and the resulting catalysts with Cu2+ and Ni2+-Cu2+ were less active and less stable under the reaction conditions.

Excellent Pd-Loaded Magnetic Nanocatalyst on Multicarboxyl and Boronic Acid Biligands

An effective palladium nanocatalyst (Fe3O4@SiO2-FPBA-DTPA-Pd) was proposed and prepared, which was immobilized on magnetic silica with ethylenediamine pentaacetic acid and formylphenylboronic acid as biligands. A series of characterizations showed that Fe3O4@SiO2-FPBA-DTPA-Pd was 5-15 nm and contained 1.44 mmol/g Pd2+/Pd0. It was stable below 232.7 °C, and its saturation magnetization value was 21.17 emu/g which was easily recycled by a magnet. Its catalytic ability was evaluated through 7 Suzuki reactions and 15 Heck reactions. Results showed that the yields of 14 reactions catalyzed by Fe3O4@SiO2-FPBA-DTPA-Pd were more than 90%, while were better than those of the other two immobilized Pd catalysts on a single diethyltriamine pentaacetic acid (DTPA) group or boronic acid group. Moreover, Fe3O4@SiO2-FPBA-DTPA-Pd showed good reusability in both Suzuki and Heck reactions. In two model Suzuki and Heck reactions, after seven cycles, its yields were still above 95% without significant loss, which exceeded those of many reported catalysts; therefore, it has great potential in future large-scale industrial production.

Amphiphilic Dendronized Copolymer-Encapsulated Au, Ag and Pd Nanoparticles for Catalysis in the 4-Nitrophenol Reduction and Suzuki-Miyaura Reactions

The branched structures of dendronized polymers can provide good steric stabilization for metal nanoparticle catalysts. In this work, an amphiphilic dendronized copolymer containing hydrophilic branched triethylene glycol moieties and hydrophobic branched ferrocenyl moieties is designed and prepared by one-pot ring-opening metathesis polymerization, and is used as the stabilizer for metal (Au, Ag and Pd) nanoparticles. These metal nanoparticles (Au nanoparticles: 3.5 ± 3.0 nm; Ag nanoparticles: 7.2 ± 4.0 nm; Pd nanoparticles: 2.5 ± 1.0 nm) are found to be highly active in both the 4-nitrophenol reduction and Suzuki-Miyaura reactions. In the 4-nitrophenol reduction, Pd nanoparticles have the highest catalytic ability (TOF: 2060 h-1). In addition, Pd nanoparticles are also an efficient catalyst for Suzuki-Miyaura reactions (TOF: 1980 h-1) and possess good applicability for diverse substrates. The amphiphilic dendronized copolymer will open a new door for the development of efficient metal nanoparticle catalysts.

Facile synthesis of a new covalent organic nanosheet (CON-KEY1) based on polyamide links as an effective heterogeneous catalyst in C-C cross coupling reactions

C-C coupling reactions represent a fundamental synthetic methodology widely employed in academic and industrial settings. Herein, we present a report on developing and synthesizing a heterogeneous catalyst that is environmentally compatible and has recycling capabilities. Furthermore, the utilization of this catalyst for C-C coupling reactions was explored. A novel amide-based CON was prepared via the reaction of a novel [2,2'-bipyridine]-5,5'-diamine (BDA) and 1,3,5-tris(4-carboxyphenyl) (TCB). TCB was activated with carbonyl diimidazole (CDI) and then reacted with BDA to synthesize favorable CON (i.e., CON-KEY1). Finally, the CON synthesized was reacted with palladium chloride ions, and the palladium-containing organocatalytic complex was decorated with the abbreviated Pd/CON-KEY1. This new heterogeneous complex was fully characterized through the required techniques, including FT-IR, EDX, XRD, TEM, SEM, ICP, TGA-DTA, N2 isotherms, and elemental mapping analysis. Computer simulation results include a multi-sheet 2D framework proposed by CON-KEY1. As a result, palladium ions were found to be arranged between the layers and on the CON surface. This heterogeneous complex functioned as a catalyst precursor in both the Suzuki-Miyaura coupling reaction of aryl boronic acids with aryl halides and the Heck reaction of aryl halides with acrylate derivatives or styrene. The desired coupling products with various functional groups were successfully attained with excellent yields of up to 98%. Simple set-up, improved yields, short reaction times, non-toxic solvents, catalyst durability, and high turnover frequency are among the distinct advantages of this synthetic method. Some other outstanding features of this catalytic system include convenient separation of catalysts and products, high yields, almost complete conversion, high selectivity, and good turnover frequency (TOF). The results show that the highest product efficiency in the reaction was achieved in the shortest possible time using Pd/CON-KEY1. Theoretical studies demonstrated the precedence of the palladium complexation with nitrogen atoms of CON-KEY1 rather than oxygen ones. Natural Bond Orbital (NBO) analysis affirmed that the system with Pd-N bonds (Eg = 0.089 eV) is more reactive with high electron conductivity compared to the Pd-O system (Eg = 0.120 eV).

Functionalization of Framboidal Phenylboronic Acid-Containing Nanoparticles via Aqueous Suzuki-Miyaura Coupling Reactions

Polymeric nanoparticles with reactive functional groups are an attractive platform for drug carriers that can be conjugated with drugs through a cleavable covalent linkage. Since the required functional groups vary depending on the drug molecule, there is a need for development of a novel post-modification method to introduce different functional groups to polymeric nanoparticles. We recently reported phenylboronic acid (PBA)-containing nanoparticles (BNP) with a unique framboidal morphology created via one-step aqueous dispersion polymerization. Since BNPs have high surface area due to their framboidal morphology and contain a high density of PBA groups, these particles can be used as nanocarriers for drugs that can bind to PBA groups such as curcumin and a catechol-bearing carbon monoxide donor. To further explore the potential of BNPs, in this article we report a novel strategy to introduce different functional groups to BNPs via the palladium-catalyzed Suzuki-Miyaura cross-coupling reaction between the PBA groups and iodo- and bromo-coupling partners. We developed a new catalytic system that efficiently catalyzes Suzuki-Miyaura reactions in water without the need for an organic solvent, as confirmed by NMR. Using this catalyst system, we show that BNPs can be functionalized with carboxylic acids, aldehyde, and hydrazide groups while keeping their original framboidal morphology as confirmed via IR, alizarin red assay, and TEM. Furthermore, the potential of the functionalized BNP in drug delivery applications was demonstrated by conjugating the hydrogen sulfide (H₂S)-releasing compound anethole dithiolone to carboxylic acid-functionalized BNPs and show their H₂S-releasing capability in cell lysate.

In vitro anticancer and antibacterial performance of biosynthesized Ag and Ce co-doped ZnO NPs

The great potential of zinc oxide nanoparticles (ZnO NPs) for biomedical applications is attributed to their physicochemical properties. In this work, pure and Ag and Ce dual-doped ZnO NPs were synthesized through a facile and green route to examine their cytotoxicity in breast cancer and normal cells. The initial preparation of dual-doped nanoparticles was completed by the usage of taranjabin. The synthesis of Ag and Ce dual-doped ZnO NPs was started with preparing the Ce:Ag ratios of 1:1, 1:2, and 1:4. The cytotoxicity effects of synthesized nanoparticles against breast normal cells (MCF-10A) and breast cancer cells (MDA-MB-231) were examined. The hexagonal structure of synthesized nanoparticles was observed through the results of X-ray diffraction (XRD). Scanning electron microscopy (SEM) images exhibited the spherical shape and smooth surfaces of prepared particles along with the homogeneous distribution of Ag and Ce in ZnO with high-quality lattice fringes without any distortions. According to the cytotoxic results, the effects of Ag/Ce dual-doped ZnO NPs on breast cancer (MDA-MB-231) cells were significantly more than of pure ZnO NPs, while dual-doped and pure nanoparticles remained indifferent towards breast normal (MCF-10A) cells. In addition, we investigated the antimicrobial activity against harmful bacteria.

Synthesis characterization of Zn-based MOF and their application in degradation of water contaminants

Metal-organic frameworks (MOFs) are currently popular porous materials with research and application value in various fields such as medicine and engineering. Aiming at the application of MOFs in photocatalysis, this paper mainly reviews the main synthesis methods of ZnMOFs and the latest research progress of Zn MOF-based photocatalysts to degrade organic pollutants in water, such as organic dyes. This nanomaterial is being used to treat wastewater and has proven to be very efficient because of its exceptionally large surface area and porous nature. The results show that Zn-MOFs are capable of high degradation of the above pollutants and over 90% of degradation was observed in publications. In addition, the reusability percentage was examined and studies showed that the Zn-MOF nanostructure has very good stability and can continue to degrade a high percentage of pollutants after several cycles. This review focuses on Zn-MOFs and their composites. First, the methods of synthesis and characterization of these compounds are given. Finally, the application of these composites in the process of photocatalytic degradation of dye pollutants such as methylene blue, methyl orange, crystal violet, rhodamine B, etc. is explained.

Aqueous Suzuki couplings mediated by a hydrophobic catalyst

The catalytic activity of [(Ph₂P-o-C₆H₄)₂N]PdCl in aerobic aqueous Suzuki couplings is described. Though hydrophobic, this molecular catalyst is competent in cross-coupling reactions of arylboronic acids with a variety of electronically activated, unactivated, and deactivated aryl iodides, bromides, and chlorides upon heating in aqueous solutions under aerobic conditions to give biphenyl derivatives without the necessity of amphiphiles even in the presence of an excess amount of mercury.

An intelligent DNA nanorobot for detection of MiRNAs cancer biomarkers using molecular programming to fabricate a logic-responsive hybrid nanostructure

Herein, we designed a DNA framework-based intelligent nanorobot using toehold-mediated strand displacement reaction-based molecular programming and logic gate operation for the selective and synchronous detection of miR21 and miR125b, which are known as significant cancer biomarkers. Moreover, to investigate the applicability of our design, DNA nanorobots were implemented as capping agents onto the pores of MSNs. These agents can develop a logic-responsive hybrid nanostructure capable of specific drug release in the presence of both targets. The prosperous synthesis steps were verified by FTIR, XRD, BET, UV-visible, FESEM-EDX mapping, and HRTEM analyses. Finally, the proper release of the drug in the presence of both target microRNAs was studied. This Hybrid DNA Nanostructure was designed with the possibility to respond to any target oligonucleotides with 22 nucleotides length.

Biosynthesis of silver nanoparticles using Lawsonia inermis and their biomedical application

Developing biosynthesis of silver nanoparticles (Ag‐NPs) using plant extract is an environmentally friendly method to reduce the use of harmful chemical substances. The green synthesis of Ag‐NPs by Lawsonia inermis extract and its cellular toxicity and the antimicrobial effect was studied. The physical and chemical properties of synthesised Ag‐NPs were investigated using UV‐visible spectroscopy, infrared spectroscopy, X‐ray diffraction (XRD), scanning, and transmission electron microscopy. The average size of Ag‐NPs was 40 nm. The XRD result shows peaks at 2θ = 38.07°, 44.26°, 64.43°, and 77.35° are related to the FCC structure of Ag‐NPs. Cytotoxicity of synthesised nanoparticles was evaluated by MTT toxicity test on breast cancer MCF7 cell line. Observations showed that the effect of cytotoxicity of nanoparticles on the studied cell line depended on concentration and time. The obtained IC₅₀ was considered for cells at a dose of 250 μg/ml. Growth and survival rates decreased exponentially with the dose. Antimicrobial properties of Ag‐NPs synthesised with extract were investigated against Escherichia coli, Salmonella typhimurium, Bacillus cereus, and Staphylococcus aureus to calculate the minimum inhibitory concentration and the minimum bactericidal concentration of (MBC). The results showed that the synthesised Ag‐NPs and the plant extract have antimicrobial properties. The lowest concentration of Ag‐NPs that can inhibit the growth of bacterial strains was 25 μg/ml.

Plant-mediated synthesis of silver-doped zinc oxide nanoparticles and evaluation of their antimicrobial activity against bacteria cause tooth decay

In this research, silver-doped zinc oxide (SdZnO) nanoparticles (NPs) were synthesized in an environmental-friendly manner. The synthesized NPs were identified by UV-vis spectroscopy, X-ray diffraction (XRD), and scanning electron microscopy (SEM). Finally, the antimicrobial activity of synthesized ZnO and SdZnO NPs was performed. It was observed that by doping silver, the size of ZnO NPs was changed. By adding silver to ZnO NPs, the antimicrobial effect of ZnO NPs was improved. Antibacterial test against gram-positive bacterium Streptococcus mutants showed that SdZnO NPs with a low density of silver had higher antibacterial activity than ZnO NPs; Therefore, SdZnO NPs can be used as a new antibacterial agent in medical applications.

Facile synthesis of Cu NPs@Fe3O4-lignosulfonate: Study of catalytic and antibacterial/antioxidant activities

Environmental pollution is one of the important concerns for human health. There are different types of pollutants and techniques to eliminate them from the environment. We hereby report an efficient method for the remediation of environmental contaminants through the catalytic reduction of the selected pollutants. A green method has been developed for the immobilization of copper nanoparticles on magnetic lignosulfonate (Cu NPs@Fe₃O₄-LS) using the aqueous extract of Filago arvensis L. as a non-toxic reducing and stabilizing agent. The characterization of the prepared Cu NPs@Fe₃O₄-LS was achieved by vibrating sample magnetometer (VSM), Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), high resolution TEM (HRTEM), X-ray diffraction (XRD), scanning TEM (STEM), thermogravimetry-differential thermal analysis (TG/DTA), fast Fourier transform (FFT), energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron (XPS) analyses. The synthesized Cu NPs@Fe₃O₄-LS was applied as a magnetic and green catalyst in the reduction of Congo Red (CR), 4-nitrophenol (4-NP), and methylene blue (MB). The progress of the reduction reactions was monitored by UV-Vis spectroscopy. Finally, the biological properties of the Cu NPs@Fe₃O₄-LS were investigated. The prepared catalyst demonstrated excellent catalytic efficiency in the reduction of CR, 4-NP, and MB in the presence of sodium borohydride (NaBH₄) as the reducing agent. The appropriate magnetism of Cu NPs@Fe₃O₄-LS made its recovery very simple. The advantages of this process include a simple reaction set-up, high and catalytic antibacterial/antioxidant activities, short reaction time, environmentally friendliness, high stability, and easy separation of the catalyst. In addition, the prepared Cu NPs@Fe₃O₄-LS could be reused for four cycles with no significant decline in performance.