Sol–gel derived ZnO/PVP nanocomposite thin film for superoxide radical sensor

Aerosol-based functional nanocomposite coating process for large surface areas

The incorporation of nanometric-sized objects in conventional coatings can improve the properties of the matrix alone or give rise to new functionalities brought by the nanostructures. Current processes call on various shaping technologies that depend on the nature of the nano-inclusions and the matrix considered. Here, we present an integrated process based on the incorporation of nanoparticles using the aerosol route. It combines divergent nanoparticle jets with a uniform spatial profile and Physical Vapor Deposition (PVD). The chemical nature of the nanoparticles is then independent of that used for the matrix. First samples show that the morphology of nanocomposites is strongly dependent on the particle density in the films. Moreover, using several aerodynamic lens arrays combined with smart masking demonstrate the ability for coating on large surface area (40 cm²) substrates. These extended possibilities for developing new types of nanocomposites on any type of substrate and on large surface areas at low temperatures proves to be of strategic interest for various applications.

Synthesis, Optical, and Morphological Studies of ZnO Powders and Thin Films Fabricated by Wet Chemical Methods

Zinc oxide nanoparticles were prepared from Zn₅(CO₃)₂(OH)₆ precursor, capped with poly(vinylpyrrolidone) (PVP), and annealed at 600 °C. The obtained powders were characterized by a powder X-ray diffraction (PXD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), UV–visible spectroscopy (UV–vis), Raman spectroscopy, infrared spectroscopy (IR), thermal analysis (TGA/DTA), and third-order nonlinear (NL) optical measurement. Morphological evaluation by TEM and SEM measurements indicated that the precursor micro-particles are ball-shaped structures composed of plates with a thickness of approximately 10 nm. ZnO thin films, as well as ZnO/polymer multilayer layouts, were obtained by wet chemical methods (spin- and dip-coating). Surface topography and morphology of the obtained films were studied by SEM and AFM microscopy. Films with uniformly distributed ZnO plates, due to the erosion of primary micro-particles were formed. The fabricated specimens were also analyzed using a spectroscopic ellipsometry in order to calculate dielectric function and film thickness.

Solution-processed MoO3:PEDOT:PSS hybrid hole transporting layer for inverted polymer solar cells

Solution-processed organic-inorganic hybrids composing of MoO3 nanoparticles and PEDOT:PSS were developed for use in inverted organic solar cells as hole transporting layer (HTL). The hybrid MoO3:PEDOT:PSS inks were prepared by simply mixing PEDOT:PSS aqueous and MoO3 ethanol suspension together. A core-shell structure was proposed in the MoO3:PEDOT:PSS hybrid ink, where PEDOT chains act as the core and MoO3 nanoparticles connected with PSS chains act as the composite shell. The mixing with PEDOT:PSS suppressed the aggregation of MoO3 nanoparticles, which led to a smoother surface. In addition, since the hydrophilic PSS chains were passivated through preferentially connection with MoO3, the stronger adhesion between MoO3 nanoparticles and the photoactive layer improved the film forming ability of the MoO3:PEDOT:PSS hybrid ink. The MoO3:PEDOT:PSS hybrid HTL can therefore be feasibly deposited onto the hydrophobic photoactive polymer layer without any surface treatment. The use of the MoO3:PEDOT:PSS hybrid HTL resulted in the optimized P3HT:PC61BM- and PTB7:PC61BM-based inverted organic solar cells reaching highest power conversion efficiencies of 3.29% and 5.92%, respectively, which were comparable with that of the control devices using thermally evaporated MoO3 HTL (3.05% and 6.01%, respectively). Furthermore, less HTL thickness dependence of device performance was found for the hybrid HTL-based devices, which makes it more compatible with roll-to-roll printing process. In the end, influence of the blend ratio of MoO3 to PEDOT:PSS on photovoltaic performance and device stability was studied carefully, results indicated that the device performance would decrease with the increase of MoO3 blended ratio, whereas the long-term stability was improved.