Graphite/poly (vinyl alcohol) hydrogel composite as porous ringy skirt for artificial cornea

Properties of the acellular porcine cornea crosslinked with UVA/riboflavin as scaffolds for Boston Keratoprosthesis

The Boston Keratoprosthesis type I (B-KPro) is widely used in the world, but the lack of donor corneas limits its application. This study aims to prepare the acellular porcine cornea (APC) crosslinked with ultraviolet A (UVA)/riboflavin instead of donor corneas as the scaffold for B-KPro. Decellularization of freeze-thaw combined with biological enzymes resulted in approximately 5 ng/mg DNA residue, the a-Gal removal rate of 99%, and glycosaminoglycans retention at a high level of 46.66 ± 2.59 mg/mg. UVA/ riboflavin cross-linking was adopted to induce the formation of new chemical bonds between adjacent collagen chains in the corneal stroma to improve the mechanical properties and resistance to enzymatic hydrolysis. Through comprehensive analysis of the biomechanics, enzyme degradation, immunogenicity and histological structure of the APC crosslinked at different times, CL3 (irradiation conditions, 365 nm, 3 mW/cm, 80 min, both sides) was selected and transplanted into the rabbit cornea model through interlamellar keratoplasty and penetrating keratoplasty as the scaffold of the B-KPro. Compared with the native porcine cornea (NPC) and APC, the experiment of interlamellar pocket indicated that the structure of CL3 was homogeneous without degradation and vascularization in vivo at 12 weeks after surgery. Simultaneously, the results of transplantation of B-KPro showed complete epithelialization of CL3 within 1 week, and neovascularization of the cornea indicated rejection but could be controlled with immunosuppressants. At 3 months postoperatively, the lens of B-KPro remained transparent, and the structure of CL3 was compact and uniform, accompanied by the migration and proliferation of a large number of stromal cells without degradation, suggesting the CL3 could be a promising corneal substitute.

Synthesis and characterization of novel bio-nanocomposite of polyvinyl alcohol-Arabic gum-magnesium oxide via direct blending method

Due to the significance growth in application of polymer-based nanocomposites, different methods of synthesis and different reinforces have been studied in recent years for specific purposes. In this study, using the direct blending process, polyvinyl alcohol-arabic gum-magnesium oxide nanocomposites were synthesized. These synthesized nanocomposites were investigated using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), X-ray energy diffraction (EDS) spectroscopy, X-ray surface elemental mapping (X-Ray Map), transmission electron microscopy (TEM), ultraviolet -visible (UV-vis) spectrophotometry and thermal gravimetery analysis (TGA). The results revealed that size distributions of magnesium oxide nanoparticles and synthesized nanocomposites were between 25-40 nm and 20-90 nm, respectively. Elemental map results show the magnesium oxide nanoparticles were well distributed on polymer matrix walls.

Fabrication and Characterization of Poly (vinyl alcohol) and Chitosan Oligosaccharide-Based Blend Films

In the present study, we report the development of poly (vinyl alcohol) (PVA) and chitosan oligosaccharide (COS)-based novel blend films. The concentration of COS was varied between 2.5-10.0 wt% within the films. The inclusion of COS added a brown hue to the films. FTIR spectroscopy revealed that the extent of intermolecular hydrogen bonding was most prominent in the film that contained 5.0 wt% of COS. The diffractograms showed that COS altered the degree of crystallinity of the films in a composition-dependent manner. As evident from the thermal analysis, COS content profoundly impacted the evaporation of water molecules from the composite films. Stress relaxation studies demonstrated that the blend films exhibited more mechanical stability as compared to the control film. The impedance profiles indicated the capacitive-dominant behavior of the prepared films. Ciprofloxacin HCl-loaded films showed excellent antimicrobial activity against Escherichia coli and Bacillus cereus. The prepared films were observed to be biocompatible. Hence, the prepared PVA/COS-based blend films may be explored for drug delivery applications.

Biomaterials of PVA and PVP in medical and pharmaceutical applications: Perspectives and challenges

Poly(vinyl alcohol) (PVA) has attracted considerable research interest and is recognized among the largest volume of synthetic polymers that have been produced worldwide for almost one century. This is due to its exceptional properties which dictated its extensive use in a wide variety of applications, especially in medical and pharmaceutical fields. However, studies revealed that PVA-based biomaterials present some limitations that can restrict their use or performances. To overcome these limitations, various methods have been reported, among which blending with poly(vinylpyrrolidone) (PVP) showed promising results. Thus, our aim was to offer a systematic overview on the current state concerning the preparation, properties and various applications of biomaterials based on synergistic effect of mixtures between PVA and PVP. Future trends towards where the biomaterials research is headed were discussed, showing the promising opportunities that PVA and PVP can offer.

Morphology-Controllable Collagen/Poly(2-hydroxyethyl methacrylate) Porous Hydrogel with a Paraffin Microsphere as a Template

In this study, a porous poly(2-hydroxyethyl methacrylate) (PHEMA) matrix was fabricated by a paraffin template method, which was used as a substrate to adhere collagen fibers to form an interconnective porous collagen/PHEMA (Col-PHEMA) composite hydrogel. A microscope and scanning electron microscope (SEM) were employed to characterize the morphology of paraffin microspheres and Col-PHEMA composite hydrogels. The paraffin microspheres with the diameter in the range from 100 to 200 μm were collected by a preset sieve. Then, the interface of uniform paraffin microspheres were thermally bonded to form a contacted template, and the derived Col-PHEMA composite hydrogels had an interconnective porous microstructure. Fourier transform infrared spectroscopy (FTIR) indicated that new hydrogen bonds were formed between collagen fibers and the PHEMA hydrogel. Besides, the Col-PHEMA composite hydrogels revealed a high hydrophilicity, good mechanical properties, and good water uptake capacity. The porous Col-PHEMA composite hydrogels showed a good biocompatibility, and the collagen layer may promote the proliferation of fibroblast cells. The Col-PHEMA composite hydrogel is expected to find an application in corneal repairing.

Fabrication of conductive gelatin methacrylate-polyaniline hydrogels

Hydrogels with inherently conductive properties have been recently developed for tissue engineering applications, to serve as bioactive scaffolds to electrically stimulate cells and modulate their function. In this work, we have used interfacial polymerization of aniline monomers within gelatin methacrylate (GelMA) to develop a conductive hybrid composite. We demonstrate that as compared to pure GelMA, GelMA-polyaniline (GelMA-Pani) composite has similar swelling properties and compressive modulus, comparable cell adhesion and spreading responses, and superior electrical properties. Additionally, we demonstrate that GelMA-Pani composite can be printed in complex user-defined geometries using digital projection stereolithography, and will be useful in developing next-generation bioelectrical interfaces.

STATEMENT OF SIGNIFICANCE

We report the fabrication of a conductive hydrogel using naturally-derived gelatin methyacrylate (GelMA) and inherently conductive polyaniline (Pani). This work is significant, as GelMA-Pani composite has superior electrical properties as compared to pure Gelma, all the while maintaining biomimetic physical and biocompatible properties. Moreover, the ability to fabricate conductive-GelMA in complex user-defined micro-geometries, address the significant processing challenges associated with all inherently conductive polymers including Pani. The methodology described in this work can be extended to several conductive polymers and hydrogels, to develop new biocompatible electrically active interfaces.

Strategies for regeneration of components of nervous system: scaffolds, cells and biomolecules

Nerve diseases including acute injury such as peripheral nerve injury (PNI), spinal cord injury (SCI) and traumatic brain injury (TBI), and chronic disease like neurodegeneration disease can cause various function disorders of nervous system, such as those relating to memory and voluntary movement. These nerve diseases produce great burden for individual families and the society, for which a lot of efforts have been made. Axonal pathways represent a unidirectional and aligned architecture allowing systematic axonal development within the tissue. Following a traumatic injury, the intricate architecture suffers disruption leading to inhibition of growth and loss of guidance. Due to limited capacity of the body to regenerate axonal pathways, it is desirable to have biomimetic approach that has the capacity to graft a bridge across the lesion while providing optimal mechanical and biochemical cues for tissue regeneration. And for central nervous system injury, one more extra precondition is compulsory: creating a less inhibitory surrounding for axonal growth. Electrospinning is a cost-effective and straightforward technique to fabricate extracellular matrix (ECM)-like nanofibrous structures, with various fibrous forms such as random fibers, aligned fibers, 3D fibrous scaffold and core-shell fibers from a variety of polymers. The diversity and versatility of electrospinning technique, together with functionalizing cues such as neurotrophins, ECM-based proteins and conductive polymers, have gained considerable success for the nerve tissue applications. We are convinced that in the future the stem cell therapy with the support of functionalized electrospun nerve scaffolds could be a promising therapy to cure nerve diseases.

Fabrication of conductive polyaniline hydrogel using porogen leaching and projection microstereolithography

A PEGda–PANI conductive hydrogel developed using interfacial polymerization process can be applied to range of fabrication methodologies.

Preparation of PVA hydrogel with high-transparence and investigations of its transparent mechanism

The PVA hydrogel with high-transparence has been prepared, the 1DMSO/2H₂O network structure and the transparent mechanism were also explored.

Property-based design: optimization and characterization of polyvinyl alcohol (PVA) hydrogel and PVA-matrix composite for artificial cornea

Each approach for artificial cornea design is toward the same goal: to develop a material that best mimics the important properties of natural cornea. Accordingly, the selection and optimization of corneal substitute should be based on their physicochemical properties. In this study, three types of polyvinyl alcohol (PVA) hydrogels with different polymerization degree (PVA1799, PVA2499 and PVA2699) were prepared by freeze-thawing techniques. After characterization in terms of transparency, water content, water contact angle, mechanical property, root-mean-square roughness and protein adsorption behavior, the optimized PVA2499 hydrogel with similar properties of natural cornea was selected as a matrix material for artificial cornea. Based on this, a biomimetic artificial cornea was fabricated with core-and-skirt structure: a transparent PVA hydrogel core, surrounding by a ringed PVA-matrix composite skirt that composed of graphite, Fe-doped nano hydroxyapatite (n-Fe-HA) and PVA hydrogel. Different ratio of graphite/n-Fe-HA can tune the skirt color from dark brown to light brown, which well simulates the iris color of Oriental eyes. Moreover, morphologic and mechanical examination showed that an integrated core-and-skirt artificial cornea was formed from an interpenetrating polymer network, no phase separation appeared on the interface between the core and the skirt.

Effect of chemical composition on corneal cellular response to photopolymerized materials comprising 2-hydroxyethyl methacrylate and acrylic acid

Characterization of corneal cellular response to hydrogel materials is an important issue in ophthalmic applications. In this study, we aimed to investigate the relationship between the feed composition of 2-hydroxyethyl methacrylate (HEMA)/acrylic acid (AAc) and material compatibility towards corneal stromal and endothelial cells. The monomer solutions of HEMA and AAc were mixed at varying volume ratios of 92:0, 87:5, 82:10, 77:15, and 72:20, and were subjected to UV irradiation. Results of electrokinetic measurements showed that an increase in absolute zeta potential of photopolymerized membranes is observed with increasing the volume ratios of AAc/HEMA. Following 4 days of incubation with various hydrogels, the primary rabbit corneal stromal and endothelial cell cultures were examined for viability, proliferation, and pro-inflammatory gene expression. The samples prepared from the solution mixture containing 0-10 vol.% AAc displayed good cytocompatibility. However, with increasing volume ratio of AAc and HEMA from 15:77 to 20:72, the decreased viability, inhibited proliferation, and stimulated inflammation were noted in both cell types, probably due to the stronger charge-charge interactions. On the other hand, the ionic pump function of corneal endothelial cells exposed to photopolymerized membranes was examined by analyzing the Na(+),K(+)-ATPase alpha 1 subunit (ATP1A1) expression level. The presence of material samples having higher anionic charge density (i.e., zeta potential of -38 to -56 mV) may lead to abnormal transmembrane transport. It is concluded that the chemical composition of HEMA/AAc has an important influence on the corneal stromal and endothelial cell responses to polymeric biomaterials.

Biofunctionalisation of polymeric scaffolds for neural tissue engineering

Patients who experience injury to the central or peripheral nervous systems invariably suffer from a range of dysfunctions due to the limited ability for repair and reconstruction of damaged neural tissue. Whilst some treatment strategies can provide symptomatic improvement of motor and cognitive function, they fail to repair the injured circuits and rarely offer long-term disease modification. To this end, the biological molecules, used in combination with neural tissue engineering scaffolds, may provide feasible means to repair damaged neural pathways. This review will focus on three promising classes of neural tissue engineering scaffolds, namely hydrogels, electrospun nanofibres and self-assembling peptides. Additionally, the importance and methods for presenting biologically relevant molecules such as, neurotrophins, extracellular matrix proteins and protein-derived sequences that promote neuronal survival, proliferation and neurite outgrowth into the lesion will be discussed.