Mercury(II) selective membrane electrode based on 1,3-bis(2-methoxybenzene)triazene

A new electrochemical sensor based on task-specific ionic liquids-modified palm shell activated carbon for the determination of mercury in water samples

In this study, a potentiometric sensor composed of palm shell activated carbon modified with trioctylmethylammonium thiosalicylate (TOMATS) was used for the potentiometric determination of mercury ions in water samples. The proposed potentiometric sensor has good operating characteristics towards Hg (II), including a relatively high selectivity; a Nernstian response to Hg (II) ions in a concentration range of 1.0 × 10(-9) to 1.0 × 10(-2) M, with a detection limit of 1 × 10(-10) M and a slope of 44.08 ± 1.0 mV/decade; and a fast response time (~5 s). No significant changes in electrode potential were observed when the pH was varied over the range of 3-9. Additionally, the proposed electrode was characterized by good selectivity towards Hg (II) and no significant interferences from other cationic or anionic species.

Flow injection analysis of mercury using 4-(dimethylamino) benzaldehyde-4-ethylthiosemicarbazone as the ionophore of a coated wire electrode

A flow injection analysis (FIA) incorporating a thiosemicarbazone-based coated wire electrode (CWE) was developed method for the determination of mercury(II). A 0.1 M KNO(3) carrier stream with pH between 1 and 5 and flow rate of 1 mL·min(-1) were used as optimum parameters. A linear plot within the concentration range of 5 × 10(-6)–0.1 M Hg(II), slope of 27.8 ± 1 mV per decade and correlation coefficient (R2) of 0.984 were obtained. The system was successfully applied for the determination of mercury(II) in dental amalgam solutions and spiked environmental water samples. Highly reproducible measurements with relative standard deviation (RSD < 1% (n = 3)) were obtained, giving a typical throughput of 30 samples·h(-1).

Electrochemical Analysis of Some Toxic Metals by Ion-Selective Electrodes

An overview of potentiometric sensors that are capable of detecting toxic heavy metal ions in environmental samples is presented and discussed. Notwithstanding the tremendous work performed so far, it is obvious that still several limitations do exist in terms of selectivity, limits of detection, dynamic ranges, applicability to specific problems, and reversibility. A survey on important advances in potentiometric sensors with regard to high selectivity, lower detection limit, fast response time, and on-line environmental analysis is presented in this review article. [Supplemental materials are available for this article. Go to the publisher's online edition of Critical Reviews in Analytical Chemistry to view the free supplemental file.].

Multi-walled carbon nanotubes-ionic liquid-carbon paste electrode as a super selectivity sensor: application to potentiometric monitoring of mercury ion(II)

In this article a super selectivity potentiometric methodology, using an ion-selective electrode, for determination of mercury ion(II) in aqueous solution was investigated. For modification of the electrode a room temperature ionic liquid, 1-n-butyl-3-methylimidazolium tetrafluoroborate (BMIM·BF(4)), was applied as a super conductive binder, and Multi-walled carbon nanotubes (MWCNTs) was used in the composition of the carbon paste to improve conductivity and transduction of chemical signal to electrical signal. Moreover, incorporation of 1-(2-ethoxyphenyl)-3-(3-nitrophenyl)triazene (ENTZ) as an ionophore to this composition caused to significantly enhanced selectivity toward Hg(II) ions over a wide concentration range of 1.0×10(-4) to 5.0×10(-9) M with a lower detection limit of 2.5×10(-9) M (0.5 ppb) and a Nernstian slope of 29.3±(0.2) mV decade(-1) of Hg(II) activity. The electrode has a short response time (∼5s) and can be used for at least 55 days without any considerable divergence in potentials, and the working pH range was 2.0-4.3. Finally, the proposed electrode was successfully used as an indicator for potentiometric determination of Hg(II) in dental amalgam and water samples.