Effect of Ta2O5/TiO2 thin film on mechanical properties, corrosion and cell behavior of the NiTi alloy implanted with tantalum

Fabrication of a Novel Ta(Zn)O Thin Film on Titanium by Magnetron Sputtering and Plasma Electrolytic Oxidation for Cell Biocompatibilities and Antibacterial Applications

Pure titanium (Ti) and titanium alloys are widely used as artificial implant materials for biomedical applications. The excellent biocompatibility of Ti has been attributed to the presence of a natural or artificial surface layer of titanium dioxide. Zinc oxide and tantalum oxide thin films are recognized due to their outstanding antibacterial properties. In this study, high power impulse magnetron sputtering (HiPIMS) was used for the deposition of tantalum oxide and zinc-doped Ta(Zn)O thin films on Ti with rough and porous surface, which was pretreated by plasma electrolytic oxidation (PEO). Surface morphology, antibacterial property as well as cell biocompatibility were analyzed. The antibacterial effect was studied individually for the Gram-positive and Gram-negative bacteria Staphylococcus aureus (S. aureus) and Actinobacillus actinomycetemcomitans (A. actinomycetemcomitans). The deposited Ta (Zn)O coating was composed of amorphous tantalum oxide and crystalline ZnO. The antibacterial results on the tantalum oxide and Ta(Zn)O coated Ti indicated a significant inhibition of both S. aureus and A. actinomycetemcomitans bacteria when compared with the uncoated Ti samples. The deposited Ta(Zn)O showed the best antibacterial performance. The Ta(Zn)O coated Ti showed lower level of the cell viability in MG-63 cells compared to other groups, indicating that Zn-doped Ta(Zn)O coatings may restrict the cell viability of hard tissue-derived MG-63 cells. However, the biocompatibility tests demonstrated that the tantalum oxide and Ta(Zn)O coatings improved cell attachment and cell growth in human skin fibroblasts. The cytotoxicity was found similar between the Ta2O5 and Ta(Zn)O coated Ti. By adopting a first PEO surface modification and a subsequent HiPIMS coating deposition, we synthetized amorphous tantalum oxide and Ta(Zn)O coatings that improved titanium surface properties and morphologies, making them a good surface treatment for titanium-based implants.

Surface Modification of Biomedical Titanium Alloy: Micromorphology, Microstructure Evolution and Biomedical Applications

With the increasing demand for bone implant therapy, titanium alloy has been widely used in the biomedical field. However, various potential applications of titanium alloy implants are easily hampered by their biological inertia. In fact, the interaction of the implant with tissue is critical to the success of the implant. Thus, the implant surface is modified before implantation frequently, which can not only improve the mechanical properties of the implant, but also polish up bioactivity and osseoconductivity on a cellular level. This paper aims at reviewing titanium surface modification techniques for biomedical applications. Additionally, several other significant aspects are described in detail in this article, for example, micromorphology, microstructure evolution that determines mechanical properties, as well as a number of issues concerning about practical application of biomedical implants.

In vitro corrosion properties and cytocompatibility of Fe-Ga alloys as potential biodegradable metallic materials

The in vitro biodegradable properties and cytocompatibility of Fe-Ga alloys including Fe₈₁Ga₁₉, (Fe₈₁Ga₁₉)₉₈B₂ and (Fe₈₁Ga₁₉)_99.5(TaC)_0.5, and pure Fe were investigated for biomedical applications. The microstructure of the alloys was characterized using X-ray diffraction spectroscopy and optical microscopy. The results showed that A2 and D0₃ phases were detected for the three types of Fe-Ga alloys, and additional Fe₂B and TaC phases were found in the (Fe₈₁Ga₁₉)₉₈B₂ and (Fe₈₁Ga₁₉)_99.5(TaC)_0.5 alloys, respectively. The corrosion rates of the Fe-Ga alloys were higher than that of pure Fe, as demonstrated by both potentiodynamic polarization measurements and immersion tests in simulated body fluid. The alloying element Ga lowered the corrosion potential of the Fe matrix and made it more susceptible to corrosion. Severe pitting corrosion developed on the surface of the Fe₈₁Ga₁₉ alloy after the addition of ternary B or TaC due to the multi-phase microstructures. The MC3T3-E1 cells exhibited good adhesion and proliferation behavior on the surfaces of the Fe-Ga alloys after culture for 4h and 24h.

In vitro and in vivo corrosion and histocompatibility of pure Mg and a Mg-6Zn alloy as urinary implants in rat model

Pure Mg and a Mg-6wt.% Zn alloy were investigated as potential candidates for biodegradable implants for the urinary system. The in vitro corrosion behavior was studied by potentiodynamic polarization and immersion tests in simulated body fluid (SBF) at 37°C. The in vivo degradation and histocompatibility were examined through implantation into the bladders of Wistar rats. The alloying element Zn elevated the passivation potential and increased the cathodic current density. Both in vitro and in vivo degradation tests showed a faster corrosion rate for the Mg-6Zn alloy. Tissues stained with hematoxylin and eosin (HE) suggested that both pure Mg and Mg-6Zn alloy exhibited good histocompatibility in the bladder indwelling implantation and no differences between pure Mg and Mg-6Zn groups were found in bladder, liver and kidney tissues during the 2weeks implantation. Overall, this work presented instructive information on the degradation properties and histocompatibility of pure Mg and the Mg-6Zn alloy in the urinary system.

Enhanced osteointegration on tantalum-implanted polyetheretherketone surface with bone-like elastic modulus

Polyetheretherketone (PEEK) possesses a similar elastic modulus as bones but yet suffers from bio-inertness and poor osteogenesis. In this work, tantalum ions are implanted energetically into PEEK by plasma immersion ion implantation (PIII) to form Ta2O5 nanoparticles in the near surface. Nanoindentation reveals that the surface elastic modulus of the Ta ion implanted PEEK is closer to that of human cortical bones. In vitro cell adhesion, alkaline phosphatase activity, collagen secretion, extracellular matrix mineralization, and real-time PCR analyses disclose enhanced adhesion, proliferation, and osteogenic differentiation of rat bone mesenchymal stem cells (bMSCs) on the Ta-PIII modified PEEK. In vivo evaluation of the cortico-cancellous rat femur model by means of micro-CT, sequential fluorescent labeling, and histological analysis after 8 weeks confirms significantly improved osteointegration. The bone-like elastic modulus and modified surface topography of the Ta-PIII modified PEEK synergistically induce osteogenic differentiation of bMSCs and the surface-modified materials have large potential in dental and orthopedic implants.

Superelasticity, corrosion resistance and biocompatibility of the Ti-19Zr-10Nb-1Fe alloy

Microstructure, mechanical properties, superelasticity and biocompatibility of a Ti-19Zr-10Nb-1Fe alloy are investigated. X-ray diffraction spectroscopy and transmission electron microscopy observations show that the as-cast Ti-19Zr-10Nb-1Fe alloy is composed of α' and β phases, but only the β phase exists in the as-rolled and as-quenched alloys. The tensile stress-strain tests indicate that the as-quenched alloy exhibits a good combination of mechanical properties with a large elongation of 25%, a low Young's modulus of 59 GPa and a high ultimate tensile stress of 723 MPa. Superelastic recovery behavior is found in the as-quenched alloy during tensile tests, and the corresponding maximum of superelastic strain is 4.7% at the pre-strain of 6%. A superelastic recovery of 4% with high stability is achieved after 10 cyclic loading-unloading training processes. Potentiodynamic polarization and ion release measurements indicate that the as-quenched alloy shows a lower corrosion rate in Hank's solution and a much less ion release rate in 0.9% NaCl solution than those of the NiTi alloys. Cell culture results indicate that the osteoblasts' adhesion and proliferation are similar on both the Ti-19Zr-10Nb-1Fe and NiTi alloys. A better hemocompatibility is confirmed for the as-quenched Ti-19Zr-10Nb-1Fe alloy, attributed to more stable platelet adhesion and small activation degree, and a much lower hemolysis rate compared with the NiTi alloy.

The physicochemical/biological properties of porous tantalum and the potential surface modification techniques to improve its clinical application in dental implantology

More rapid restoration and more rigid functionality have been pursued for decades in the field of dental implantology. Under such motivation, porous tantalum has been recently introduced to design a novel type of dental implant. Porous tantalum bears interconnected porous structure with pore size ranging from 300 to 600μm and a porosity of 75-85%. Its elastic modulus (1.3-10GPa) more closely approximates that of natural cortical (12-18GPa) and cancellous bone (0.1-0.5GPa) in comparison with the most commonly used dental materials, such as titanium and titanium alloy (106-115GPa). Porous tantalum is highly corrosion-resistant and biocompatible. It can significantly enhance the proliferation and differentiation of primary osteoblasts derived from elderly people than titanium. Porous tantalum can allow bone ingrowth and establish not only osseointegration but also osseoincorporation, which will significantly enhance the secondary stability of implants in bone tissue. In this review, we summarize the physicochemical, mechanical and biological properties of porous tantalum. We further discuss the performance of current tantalum dental implants and present the methodologies of surface modifications in order to improve their biological performance.

Nano-hardness, wear resistance and pseudoelasticity of hafnium implanted NiTi shape memory alloy

NiTi shape memory alloy was modified by Hf ion implantation to improve its wear resistance and surface integrity against deformation. The Auger electron spectroscopy and x-ray photoelectron spectroscopy results indicated that the oxide thickness of NiTi alloy was increased by the formation of TiO₂/HfO₂ nanofilm on the surface. The nano-hardness measured by nano-indentation was decreased even at the depth larger than the maximum reach of the implanted Hf ion. The lower coefficient of friction with much longer fretting time indicated the remarkable improvement of wear resistance of Hf implanted NiTi, especially for the sample with a moderate incident dose. The formation of TiO₂/HfO₂ nanofilm with larger thickness and decrease of the nano-hardness played important roles in the improvement of wear resistance. Moreover, Hf implanted NiTi exhibited larger pseudoelastic recovery strain and retained better surface integrity even after being strained to 10% as demonstrated by in situ scanning electron microscope observation.