Manipulation of chemical composition and architecture of non-biodegradable poly(ethylene terephthalate)/chitosan fibrous scaffolds and their effects on L929 cell behavior

Microstructured Polymeric Fabrics Modulating the Paracrine Activity of Adipose-Derived Stem Cells

The deposition of stem cells at sites of injury is a clinically relevant approach to facilitate tissue repair and angiogenesis. However, insufficient cell engraftment and survival require the engineering of novel scaffolds. Here, a regular network of microscopic poly(lactic-co-glycolic acid) (PLGA) filaments was investigated as a promising biodegradable scaffold for human Adipose-Derived Stem Cell (hADSC) tissue integration. Via soft lithography, three different microstructured fabrics were realized where 5 × 5 and 5 × 3 μm PLGA 'warp' and 'weft' filaments crossed perpendicularly with pitch distances of 5, 10 and 20 μm. After hADSC seeding, cell viability, actin cytoskeleton, spatial organization and the secretome were characterized and compared to conventional substrates, including collagen layers. On the PLGA fabric, hADSC re-assembled to form spheroidal-like structures, preserving cell viability and favoring a nonlinear actin organization. Moreover, the secretion of specific factors involved in angiogenesis, the remodeling of the extracellular matrix and stem cell homing was favored on the PLGA fabric as compared to that which occurred on conventional substrates. The paracrine activity of hADSC was microstructure-dependent, with 5 μm PLGA fabric enhancing the expression of factors involved in all three processes. Although more studies are needed, the proposed PLGA fabric would represent a promising alternative to conventional collagen substrates for stem cell implantation and angiogenesis induction.

Plasma-Initiated Grafting of Bioactive Peptide onto Nano-CuO/Tencel Membrane

A bioactive peptide has been successfully grafted onto nano-CuO impregnated Tencel membranes by a simple and rapid method involving a series of textile processes, and an atmospheric argon plasma treatment that requires no additional solvent or emulsifier. Surface morphology shows an apparent change from smooth, slightly roughened, and stripped with increasing plasma treatment time. The FT-IR characteristic peaks confirm the presence of the CuO nanoparticle and peptide on the extremely hydrophilic Tencel membranes that exhibit a zero-degree contact angle. Prepared nano-CuO/Tencel membranes with 90 s plasma treatment time exhibit excellent antimicrobial activity against E. coli and S. aureus, and promote fibroblast cell viability with the assistance of a grafted bioactive peptide layer on the membrane surface.

Piezoelectric Electrospun Fibrous Scaffolds for Bone, Articular Cartilage and Osteochondral Tissue Engineering

Osteochondral tissue (OCT) related diseases, particularly osteoarthritis, number among the most prevalent in the adult population worldwide. However, no satisfactory clinical treatments have been developed to date to resolve this unmet medical issue. Osteochondral tissue engineering (OCTE) strategies involving the fabrication of OCT-mimicking scaffold structures capable of replacing damaged tissue and promoting its regeneration are currently under development. While the piezoelectric properties of the OCT have been extensively reported in different studies, they keep being neglected in the design of novel OCT scaffolds, which focus primarily on the tissue's structural and mechanical properties. Given the promising potential of piezoelectric electrospun scaffolds capable of both recapitulating the piezoelectric nature of the tissue's fibrous ECM and of providing a platform for electrical and mechanical stimulation to promote the regeneration of damaged OCT, the present review aims to examine the current state of the art of these electroactive smart scaffolds in OCTE strategies. A summary of the piezoelectric properties of the different regions of the OCT and an overview of the main piezoelectric biomaterials applied in OCTE applications are presented. Some recent examples of piezoelectric electrospun scaffolds developed for potentially replacing damaged OCT as well as for the bone or articular cartilage segments of this interfacial tissue are summarized. Finally, the current challenges and future perspectives concerning the use of piezoelectric electrospun scaffolds in OCT regeneration are discussed.

Nanomaterials for application in wound Healing: current state-of-the-art and future perspectives

Nanoparticles are the gateway to the new era in drug delivery of biocompatible agents. Several products have emerged from nanomaterials in quest of developing practical wound healing dressings that are nonantigenic, antishear stress, and gas-exchange permeable. Numerous studies have isolated and characterised various wound healing nanomaterials and nanoproducts. The electrospinning of natural and synthetic materials produces fine products that can be mixed with other wound healing medications and herbs. Various produced nanomaterials are highly influential in wound healing experimental models and can be used commercially as well. This article reviewed the current state-of-the-art and briefly specified the future concerns regarding the different systems of nanomaterials in wound healing (i.e., inorganic nanomaterials, organic and hybrid nanomaterials, and nanofibers). This review may be a comprehensive guidance to help health care professionals identify the proper wound healing materials to avoid the usual wound complications.

Small-diameter polyurethane vascular graft with high strength and excellent compliance

In this study, a polyurethane vascular graft with excellent strength and compliance for clinical application was designed and fabricated by preparing three small-diameter vascular graft layers via the textile techniques of wet spinning and knitting. The polyurethane filament that was fabricated by wet spinning formed the inner layer. The polyurethane tubular fabric was used as the middle layer. The outer layer was prepared by spraying polyurethane solution. The three layers of the polyurethane vascular graft have uniform wall thickness, high strength, excellent compliance, and good puncture resistance compared with clinical poly(ethylene terephthalate) (PET) and expanded polytetrafluoroethylene (ePTFE) vascular graft. Therefore, these layers can have potential clinical applications in the replacement of the conventional artificial vascular graft prepared from PET and ePTFE.

Formulation and Evaluation of a Clove Oil-Encapsulated Nanofiber Formulation for Effective Wound-Healing

Wound-healing is complicated process that is affected by many factors, especially bacterial infiltration at the site and not only the need for the regeneration of damaged tissues but also the requirement for antibacterial, anti-inflammatory, and analgesic activity at the injured site. The objective of the present study was to develop and evaluate the natural essential oil-containing nanofiber (NF) mat with enhanced antibacterial activity, regenerative, non-cytotoxic, and wound-healing potential. Clove essential oil (CEO) encapsulated in chitosan and poly-ethylene oxide (PEO) polymers to form NFs and their morphology was analyzed using scanning electron microscopy (SEM) that confirmed the finest NFs prepared with a diameter of 154 ± 35 nm. The successful incorporation of CEO was characterized by Fourier transform infra-red spectroscopy (FTIR) and X-ray diffractometry (XRD). The 87.6 ± 13.1% encapsulation efficiency and 8.9 ± 0.98% loading of CEO was observed. A total of 79% release of CEO was observed in acidic pH 5.5 with 117% high degree of swelling. The prepared NF mat showed good antibacterial activity against Staphylococcus aureus and Escherichia coli and non-cytotoxic behavior against human fibroblast cell lines and showed good wound-healing potential.

Polyvinyl alcohol-based electrospun matrix as a delivery system for nanoemulsion containing chalcone against Leishmania (Leishmania) amazonensis

Cutaneous leishmaniasis is a worldwide public health problem. Conventional therapies, in addition to the high cost, have many adverse effects and cases of parasite's resistance. Chalcones are secondary metabolites precursors in the flavonoid pathway and can be obtained naturally, but with low yield from plant raw material. Thus, the use of synthetic chalcones has been a promising strategy for the development of molecules with leishmanicidal activity. Thus, this work aimed to develop a controlled release system of two synthetic chalcone (trans-chalcones and 3'-(trifluormethyl)-chalcone) using polyvinyl alcohol nanofibers (PVA) as scaffold. The association of chalcones to the nanofibers was made by nanoemulsions (NE) thereof, i.e., a colloidal system on a nanometric scale, which allows compounds with opposite polarities to remain miscible and stable throughout their manipulation. Chalcone nanoemulsions were developed using the spontaneous emulsification technique. The NE were characterized regarding their particle size, polydispersion index (PDI), and zeta potential. The results showed NE with spherical shape, absolute values of zeta potential were higher than 30 mV and homogeneous distribution pattern (PDI < 0.3). Dynamics light scattering (DLS) analysis showed similar hydrodynamic rays, i.e., 180 nm (trans-chalcone NE) and 178 nm (NE containing 3'-(trifluormethyl)-chalcone, in addition to presenting encapsulation efficiency values close to 100 %. Subsequently, the NE were added to a polymeric solution of polyvinyl alcohol (PVA) and processed via the electrospinning technique affording a PVA matrix (15 %, w/v) nanofiber containing the chalcones NE at 1 mg.mL^-1. In a follow-up experiment, the skin permeation assay of the PVA matrix-chalcone NE was performed in vitro using Franz type diffusion cells and porcine ear as biological model of study. The results showed that the treatments with the nanofibers containing the chalcone NE were retained mainly in the stratum corneum, while the NE suspensions containing chalcone were retained in the epidermis and dermis. This result is thought to be relevant, since parasites are located mainly in the dermis. Further, in vitro assay against the amastigote form of L. (L) amazonensis, showed IC₅₀ values to trans-chalcone and 3'-(trifluormethyl)-chalcone of 24.42 ± 6.76 μg.mL^-1 and 15.36 ± 4.61 μg.mL^-1, respectively. In addition to improving the solubility of the compounds tested in culture medium without using organic solvents, chalcones in nano-emulsified form reduced the IC₅₀ to 9.09 ± 1.24 μg.mL^-1 (trans-chalcone) and 10.27 ± 2.27 μg.mL^-1 (3'-(trifluormethyl)-chalcone) which confirmed the potential of the nanoemulsion containing chalcone for cutaneous leishmaniasis treatment.

Heparin-hyaluronic acid nanofibers for growth factor sequestration in spinal cord repair

Growth factor (GF) delivery is a common strategy for spinal cord injury repair, however, GF degradation can impede long-term therapies. GF sequestration via heparin is known to protect bioactivity after delivery. We tested two heparin modifications, methacrylated heparin and thiolated heparin, and electrospun these with methacrylated hyaluronic acid (MeHA) to form HepMAHA and HepSHHA nanofibers. For loaded conditions, MeHA, HepMAHA, and HepSHHA fibers were incubated with soluble basic fibroblast growth factor (bFGF) or nerve growth factor (NGF) and rinsed with PBS. Control groups were hydrated in PBS. L929 fibroblast proliferation was analyzed after 24 hr of culture in either growth media or bFGF-supplemented media. Dissociated chick dorsal root ganglia neurites were measured after 3 days of cell culture in serum free media (SFM) or NGF-supplemented SFM (SFM + NGF). In growth media, fibroblast proliferation was significantly increased in loaded HepMAHA (α < .05) compared to other groups. In SFM, loaded HepMAHA had the longest average neurite length compared to all other groups. In SFM + NGF, HepMAHA and HepSHHA had increased neurite lengths compared to MeHA, regardless of loading (α < .01), suggesting active sequestration of soluble NGF. HepMAHA is a promising biomaterial for sequestering released GFs in a spinal cord injury environment and will be combined with GF filled microspheres for future studies.

Fabrication and evaluation of modified poly(ethylene terephthalate) microfibrous scaffolds for hepatocyte growth and functionality maintenance

For hepatocyte culture in vitro, the surface feature of utilized scaffolds exerts a direct impact on cell adhesion, growth and differentiated functionality. Herein, to regulate hepatocyte growth and differentiated functionality, modified microfibrous scaffolds were fabricated by surface grafting monoamine terminated lactobionic lactone (L-NH₂) and gelatin onto non-woven poly(ethylene terephthalate) (PET) fibrous substrate (PET-Gal and PET-Gel), respectively. The physicochemical properties of PET scaffolds before and after modification were characterized. Upon 15-day culture, the effects of modified PET scaffolds on growth and differentiated functionality of human induced hepatocytes (hiHeps) were evaluated, compared with that of control without modification. Results demonstrated that both L-NH₂ and gelatin modifications improved scaffold properties including hydrophilicity, water uptake ratio, stiffness and roughness, resulting in efficient cell adhesion, ~20-fold cell expansion and enhanced differentiated functionality. After culture for 15 days, PET-Gal cultured cells formed aggregates, displaying better cell viability and significantly higher differentiated functionality regarding albumin secretion, urea synthesis, phases I (cytochrome P450, CYP1A1/2 and CYP3A4) and II (uridine 5'-diphosphate glucuronosyltransferases, UGT) enzyme activity, biliary excretion and detoxification ability (ammonia elimination and bilirubin conjugation), compared with PET and PET-Gel cultured ones. Hence, as a three-dimensional (3D) microfibrous scaffold, PET-Gal promotes hiHeps growth and differentiated functionality maintenance, which is promisingly utilized in bioartificial liver (BAL) bioreactors.

Hierarchical Porous Protein Scaffold Templated from High Internal Phase Emulsion Costabilized by Gelatin and Gelatin Nanoparticles

Recently, three-dimensional (3D) scaffolds produced using poly-Pickering high internal phase emulsions (polyHIPEs) technology are particularly attractive in biomedical application. However, until now the most investigated polyHIPEs are hydrophobic composites originating from synthetic polymers. Here we present an investigation of a hierarchical porous protein scaffold templated from oil-in-water (O/W) HIPEs costabilized by fully natural materials, gelatin, and gelatin nanoparticles. Fairly monodispersed gelatin nanoparticles were first synthesized through a two-step desolvation method, and then they were used as emulsifiers together with gelatin to fabricate stable HIPEs with adjustable droplet size distribution and rheology. Monolithic scaffolds were formed by cross-linking the HIPEs with polymers as low as 2.5 wt % in the continuous phase, which appropriately presented a general high porosity and had an interconnected porous morphology with smooth pore walls and textured structures. Furthermore, the scaffolds were degradable and showed reasonably good biocompatibility; L929 cells could adhere to the surface of the materials and exhibited intensive growth and well-spread morphology. This hierarchical porous protein scaffold could, therefore, have important application as a 3D scaffold that offers enhanced cell adhesion and functionality.

Foreign body reaction associated with PET and PET/chitosan electrospun nanofibrous abdominal meshes

Electrospun materials have been widely explored for biomedical applications because of their advantageous characteristics, i.e., tridimensional nanofibrous structure with high surface-to-volume ratio, high porosity, and pore interconnectivity. Furthermore, considering the similarities between the nanofiber networks and the extracellular matrix (ECM), as well as the accepted role of changes in ECM for hernia repair, electrospun polymer fiber assemblies have emerged as potential materials for incisional hernia repair. In this work, we describe the application of electrospun non-absorbable mats based on poly(ethylene terephthalate) (PET) in the repair of abdominal defects, comparing the performance of these meshes with that of a commercial polypropylene mesh and a multifilament PET mesh. PET and PET/chitosan electrospun meshes revealed good performance during incisional hernia surgery, post-operative period, and no evidence of intestinal adhesion was found. The electrospun meshes were flexible with high suture retention, showing tensile strengths of 3 MPa and breaking strains of 8-33%. Nevertheless, a significant foreign body reaction (FBR) was observed in animals treated with the nanofibrous materials. Animals implanted with PET and PET/chitosan electrospun meshes (fiber diameter of 0.71 ± 0.28 µm and 3.01 ± 0.72 µm, respectively) showed, respectively, foreign body granuloma formation, averaging 4.2-fold and 7.4-fold greater than the control commercial mesh group (Marlex). Many foreign body giant cells (FBGC) involving nanofiber pieces were also found in the PET and PET/chitosan groups (11.9 and 19.3 times more FBGC than control, respectively). In contrast, no important FBR was observed for PET microfibers (fiber diameter = 18.9 ± 0.21 µm). Therefore, we suggest that the reduced dimension and the high surface-to-volume ratio of the electrospun fibers caused the FBR reaction, pointing out the need for further studies to elucidate the mechanisms underlying interactions between cells/tissues and nanofibrous materials in order to gain a better understanding of the implantation risks associated with nanostructured biomaterials.

Effects of genipin cross-linking of chitosan hydrogels on cellular adhesion and viability

PURPOSE

The aim of the present study was to investigate the effects of genipin (Gp) cross-linking of chitosan (CHI) hydrogels on the cell adhesion and viability.

METHOD

Series of Gp crosslinked CHI hydrogels were prepared by incubation of solutions containing a mixture of Gp and CHI in different ratios. The resulting hydrogels were characterized by scanning electron microscopy (SEM), parallel plate rheometer, contact angle and swelling ratio measurement. The in vitro cytocompatibility of hydrogels was evaluated with L929 fibroblasts by MTT method. The cell adhesion morphology on gel surface was characterized by SEM, and the cell viability was assessed through cell count and flow cytometry analysis.

RESULTS

It was found that macroporous structure of the CHI hydrogels could be tailored by varying Gp or CHI amount. Gp cross-linking of hydrogels enhanced their storage modulus significantly, and also altered their hydrophilicity and swell properties. The MTT results revealed that the cross-linked hydrogels did not induce cytotoxic effects. Cell count and flow cytometry analysis demonstrated that denser surface milieu of hydrogels could facilitate better cell adhesion and viability.

CONCLUSIONS

It could be concluded that increased cross-linking density significantly improved the cell adhesion and viability on hydrogel surface. This research provides prospective biocompatible approaches by making gel stiffness modifications to hydrogel scaffolds for the purpose of different tissue engineering.

In vitro and in vivo cytocompatibility of electrospun nanofiber scaffolds for tissue engineering applications

An electrospun polymeric-based nanofibrous scaffold mimicking the extracellular matrix and serving as a temporary support for cell growth, adhesion, migration and proliferation.