Influences of magnetized hydroxyapatite on the growth behaviors of osteoblasts and the mechanism from molecular dynamics simulation

First-Principles Computational Study of the Modification Mechanism of Graphene/Graphene Oxide on Hydroxyapatite

Due to its unique crystal structure and nano-properties, hydroxyapatite (HA) has become an important inorganic material with broad development prospects in electrical materials, for fire resistance and insulation, and in bone repair. However, its application is limited to some extent because of its low strength, brittleness and other shortcomings. Graphene (G) and its derivative graphene oxide (GO) are well known for their excellent mechanical properties, and are widely used to modify HA by domestic and foreign scholars, who expect to achieve better reinforcement and toughening effects. However, the enhancement mechanism has not been made clear. Accordingly, in this study, G and GO were selected to modify HA using the first-principles calculation method to explore the theory of interfacial bonding of composites and explain the microscopic mechanism of interfacial bonding. First-principles calculation is a powerful tool used to solve experimental and theoretical problems and predict the structure and properties of new materials with precise control at the atomic level. Therefore, the bonding behaviors of hydroxyapatite (100), (110) and (111) crystal planes with G or GO were comprehensively and systematically studied using first-principles calculation; this included analyses of the density of states and differential charge density, and calculations of interfacial adhesion work and elastic moduli. Compared to HA (100) and (111) crystal planes, HA (110) had the best bonding performance with G and with GO, as revealed by the calculation results. The composite material systems of HA (110)/G and HA (110)/GO had the smallest density of states at the Fermi level, the largest charge transfers of Ca atoms, the largest interfacial adhesion work and the most outstanding elastic moduli. These results provide a theoretical basis for the modification of HA to a certain extent, and are beneficial to the expansion of the scope of its application.

Experimental and theoretical investigations of the influences of one-dimensional hydroxyapatite nanostructures on cytocompatibility

Due to their simple crystal structures, one-dimensional hydroxyapatite (HA) nanostructures are easily to be applied to understand the fundamental concepts about the influences of HA dimensionality on physical, chemical, and biological properties. So, in this work, three typical HA one-dimensional nanostructures, HA nanotubes, HA nanowires, and HA nanospheres, were prepared, whose theoretical structures were built also. in vitro cytocompatibility test proved that, contrasting with TCPS, HA one-dimensional nanostructures had certain degree of cytotoxicity because HA nanostructures increase the generation of intracellular reactive oxygen species (ROS) and intracellular calcium. Theoretical simulation indicated that HA nanosphere has higher intracellular ROS generation and lower ROS storage amount than HA nanowire and HA nanotube, which were the possible reasons for its stronger cytotoxicity. Among these typical one-dimensional nanostructures, owing to higher drug storage amount and sustained delivery ability, HA nanotube was more potential application in orthopedics. The tubular structure of HA nanotubes could be used as reservoirs for small molecule drugs or growth factors. The cytocompatibility of HA nanostructures can be improved obviously when they were produced into two-dimensional structures. The prepared multilayer structure can simulate lamellar structures of Harvard system and enhance the cytocompatibility of Ti substrate. Therefore, the method used in this work is a prospective method to improve the inherently bio-inert of Ti when used in hard tissue repairing.

A biological method for in-situ synthesis of hydroxyapatite-coated magnetite nanoparticles using Enterobacter aerogenes: Characterization and acute toxicity assessments

Hydroxyapatite (HA)-coated magnetite nanoparticles (MNPs) are being widely investigated for various applications in medical engineering and wastewater treatment. In this work, the MNPs were thoroughly coated by bacterial synthesized HA nanoparticles during biomineralization process using Enterobacter aerogenes. The resulting bacterial-induced precipitate was then calcined at 600°C and investigated with respect to structural characteristics, particle size and magnetic strength by XRD, FT-IR, SEM, EDS, TEM and VSM analyses. The effects of MNPs and HA-coated MNPs (HA-MNPs) on the viability of human MCF-7 cell lines were also investigated via mitochondrial activity test (MTT) and lactate dehydrogenase (LDH) assays. The powder characterization results showed appropriate structural properties for HA-MNPs samples. The particles diameter size of the MNPs and HA-MNPs were in the range of 3-25nm and 20-80nm, respectively. The biologically-synthesized HA-MNPs formed a stable suspension in water while keeping their magnetic property. The saturation magnetization (Ms) of HA-MNPs was measured at ~10emug^-1 which was in good agreement with the structural composition of this sample. Finally, the results of the cell lines viability indicated that coating of toxic MNPs via biomineralization was a promising approach in order to synthesize bio-compatible magnetic nanoparticles with suitable physical and chemical structural characteristics. The toxicity level of MNPs was reduced by 10 fold when coated by bacterial-synthesized HA.

Magnetic field assisted stem cell differentiation – role of substrate magnetization in osteogenesis

Substrate magnetization as a tool for modulating the osteogenesis of human mesenchymal stem cells for bone tissue engineering applications.

Biomimetic Scaffolds Containing Chitosan and Hydroxyapatite for Bone Tissue Engineering

In this work, genipin cross-linked chitosan (CS)/hydroxyapatite (HA) composite scaffolds were fabricated by a biomimetic method, followed by product freeze-drying. The fabricated composites were characterized by XRD, FT-IR, HRTEM, SEM and CLSM studies. Mechanical properties of the composite scaffolds have been significantly enhanced and can meet the demand of spongy bone. So the developed CS/HA scaffolds have advantageous and potential applications for bone tissue engineering.

Influence of the titania nanotubes dimensions on adsorption of collagen: an experimental and computational study

To investigate the influence of the titanium nanotube (TiNT) diameters on the adsorption of collagen type I (Col-I), TiNTs with different diameters were prepared with anodization. The adsorption amount of Col-I on the different TiNTs substrates was evaluated by spectrophotometric measurement and immunofluorescence staining, respectively. The results showed that the diameters of TiNTs played a key role in the adsorption process of Col-I. TiNTs with diameters around 100nm displayed a higher adsorption amount and faster adsorption speed than that of 30nm TiNTs. Furthermore, more collagen molecules were aggregated in the tubes of 100nm TiNTs. Molecular dynamics simulation was performed to elucidate the adsorption mechanism. The simulation results confirmed that physical adsorption was the main driving force, including van der Waals force and hydrogen bond between Col-I molecules and TiNTs. The calculated interaction energies indicated that the TiNTs with bigger dimensions had higher interaction energies, thus leading to the higher collagen adsorption.