Local microarchitecture affects mechanical properties of deposited extracellular matrix for osteonal regeneration

Development of bioinks for 3D printing microporous, sintered calcium phosphate scaffolds

Beta-tricalcium phosphate (β-TCP)-based bioinks were developed to support direct-ink 3D printing-based manufacturing of macroporous scaffolds. Binding of the gelatin:β-TCP ink compositions was optimized by adding carboxymethylcellulose (CMC) to maximize the β-TCP content while maintaining printability. Post-sintering, the gelatin:β-TCP:CMC inks resulted in uniform grain size, uniform shrinkage of the printed structure, and included microporosity within the ceramic. The mechanical properties of the inks improved with increasing β-TCP content. The gelatin:β-TCP:CMC ink (25:75 gelatin:β-TCP and 3% CMC) optimized for mechanical strength was used to 3D print several architectures of macroporous scaffolds by varying the print nozzle tip diameter and pore spacing during the 3D printing process (compressive strength of 13.1 ± 2.51 MPa and elastic modulus of 696 ± 108 MPa was achieved). The sintered, macroporous β-TCP scaffolds demonstrated both high porosity and pore size but retained mechanical strength and stiffness compared to macroporous, calcium phosphate ceramic scaffolds manufactured using alternative methods. The high interconnected porosity (45-60%) and fluid conductance (between 1.04 ×10^-9 and 2.27 × 10^-9 m⁴s/kg) of the β-TCP scaffolds tested, and the ability to finely tune the architecture using 3D printing, resulted in the development of novel bioink formulations and made available a versatile manufacturing process with broad applicability in producing substrates suitable for biomedical applications.

Electrospun 3D Scaffolds for Tissue Regeneration

Tissue engineering aims to fabricate and functionalise constructs that mimic the native extracellular matrix (ECM) in the closest way possible to induce cell growth and differentiation in both in vitro and in vivo conditions. Development of scaffolds that can function as tissue substitutes or augment healing of tissues is an essential aspect of tissue regeneration. Although there are many techniques for achieving this biomimicry in 2D structures and 2D cell cultures, translation of successful tissue regeneration in true 3D microenvironments is still in its infancy. Electrospinning, a well known electrohydrodynamic process, is best suited for producing and functionalising, nanofibrous structures to mimic the ECM. A systematic control of the processing parameters coupled with novel process innovations, has recently resulted in novel 3D electrospun structures. This chapter gives a brief account of the various 3D electrospun structures that are being tried as tissue engineering scaffolds. Combining electrospinning with other 3D structure forming technologies, which have shown promising results, has also been discussed. Electrospinning has the potential to bridge the gap between what is known and what is yet to be known in fabricating 3D scaffolds for tissue regeneration.