Electropolymerization of taurine on gold surface and its sensory application for determination of captopril in undiluted human serum

Electrochemical Behavior of Janus Kinase Inhibitor Ruxolitinib at a Taurine-Electropolymerized Carbon Paste Electrode: Insights into Sensing Mechanisms

Ruxolitinib (RXL) is a Janus kinase inhibitor used for treating intermediate- or high-risk myelofibrosis. This study presents an electrode modified with electrochemically polymerized taurine on a carbon paste electrode via cyclic voltammetry (CV). The surface characterization of the poly(taurine)-CP electrode was evaluated by using electrochemical (electrochemical impedance spectroscopy─EIS, CV), morphological (scanning electron microscope─SEM), and spectroscopic (Fourier-transform infrared spectroscopy─FT-IR) techniques. Under optimized conditions, RXL exhibited good linearity within the 0.01-1.0 μM concentration range, with a limit of detection (LOD) of 0.005 μM. The proposed electrochemical sensor demonstrated excellent selectivity, accuracy, precision, and repeatability. Furthermore, it effectively detected RXL in human urine and pharmaceutical samples.

Enzymatic recognition of hydrogen peroxide (H2 O2 ) in human plasma samples using HRP immobilized on the surface of poly(arginine-toluidine blue)- Fe3 O4 nanoparticles modified polydopamine; A novel biosensor

In this study, an innovative strategy was proposed for the electrocatalytical reduction and enzymatic biosensing of hydrogen peroxide (H₂ O₂ ) using chronoamperometry technique. For the first time, immobilization of horseradish peroxidase (HRP) in polydopamine-modified magnetic nanoparticles (PDA-MNPs) was successfully performed. Also, poly(l-arginine/toluidine blue) film-modified glassy carbon electrode was constructed through co-electropolymerization of l-arginine and toluidine blue on the surface of GCE using cyclic voltammetry technique. The engineered hybrid thin film provides strong functionalities for efficient grafting of PDA-MNPs which, in turn, enable the covalent immobilization of HRP. The proposed biosensor was used for the detection of H₂ O₂ in the range of 0.5-30 μM with a low limit of quantification 0.23 μM. It also was successfully applied for the investigation of hydrogen peroxide in human plasma samples.

Elastic Properties of Taurine Single Crystals Studied by Brillouin Spectroscopy

The inelastic interaction between the incident photons and acoustic phonons in the taurine single crystal was investigated by using Brillouin spectroscopy. Three acoustic phonons propagating along the crystallographic b-axis were investigated over a temperature range of −185 to 175 °C. The temperature dependences of the sound velocity, the acoustic absorption coefficient, and the elastic constants were determined for the first time. The elastic behaviors could be explained based on normal lattice anharmonicity. No evidence for the structural phase transition was observed, consistent with previous structural studies. The birefringence in the ac-plane indirectly estimated from the split longitudinal acoustic modes was consistent with one theoretical calculation by using the extrapolation of the measured dielectric functions in the infrared range.

In-situ graft-crosslinked gold nanoparticles with high-density surface defects and coated with a polytaurine membrane for the voltammetric determination of dopamine

Well-dispersed and graft-crosslinked gold nanoparticles (AuNPs) were synthesized by the reduction of tetrachloroaurate with hydrazine at room temperature. The AuNPs possess a high density of surface defects which is due to grafting of n-octanoic acid to polyvinylpyrrolidone. The physical and chemical properties of the resulting AuNPs were characterized by UV-vis, XRD, TEM/HRTEM, SAED, and XPS, respectively. The modified AuNPs were placed on a glassy carbon electrode (GCE) in an electropolymerized taurine layer to obtain a sensitive, selective, stable and rapid electrochemical dopamine sensor. The peak current, typically measured at 0.17 V (vs. SCE), increases linearly in the 1.0 to 120 μM dopamine concentration range, and the limit of detection (at S/N = 3) is 0.16 μM with a sensitivity of 2.94 μA·μM^-1·cm^-2. The sensor was successfully applied to the determination of dopamine in injections and spiked serum samples. The recoveries from spiked serum samples range from 97.5 to 102.4%, with RSDs ranging between 2.8 and 3.4%. Graphical abstract Schematic representation of a glassy carbon electrode modified with in-situ graft-crosslinked gold nanoparticles combined with an electropolymerized polytaurine membrane. The sensor exhibits excellent features towards dopamine determination.

Recent Progress in the Analysis of Captopril Using Electrochemical Methods: A Review

Background:

Captopril is the synthetic dipeptide used as an angiotensin converting enzyme inhibitor. Captopril is used to treat hypertension as well as for the treatment of moderate heart failure. Analytical instrumentation and methodology plays an important role in pharmaceutical analysis.

Methods:

This review presents some important applications of electrochemical modes used for the analysis of captopril. So far captopril has been analyzed by using different bare and modified working electrodes with a variety of modifiers from organic and inorganic materials to various types of nano particles/materials.

Results:

This paper presents some of the methods which have been published in the last few years i.e. from 2003 to 2016. This review highlights the role of the analytical instrumentation, particularly electrochemical methods in assessing captopril using various working electrodes.

Conclusion:

A large number of studies on voltammetry noted by means of various bare and modified electrodes. Among all of the published voltammetric methods, DPV, SWV, CV and miscellaneous modes were trendy techniques used to analyze captopril in pharmaceutical formulations as well as biological samples. Electrodes modified with nanomaterials are promising sensing tools as this showed high sensitivity, good accuracy with precision as well as selectivity. In comparison to chromatographic methods, the main advantages of electrochemical methods are its cheaper instrumentation, lower detection limit and minimal or no sample preparation.

Mechanochemical Green Synthesis of Exfoliated Edge-Functionalized Boron Nitride Quantum Dots: Application to Vitamin C Sensing through Hybridization with Gold Electrodes

Two-dimensional boron nitride quantum dots (2D BNQDs) with excellent chemical stability, high photoluminescence efficiency, and low toxicity are a new class of advanced materials for biosensing and bioimaging applications. To overcome the current challenge about the lack of facile, scalable, and reproducible synthesis approach of BNQDs, we introduce a green and facile approach based on mechanochemical exfoliation of bulk h-BN particles in ethanol. Few-layered hydroxylated-functionalized QDs with a thickness of 1-2 nm and a lateral dimension of 2-6 nm have been prepared. The synthesized nanocrystals exhibit a strong fluorescence emission at 407 and 425 nm with a quantum efficiency of ∼6.2%. Spectroscopic analyses determine that interactions between oxygen groups of the solvent with boron sites occur, which along with the mechanical forces, lead to efficient exfoliation of the hexagonal structure and surface functionalization with -OH groups. We also demonstrate that the orbital interaction between BNQDs and the gold surface results in a profound electrochemical catalytic activity toward oxidation of vitamin C. It is shown that the BNQD-modified screen-printed gold electrode exhibits a decreased onset oxidation potential for about 0.37 V/AgCl. In addition to high catalytic activity, electrochemical studies also reveal that this electrode allows selective and sensitive detection of vitamin C with a good response over a wide range from 0.80 μM to 5.0 mM with a detection limit of 0.45 μM (S/N = 3) and a sensitivity of 1.3 μA μM^-1 cm^-2. Finally, the potential application of the hybrid sensor for detecting vitamin C in commercial drinks is demonstrated.

Ultrasensitive immunoassay of carcinoma antigen 125 in untreated human plasma samples using gold nanoparticles with flower like morphology: A new platform in early stage diagnosis of ovarian cancer and efficient management

Ovarian cancer, as one of the most life-threatening malignancies among women worldwide, is usually diagnosed at the late stage despite up regulation of molecular markers such as carcinoma antigen 125 (CA 125) at the early stages of the malignancy. CA 125 is the only tumor marker recommended for clinical use in the diagnosis and management of ovarian cancer. The potential role of CA-125 for the early detection of ovarian cancer is controversial and has not yet been adopted for widespread screening efforts in asymptomatic women. Therefore, early detection of CA 125 in human biofluids is highly demanded. In the present study, a novel method was proposed for the fabrication of electrochemical immunosensor based reduced graphene oxide (RGO). Cysteamine capped gold nanoparticle (Cys-AuNPs) were deposited over the surface of ERGO probe using electrophoretic deposition method. These Cys-AuNPs/ERGO probes provide the favorable sites to attach the monoclonal antibody specific to CA 125 antigen. Cyclic voltammetry (CV), and square wave voltammetry (SWV) were applied for the electrochemical recognition of the biolayer. The represented signals demonstrates excellent figure of merits and good capability of the engineered immunosensor towards sensitive detection of CA 125. Quantitative measurements of CA 125 in human plasma samples have been demonstrated, showing the potential of the practical application of this novel immunosensor for the analysis of this biomarker in blood serum samples. This immunosensor has the ability of direct electron transfer as compared to earlier reported electrochemical immunosensors based electrochemical methods. Further, this immunosensor provides a very suitable and convenient alternative to replace the expensive commercially available methods such as immunohistochemistry. The following regression equation between the electrochemical current response and the CA 125 concentration range from 0.1 to 400 U/mL was found. The low limit of quantification for this immunosensor was 0.1 U/mL. To the best of our knowledge, this is the first reported on the direct immobilization of antibody on the surface of Cys-AuNPs/ERGO for fabrication of immunosensors.

Infrared dispersion analysis and Raman scattering spectra of taurine single crystals

A comprehensive set of optical vibrational modes of monoclinic taurine crystals was determined by Raman scattering, and infrared reflectivity and transmission spectroscopies. By using appropriate scattering/reflection geometries, the vibrational modes were resolved by polarization and the most relevant modes of the crystal could be assigned. In particular, we were able to review the symmetry of the gerade modes and to resolve ambiguities in the literature. Owing to the non-orthogonal character of B_u modes in monoclinic crystals (lying on the optic axial plane), we carried out a generalized Lorentz dispersion analysis consisting of simultaneous adjust of infrared-reflectivity spectra at various light polarization angles. The A_u modes (parallel to the C₂-axis) were treated within the classical Lorentz model. The behavior of off-diagonal and diagonal terms of the complex dielectric tensors and the presence of anomalous dispersion were discussed as consequences of the low symmetry of the crystal.

Pharmacogenomic study using bio- and nanobioelectrochemistry: Drug-DNA interaction

Small molecules that bind genomic DNA have proven that they can be effective anticancer, antibiotic and antiviral therapeutic agents that affect the well-being of millions of people worldwide. Drug-DNA interaction affects DNA replication and division; causes strand breaks, and mutations. Therefore, the investigation of drug-DNA interaction is needed to understand the mechanism of drug action as well as in designing DNA-targeted drugs. On the other hand, the interaction between DNA and drugs can cause chemical and conformational modifications and, thus, variation of the electrochemical properties of nucleobases. For this purpose, electrochemical methods/biosensors can be used toward detection of drug-DNA interactions. The present paper reviews the drug-DNA interactions, their types and applications of electrochemical techniques used to study interactions between DNA and drugs or small ligand molecules that are potentially of pharmaceutical interest. The results are used to determine drug binding sites and sequence preference, as well as conformational changes due to drug-DNA interactions. Also, the intention of this review is to give an overview of the present state of the drug-DNA interaction cognition. The applications of electrochemical techniques for investigation of drug-DNA interaction were reviewed and we have discussed the type of qualitative or quantitative information that can be obtained from the use of each technique.