Electrochemical sensing platform for L-CySH based on nearly uniform Au nanoparticles decorated graphene nanosheets

Glassy carbon electrode modified with a film of tetraruthenated nickel(ii) porphyrin located in natural smectite clay's interlayer for the simultaneous sensing of dopamine, acetaminophen and tryptophan

A supramolecular complex μ-meso-tetra(4-pyridyl) porphyrinate nickel(ii)tetrakis[bis(bipyridine)(chloro)ruthenium(ii)] ([NiTPyP{Ru(bipy)2Cl}4]4+) was intercalated into the interlayer space of natural smectite clay (shortened as Ba) collected in a Cameroonian deposit at Bagba hill. Physicochemical characterization of the resulting material using ultraviolet-visible spectroscopy (UV-vis), Fourier transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD) confirmed the intercalation of the porphyrin within the interlayer space of the clay. The intercalated clay was then used to form a stable thin film onto a glassy carbon electrode (GCE) by drop casting a suspension of the hybrid material. The GCE modified with the intercalated organoclay endowed the electrode with a larger electrochemically active surface area, good stability, high selectivity, and sensitivity toward dopamine (DA), acetaminophen (AC) and tryptophan (Trp). In addition, it was observed that the modified electrodes exhibited good and pH-dependent electrocatalytic properties toward these analytes. The simultaneous determination of DA, AC and Trp at [NiTPyP{Ru(bipy)2Cl}4]4+-Ba/GCE was thus possible without the interference of one analyte on the others, and the resulting calibration curve exhibits two segments for the three analytes. For DA, AC and Trp, the detection limits were found to be 0.8 μM, 0.3 μM and 0.3 μM, respectively. The [NiTPyP{Ru(bipy)2Cl}4]4+-Ba/GCE modified electrodes were successfully applied for the determination of AC in Paracetamol, a commercial product, and Trp in real pharmaceutical formulation samples.

Enzyme-Free Electrochemical Sensors for in situ Quantification of Reducing Sugars Based on Carboxylated Graphene-Carboxylated Multiwalled Carbon Nanotubes-Gold Nanoparticle-Modified Electrode

The reducing sugars of plants, including glucose, fructose, arabinose, galactose, xylose, and mannose, are not only the energy source of plants, but also have the messenger function of hormones in signal transduction. Moreover, they also determine the quality and flavor of agricultural products. Therefore, the in situ quantification of reducing sugars in plants or agriculture products is very important in precision agriculture. However, the upper detection limit of the currently developed sugar sensor is not high enough for in situ detection. In this study, an enzyme-free electrochemical sensor for in situ detection of reducing sugars was developed. Three-dimensional composite materials based on carboxylated graphene-carboxylated multi-walled carbon nanotubes attaching with gold nanoparticles (COOH-GR-COOH-MWNT-AuNPs) were formed and applied for the non-enzymatic determination of glucose, fructose, arabinose, mannose, xylose, and galactose. It was demonstrated that the COOH-GR-COOH-MWNT-AuNP-modified electrode exhibited a good catalysis behavior to these reducing sugars due to the synergistic effect of the COOH-GR, COOH-MWNT, and AuNPs. The detection range of the sensor for glucose, fructose, arabinose, mannose, xylose, and galactose is 5-80, 2-20, 2-50, 5-60, 2-40, and 5-40 mM, respectively. To our knowledge, the upper detection limit of our enzyme-free sugar sensor is the highest compared to previous studies, which is more suitable for in situ detection of sugars in agricultural products and plants. In addition, this sensor is simple and portable, with good reproducibility and accuracy; it will have broad practical application value in precision agriculture.

One-dimensional nitrogen doped porous carbon nano-array arranged by carbon nanotubes for electrochemical sensing ascorbic acid, dopamine and uric acid simultaneously

In this work, one-dimensional nitrogen doped porous carbon nano-arrays arranged by carbon nanotube (1D CNTs@NPC) were first constructed, using a coating technology at room temperature and followed by high temperature carbonization. It was expected that the resulting glassy carbon electrodes modified by 1D CNTs@NPC (CNTs@NPC/GCE) could express different electrochemical responses to ascorbic acid (AA), dopamine (DA), uric acid (UA), by virtue of the synergistic-improved effect between CNTs and NPC. Under the optimized conditions, there were excellent analytical parameters for CNTs@NPC/GCE to detect AA, DA and UA, i.e. a wide linear range of 40-2100μM for AA, 0.5-49μM for DA and 3-50μM for AA with low detection limits of 0.36μM, 0.02μmol l^-1and 0.57μM respectively. Importantly, the proposed CNTs@NPC/GCE was efficiently applied to determine AA, DA and UA in some real samples with high stability, reproducibility and selectivity. This work will offer an efficient potential for diagnosing ascorbic acid, dopamine or uric acid-related diseases on clinical testing in future.

Simultaneous quantification of acetaminophen and tryptophan using a composite graphene foam/Zr-MOF film modified electrode

Derived synergistic effect of a composite results in high selectivity and sensitivity with low detection limits and wide concentration ranges.

Disposable stainless steel-based electrochemical microsensor for in vivo determination of indole-3-acetic acid in soybean seedlings

In vivo detecting of plants signal molecules is of great importance for the precision farming, crop management and plant phenotyping. In this work, for in vivo detecting indole-3-acetic acid (IAA), one of phytohormones, fine stainless steel (SS) wire was used as electrode material. Highly ordered nanopores, popcorn-like Au nanostructures, Pt nanoparticles and reduced graphene oxide (ERGO) nanocomposite films, and polymerized ST film (PST) were fabricated on the SS microelectrode in turn for improving the detection effect. Using the as-prepared SS microelectrode as working electrode, two untreated SS wires as reference electrode and counter electrode respectively, a disposable electrochemical microsensor for IAA were developed. The microsensor exhibited excellent selectivity and high sensitivity with low detection limit (LOD) of 43 pg mL-1. The limit of quantity (LOQ) is 143 pg mL-1. The RSD was 7% for 12 different PST/Pt-ERGO/Au/a-SS microsensors in presence of 100 µg mL-1 IAA. Using this microsensor, IAA of the stem of soybean seedlings was detected in vivo under salt stress. Our result was also confirmed by ultra-performance liquid chromatography-mass spectrum (UPLC-MS). This is the first report for the in vivo detection of IAA in plants using SS-based electrochemical microsensor. Our sensor provides an excellent sensing platform for detecting IAA in plants in vivo.

Facile synthesis of g-C3N4 with various morphologies for application in electrochemical detection

In the present study, g-C₃N₄ with various morphologies was successfully synthesized via a variety of facile in situ methods. The as-prepared products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy and X-ray diffraction (XRD). The results obtained using square wave anodic stripping voltammetry (SWASV) showed that when g-C₃N₄ was applied as an electrochemical sensor, it exhibited excellent sensitivity and selectivity for the detection of heavy metal ions including Pb(ii), Cu(ii) and Hg(ii). Compared to nanoporous graphitic carbon nitride (npg-C₃N₄) and g-C₃N₄ nanosheet-modified glass carbon electrode (GCE), g-C₃N₄ successfully realized the individual and simultaneous detection of four target heavy ions for the first time. In particular, g-C₃N₄ displayed significant electrocatalytic activity towards Hg(ii) with a good sensitivity of 18.180 μA μM⁻¹ and 35.923 μA μM⁻¹ under the individual and simultaneous determination conditions, respectively. The sensitivity for simultaneous determination was almost 2 times that of the individual determination. Moreover, the fabricated electrochemical sensor showed good anti-interference, stability and repeatability; this indicated significant potential of the proposed materials for application in high-performance electrochemical sensors for the individual and simultaneous detection of heavy metal ions.

In the present study, g-C₃N₄ with various morphologies was successfully synthesized via a variety of facile in situ methods.

An Electrochemical Sensor of Poly(EDOT-pyridine-EDOT)/Graphitic Carbon Nitride Composite for Simultaneous Detection of Cd2+ and Pb2

In this study, poly(2,5-bis(3,4-ethylenedioxythienyl)pyridine)/graphitic carbon nitride composites (poly(BPE)/g-C₃N₄) were prepared by an in situ chemical polymerization method. Composites were characterized by using Fourier transform infrared spectroscopy (FT-IR), ultraviolet⁻visible absorption spectra (UV⁻vis), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Furthermore, electrochemical sensors were applied for the electrochemical determination of Cd²⁺ and Pb²⁺ using the differential pulse voltammetry (DPV) method. The results indicated that 10 wt % poly(BPE)/g-C₃N₄ composite-modified electrode exhibited linear detection ranging from 0.12 to 7.2 μM and 0.08 to 7.2 μM for Cd²⁺ and Pb²⁺, with detection limits (S/N = 3) of 0.018 μM and 0.00324 μM. Interference analysis suggested that the 10 wt % poly(BPE)/g-C₃N₄-modified electrode can be applied for the detection of the Cd²⁺ and Pb²⁺ in real samples.

Electrochemical Aptasensor for Myoglobin-Specific Recognition Based on Porphyrin Functionalized Graphene-Conjugated Gold Nanocomposites

In this work, a novel electrochemical aptasensor was developed for sensitive and selective detection of myoglobin based on meso-tetra (4-carboxyphenyl) porphyrin-functionalized graphene-conjugated gold nanoparticles (TCPP–Gr/AuNPs). Due to its good electric conductivity, large specific surface area, and excellent mechanical properties, TCPP–Gr/AuNPs can act as an enhanced material for the electrochemical detection of myoglobin. Meanwhile, it provides an effective matrix for immobilizing myoglobin-binding aptamer (MbBA). The electrochemical aptasensor has a sensitive response to myoglobin in a linear range from 2.0 × 10⁻¹¹ M to 7.7 × 10⁻⁷ M with a detection limit of 6.7 × 10⁻¹² M (S/N = 3). Furthermore, the method has the merits of high sensitivity, low price, and high specificity. Our work will supply new horizons for the diagnostic applications of graphene-based materials in biomedicine and biosensors.

Engineered Carbon-Nanomaterial-Based Electrochemical Sensors for Biomolecules

The study of electrochemical behavior of bioactive molecules has become one of the most rapidly developing scientific fields. Biotechnology and biomedical engineering fields have a vested interest in constructing more precise and accurate voltammetric/amperometric biosensors. One rapidly growing area of biosensor design involves incorporation of carbon-based nanomaterials in working electrodes, such as one-dimensional carbon nanotubes, two-dimensional graphene, and graphene oxide. In this review article, we give a brief overview describing the voltammetric techniques and how these techniques are applied in biosensing, as well as the details surrounding important biosensing concepts of sensitivity and limits of detection. Building on these important concepts, we show how the sensitivity and limit of detection can be tuned by including carbon-based nanomaterials in the fabrication of biosensors. The sensing of biomolecules including glucose, dopamine, proteins, enzymes, uric acid, DNA, RNA, and H2O2 traditionally employs enzymes in detection; however, these enzymes denature easily, and as such, enzymeless methods are highly desired. Here we draw an important distinction between enzymeless and enzyme-containing carbon-nanomaterial-based biosensors. The review ends with an outlook of future concepts that can be employed in biosensor fabrication, as well as limitations of already proposed materials and how such sensing can be enhanced. As such, this review can act as a roadmap to guide researchers toward concepts that can be employed in the design of next generation biosensors, while also highlighting the current advancements in the field.

Gold nanoparticles/Orange II functionalized graphene nanohybrid based electrochemical aptasensor for label-free determination of insulin

Nanocomposites, gold nanoparticles on Orange II functionalized graphene (AuNPs/O-GNs), were developed to modify the electrode surface for anchoring an insulin binding aptamer.

A novel cysteine sensor based on modification of carbon paste electrode by Fe(II)-exchanged zeolite X nanoparticles

An electrochemical sensor based on carbon paste electrode (CPE) modified with iron(II) doped into a synthesized nano-particles of zeolite X (Fe(II)-NX/ZCME) was constructed, which is highly sensitive for detection of cysteine (Cys). The modified electrode showed an excellent electro-activity for oxidation of Cys in phosphate buffer at pH7.4. It has been found that anodic peak potential of Cys oxidation, compared with the unmodified CPE (UCPE), was shifted towards negative values at the surface of the modified electrode under the optimum condition. The peak current increased linearly with the Cys concentration in the wide range of 5.0 × 10(-9)-3.0 × 10(-3) mol L(-1). The very low detection limit was obtained to be 1.5 × 10(-10) mol L(-1). Finally, the modified electrode was used as a selective, simple and precise new electrochemical sensor for the determination of Cys in the real samples, such as pharmaceutical and biological fluids.