Synthesis of highly fluorescent hydrophobic carbon dots by hot injection method using Paraplast as precursor

Graphene-based nanomaterials for cancer therapy and anti-infections

Graphene-based nanomaterials (GBNMs) has been thoroughly investigated and extensively used in many biomedical fields, especially cancer therapy and bacteria-induced infectious diseases treatment, which have attracted more and more attentions due to the improved therapeutic efficacy and reduced reverse effect. GBNMs, as classic two-dimensional (2D) nanomaterials, have unique structure and excellent physicochemical properties, exhibiting tremendous potential in cancer therapy and bacteria-induced infectious diseases treatment. In this review, we first introduced the recent advances in development of GBNMs and GBNMs-based treatment strategies for cancer, including photothermal therapy (PTT), photodynamic therapy (PDT) and multiple combination therapies. Then, we surveyed the research progress of applications of GBNMs in anti-infection such as antimicrobial resistance, wound healing and removal of biofilm. The mechanism of GBNMs was also expounded. Finally, we concluded and discussed the advantages, challenges/limitations and perspective about the development of GBNMs and GBNMs-based therapies. Collectively, we think that GBNMs could be potential in clinic to promote the improvement of cancer therapy and infections treatment.

•

Development of GBNMs with unique structure and excellent properties.

•

GBNMs-based therapies for anticancer with improved therapeutic efficacy.

•

GBNMs with antimicrobial activity are widely used in anti-infections.

•

The challenges and perspective of GBNMs for clinical use were thoroughly discussed.

Yellow-Emitting Hydrophobic Carbon Dots via Solid-Phase Synthesis and Their Applications

The preparation and application of hydrophobic carbon dots (HCDs) are now the hotspots in the field of nanomaterials. This paper reports the fast synthesis of long-wavelength-emitting HCDs (yellow-emitting, λ_em = 541 nm) through a solid-phase route, with l-cysteine hydrochloride anhydrous and citric acid as carbon sources and dicyclohexylcarbodiimide as a dehydrating agent, reacting at 180 °C for 40 min, with a quantum yield of 30%. The solid-phase route avoids the usage of organic reagents during the synthesis process and is thus environmentally friendly. The obtained HCDs can be simply separated into HCDs-L (less density) and HCDs-W (higher density) with differences in physical (polarity, density), optical, and chemical properties. The differences in HCDs-L, HCDs-W, and water-soluble CDs (WCDs) were compared through various characterization methods, and the synthesis and luminescence mechanisms of HCDs were investigated. Meanwhile, HCDs were employed in the fields of LED lamp production and solid fluorescent shaping material. The prepared HCDs were then modified into WCDs through the liposomal embedding method. The HCDs prepared by the new solid-phase route exhibit stable and highly efficient photoluminescence ability and will have a promising outlook in their applications in various fields.

High antiviral activity of mercaptoethane sulfonate functionalized Te/BSA nanostars against arterivirus and coronavirus

Mercaptoethane sulfonate functionalised Te/BSA nanostars are prepared and exhibit excellent antiviral activity against arteriviruses and coronaviruses.

Graphene Quantum Dots for Cell Proliferation, Nucleus Imaging, and Photoluminescent Sensing Applications

We report a simple one-pot microwave assisted "green synthesis" of Graphene Quantum Dots (GQDs) using grape seed extract as a green therapeutic carbon source. These GQDs readily self-assemble, hereafter referred to as "self-assembled" GQDs (sGQDs) in the aqueous medium. The sGQDs enter via caveolae and clathrin-mediated endocytosis and target themselves into cell nucleus within 6-8 h without additional assistance of external capping/targeting agent. The tendency to self-localize themselves into cell nucleus also remains consistent in different cell lines such as L929, HT-1080, MIA PaCa-2, HeLa, and MG-63 cells, thereby serving as a nucleus labelling agent. Furthermore, the sGQDs are highly biocompatible and act as an enhancer in cell proliferation in mouse fibroblasts as confirmed by in vitro wound scratch assay and cell cycle analysis. Also, photoluminescence property of sGQDs (lifetime circa (ca.) 10 ns) was used for optical pH sensing application. The sGQDs show linear, cyclic and reversible trend in its fluorescence intensity between pH 3 and pH 10 (response time: ~1 min, sensitivity -49.96 ± 3.5 mV/pH) thereby serving as a good pH sensing agent. A simple, cost-effective, scalable and green synthetic approach based sGQDs can be used to develop selective organelle labelling, nucleus targeting in theranostics, and optical sensing probes.

Fabrication of luminescent TiO2:Eu3+ and ZrO2:Tb3+ encapsulated PLGA microparticles for bioimaging application with enhanced biocompatibility

Rare earth is of great interest because of their unique optical properties, especially the rich luminescent spectra. In this study, we developed a facile one-pot microwave-assisted synthesis of luminescent Eu³⁺ doped TiO₂ nanoparticles and Tb³⁺ doped ZrO₂ nanoparticles. As a result, the emitting centers (Eu³⁺ and Tb³⁺) were all well dispersed in the amorphous host oxide materials, leading to high luminescence. The obtained TiO₂:Eu³⁺ and ZrO₂:Tb³⁺ nanoparticles were then encapsulated into PLGA microparticles for bio-applications. These luminescent microparticles were then proven to be highly stable, biocompatible and of low cytotoxicity. We successfully demonstrated the bioimaging of live cells using the red-luminescent TiO₂:Eu³⁺ nanoparticles and green-luminescent ZrO₂:Tb³⁺ nanoparticles embedded PLGA microparticles. The microwave-assisted synthetic methodology can be further developed to be general method to prepare oxide nanoparticles.

Understanding the Capsanthin Tails in Regulating the Hydrophilic-Lipophilic Balance of Carbon Dots for a Rapid Crossing Cell Membrane

Here we use natural Chinese paprika to prepare a new kind of amphiphilic carbon dot (A-Dot) that exhibits bright, multicolored fluorescence and contains hydrophilic groups as well as lipophilic capsanthin tails on the surface. It is found that the capsanthin tails in a phospholipid-like structure can promote cell internalization of the A-Dots via crossing cell membranes rapidly in an energy-independent fashion. Compared to highly hydrophilic carbon dots (H-Dots), a control sample prepared from the microwave thermolysis of citric acid and ethylenediamine, our synthesized A-Dots can be taken up by CHO, HeLa, and HFF cells more easily. More importantly, we develop a method to calibrate the hydrophilic-lipophilic balance (HLB) values of various kinds of carbon dots (C-Dots). HLB values of A-Dots and H-Dots are determined to be 6.4 and 18.4, respectively. Moreover, we discover that the cellular uptake efficiency of C-Dots is closely related to their HLBs, and the C-Dots with an HLB value of around 6.4 cross the cell membrane easier and faster. As we regulate the HLB value of the A-Dots from 6.4 to 15.3 by removing the capsanthin tails from their surfaces via alkali refluxing, it is found that the refluxed A-Dots can hardly cross HeLa cell membranes. Our work is an essential step toward understanding the importance of regulating the HLB values as well as the surface polarity of the C-Dots for their practical use in bioimaging and also provides a simple but effective way to judge whether the C-Dots in hand are appropriate for cell imaging.

Microwave assisted synthesis of luminescent carbonaceous nanoparticles from silk fibroin for bioimaging

Bombyx mori silk as a natural protein based biopolymer with high nitrogen content, is abundant and sustainable because of its mass product all over the world per year. In this study, we developed a facile and fast microwave-assisted synthesis of luminescent carbonaceous nanoparticles using Bombyx mori silk fibroin and silk solution as the precursors. As a result, the obtained carbonaceous nanoparticles exhibit a photoluminescence quantum yield of ~20%, high stability, low cytotoxicity, high biocompatibility. Most importantly, we successfully demonstrated bioimaging using these luminescent carbonaceous nanoparticles with excitation dependent luminescence. In addition, the microwave-assisted hydrothermal method can be extended to convert other biomass into functional nanomaterials.

Construction of biodegradable and biocompatible AIE-active fluorescent polymeric nanoparticles by Ce(IV)/HNO3 redox polymerization in aqueous solution

Aggregation-induced emission (AIE) active fluorescence polymeric nanoparticles (FPNs) have recently received increasing interests for biomedical applications such as cell imaging, drug delivery, disease diagnosis and treatment. Fabricated strategies of AIE-active FPNs with high efficiency, simplification and tenderness are still passionately pursued to promote the development of theranostic systems. In this work, we develop a facile method for the preparation of AIE-active FPNs by adopting Ce(IV)/HNO₃ redox polymerization under near room temperature. Thus-prepared FPNs (named as PEG-PLC-1) possess unique AIE feature, great water dispersity, excellent biocompatibility and biodegradability because of the conjugation of ultra-bright AIE dye (PhE-alc) and biodegradable PEG-PCL linear copolymers. The ¹H nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), UV-Visible and fluorescence spectrometers were used to confirm the successful fabrication of AIE-active FPNs. Cell viability and cellular uptake behavior of PEG-PLC-1 FPNs were further investigated for their potential biomedical applications. Results demonstrated that PEG-PLC-1 FPNs are high water dispersity, intensive luminescence and low cytotoxicity, making them very attractive for biomedical applications. More importantly, the method for the fabrication of AIE-active biodegradable FPNs can be occurred under rather facile conditions (e.g., low temperature, free of metal catalysts, common chain transfer agent and aqueous solution) and are specially used for fabrication of AIE-active polysaccharides with poor organic solubility.

Facile synthesis of polymeric fluorescent organic nanoparticles based on the self-polymerization of dopamine for biological imaging

Polymeric fluorescent organic nanoparticles (polymer-FONs) have raised considerable research attention for biomedical applications owing to their advantages as compared with fluorescent inorganic nanoparticles and small organic molecules. In this study, we presented an efficient, facile and environment-friendly strategy to produce polymer-FONs, which relied on the self-polymerization of dopamine and polyethyleneimine (PEI) in rather mild conditions. To obtain the final polymer-FONs, aldehyde group-containing copolymers (named as poly(UA-co-PEGMA)) were synthesized by reversible addition-fragmentation chain-transfer polymerization using polyethylene glycol methyl ether methacrylate (PEGMA) and 1-undecen-10-al (UA) as monomers. The dopamine was conjugated onto poly(UA-co-PEGMA) through a multicomponent reaction between UA and dopamine to obtain poly(UA-co-PEGMA)-DA, which was further utilized for preparation of polymer-FONs through self-polymerization of dopamine and PEI. ¹H nuclear magnetic resonance, Fourier transform infrared spectroscopy, transmission electron microscopy and fluorescence spectroscopy were employed to characterize the structure, morphology, compositions and optical properties of these polymer-FONs. Cell viability and cell uptake behavior results suggested that these polymer-FONs possess good biocompatibility and can be potentially utilized for biomedical applications. More importantly, the method can be also applied to fabricate many other multifunctional polymer-FONs with great potential for biomedical applications.

Polymerizable aggregation-induced emission dye for preparation of cross-linkable fluorescent nanoprobes with ultra-low critical micelle concentrations

In recent years, aggregation-induced emission (AIE) dyes based fluorescent organic nanoparticles (FONs) have achieved significant progress in various biomedical applications. In this work, we developed a covalent strategy to prepare biocompatible AIE-active dyes based cross-linked copolymers (MPC-POSS-PhE) via controllable reversible addition fragmentation chain transfer (RAFT) polymerization using zwitterionic 2-methacryloyloxyethyl phosphorylcholine (MPC), polymerizable AIE dye (named as PhE) and 8-vinyl polyoctahedral silsesquioxanes (POSS) as monomers. Due to the existence of hydrophilic MPC and hydrophobic PhE, the resultant copolymers will self-assemble into core-shell nanoparticles in aqueous solution with ultra-low critical micelle concentration (CMC). This could effectively overcome the drawbacks of non-crosslinked micelles and show more attractive properties and better performance for biomedical applications. Furthermore, the characterization results and biological assays demonstrated that the final MPC-POSS-PhE FONs show stable aqueous stability, uniform size and morphology, high water dispersity, desirable optical properties and low cytotoxicity. These remarkable properties make the resultant AIE-active nanoprobes great potential for biomedical applications.

A simplistic approach to green future with eco-friendly luminescent carbon dots and their application to fluorescent nano-sensor 'turn-off' probe for selective sensing of copper ions

Zero-dimensional fluorescent nanoparticles having specificity as molecular probe appears to be strategically balanced fluorescent nano-probes. In this work, purified lemon extract and l-arginine have been thermally coupled for the extremely acute detection of Cu²⁺ in aqueous medium. The Cu²⁺ ions may be captured by the amino groups on the surface of the nano-sensor to form cupric ammine complex resulting in quenched fluorescence via an inner filter effect. Our proposed nano-probe is N-doped carbon dots (NCDs) which are efficiently selective as fluorescent chemosensor due to enormous binding affinity towards Cu²⁺ in a wide range of concentration (0.05-300μM) within a few minutes.

Facile Fabrication of AIE-Active Fluorescent Polymeric Nanoparticles with Ultra-Low Critical Micelle Concentration Based on Ce(IV) Redox Polymerization for Biological Imaging Applications

Fluorescent polymeric nanoparticles (FPNs) with aggregation-induced emission (AIE) property have received increasing attention and possess promising biomedical application potential in the recent years. Many efforts have been devoted to the fabrication methodologies of FPNs and significant advance has been achieved. In this contribution, a novel strategy for the fabrication of AIE-active amphiphilic copolymers is reported for the first time based on the Ce(IV) redox polymerization. As an example, ene group containing AIE-active dye (named as Phe-alc) is directly grafted onto a water soluble polymer polyethylene glycol (PEG) in H₂ O/THF system under low temperature. Thus-obtained amphiphilic fluorescent polymers will self-assemble into FPNs with ultra-low critical micelle concentration, ultra-brightness, and great water dispersibility. Biological evaluation results suggest that the PEG-poly(Phe-alc) possess excellent biocompatibility and can be used for tracing their behavior in cells using confocal laser scanning microscope. These features make PEG-poly(Phe-alc) FPNs promising candidates for many biomedical applications, such as cell imaging, drug delivery vehicles, and targeted tracing. More importantly, many other functional groups can also be incorporated into these AIE-active FPNs through the redox polymerization. Therefore, the redox polymerization should be a facile and effective strategy for fabrication of AIE-active FPNs.

Multifunctional graphene quantum dots for combined photothermal and photodynamic therapy coupled with cancer cell tracking applications

An Indian fig tree serves as a green factory by providing withered leaves as a carbon source for graphene quantum dots synthesis. The quantum dots are multi-functional and have tremendous theranostic biomedical applications.

One-step synthesis, self-assembly and bioimaging applications of adenosine triphosphate containing amphiphilies with aggregation-induced emission feature

Amphiphilic molecules with aggregation-induced emission (AIE) characteristics have attracted intensive interest for biological imaging applications for their self-assembly into nanostructures and obvious enhanced fluorescence intensity in aqueous solution. Although many AIE-active fluorescent organic nanoparticles (FONs) have been fabricated recently, the direct linkage of hydrophilic small molecules and hydrophobic AIE dyes has rarely been reported. In this work, we reported a one-pot strategy for preparation of adenosine triphosphate (ATP) containing molecules that conjugated the amino group of ATP and aldehyde-terminated AIE dye (PhCHO) based on mercaptoacetic acid locking imine (MALI) reaction. These AIE-active ATP-PhCHO showed amphiphilic properties and could self-assemble into micelles, which displayed high water dispersibility, strong yellow fluorescence, good biocompatibility and biological imaging capability. These advantages make ATP-PhCHO FONs promising for biomedical applications.

Hydrophobic Carbon Nanodots with Rapid Cell Penetrability and Tunable Photoluminescence Behavior for in Vitro and in Vivo Imaging

Tunable fluorescent emission and applications in both in vitro and in vivo imaging of hydrophobic carbon nanodots (CNDs) with rapid penetration capability are reported. The hydrophobic CNDs are prepared via hydrothermal treatment of ionic liquid 1-ethyl-3-methylimidazolium bromide and exhibit excitation-dependent photoluminescence behavior along with a red-shift in the excitation/emission maxima with concentration. The quantum yields of the as-prepared CNDs are in the range of 2.5-4.8% at an excitation wavelength of 300-600 nm. The rapid penetration behavior (within 1 min) of CNDs into the cell membrane significantly reduces the sample treatment time and avoids potential fluorescence quenching induced by the interaction between CNDs and samples. A co-location study reveals that the hydrophobic CNDs are distributed mainly in the lysosome. The potentials of the hydrophobic CNDs as fluorescent probe in in vitro and in vivo imaging are well demonstrated by the labeling of HeLa cells, MCF-7 cells, A549 cells, and Kunming mice.

Milk-derived multi-fluorescent graphene quantum dot-based cancer theranostic system

An economical green-chemistry approach was used for the synthesis of aqueous soluble graphene quantum dots (GQDs) from cow milk for simultaneous imaging and drug delivery in cancer. The GQDs synthesized using one-pot microwave-assisted heating were multi-fluorescent, spherical in shape having a lateral size of ca. 5nm. The role of processing parameters such as heating time and ionic strength showed a profound effect on photoluminescence properties of GQDs. The GQDs were N-doped and oxygen-rich as confirmed by X-ray photoelectron spectroscopy (XPS) analysis. Cysteamine hydrochloride (Cys) was used to attach an anti-cancer drug berberine hydrochloride (BHC) on GQDs forming GQDs@Cys-BHC complex with c.a. 88% drug loading efficiency. In vitro drug release was studied at the acidic-basic environment and drug kinetics was studied using pharmacokinetic statistical models. The GQDs were biocompatible on L929 cells whereas theranostic GQDs@Cys-BHC complex showed a potent cytotoxic effect on different cancerous cell line models: cervical cancer cell lines such as HeLa cells and breast cancer cells such as MDA-MB-231 confirmed by Trypan blue and MTT-based cytotoxic assays. Furthermore, multi-excitation based cellular bioimaging was demonstrated using confocal laser scanning microscopy (CLSM) and fluorescence microscopy using GQDs as well as GQDs@Cys-BHC complex. Thus, drug delivery (therapeutic) and bioimaging (diagnostic) properties of GQDs@Cys-BHC complex are thought to have a potential in vitro theranostic application in cancer therapy.

Green synthesis of fluorescent hydrophobic carbon quantum dots and their use for 2,4,6-trinitrophenol detection

Fluorescent hydrophobic carbon dots are synthesized in a green way and used for determination of 2,4,6-trinitrophenol in a hydrophobic medium for the first time.

The regulation of hydrophilicity and hydrophobicity of carbon dots via a one-pot approach

The hydrophilicity or hydrophobicity of carbon dots is regulated by varying the H₃PO₄/ethanol molar ratio, via a hydrothermal process with 1-butyl-3-methylimidazolium hexafluorophosphate as the carbon source in a H₃PO₄–ethanol medium.