Nitride coating enhances endothelialization on biomedical NiTi shape memory alloy

Photofunctionalized TiO2-TiN micropattern coating with anticoagulant properties and ECs contact-guidance effect

Titanium nitride (TiN) and titanium dioxide (TiO2) are two titanium-based coatings commonly used in cardiovascular stent surface engineering. Generally, TiN has good mechanical properties and endothelial cell (ECs) compatibility but poor anticoagulant properties and cannot modulate cell growth orientation and morphology. TiO2 has excellent corrosion resistance and biosafety. Besides, TiO2 has the photocatalytic anticoagulant property, which can migrate to other materials tens of microns away. Based on the above properties, a striped TiO2-TiN micropattern coating was designed and fabricated in this study, and the coating was photofunctionalized by UV irradiation. The obtained photo-functionalized TiO2-TiN micropattern coating showed anticoagulant properties by the migrating effect of the photocatalytic anticoagulant property of TiO2. Besides, the TiO2-TiN micropattern coatings showed ECs compatibility. Furthermore, the growth orientation and cell shape of ECs on TiO2-TiN samples were effectively regulated by the stripe pattern's contact guidance effect, which was particularly evident on the photo-functionalized TiO2-TiN samples. We envision that this photofunctionalized TiO2-TiN striped micropattern coating has significant potential for the surface engineering of vascular stents.

Regulation of endothelial functionality through direct and immunomodulatory effects by Ni-Ti-O nanospindles on NiTi alloy

Stent implantation has become one of the most widely used methods for the treatment of cardiovascular diseases. However, endothelial dysfunction and abnormal inflammatory response following implantation may lead to delayed re-endothelialization, resulting in vascular restenosis and stent thrombus. To address the concerns, we constructed nanospindles composed of TiO₂ and Ti₄Ni₂O through hydrothermal treatment of amorphous Ni-Ti-O nanopores anodically grown on NiTi alloy. The results show the treatment can significantly improve hydrophilicity and reduce Ni ion release, essentially independent of hydrothermal duration. The nanospindle surfaces not only promote the expression of endothelial functionality but also activate macrophages to induce a favorable immune response, downregulate pro-inflammatory M1 markers and upregulate pro-healing M2 markers. Moreover, nitric oxide (NO) synthesis, VEGF secretion, and migration of endothelial cells are enhanced after cultured in macrophage conditioned medium. The nanospindles thus are promising as vascular stent coatings to promote re-endothelization.

Enhanced corrosion resistance, antibacterial properties, and biocompatibility by hierarchical hydroxyapatite/ciprofloxacin-calcium phosphate coating on nitrided NiTi alloy

Multi-functional hierarchical coatings are deposited on the nitrided NiTi alloy. The nitrided layer is first deposited by nitrogen plasma immersion ion implantation and a middle layer containing porous hydroxyapatite and ciprofloxacin (Cip) is produced before the top calcium phosphate coating is deposited by the sol-gel method. The thicknesses of the coating and nitrided intermediate layer are about 1.54 μm and 160 nm, respectively and Cip penetrates to a depth of about 530 nm. Calcium phosphate reduces surface defects resulting in a surface roughness of 17 ± 2 nm compared to 34 ± 5 nm of the porous hydroxyapatite coating. The corrosion resistance is improved due to reduced defects and localized corrosion as manifested by the decrease in the Ni²⁺ release rate by 11.6% from 0.0198 to 0.0175 mg L^-1 cm^-2. The bacterial resistance against E. coli is also improved by about 88 times on account of Cip release and good biocompatibility is confirmed by proliferation of MC3T3 cells. This multi-functional hierarchical coating has large potential in orthopedic and dental applications.

Surface modification of electrospun poly-(l-lactic) acid scaffolds by reactive magnetron sputtering

In this study, we modified the surface of bioresorbable electrospun poly-(l-lactic) acid (PLLA) scaffolds by reactive magnetron sputtering of a titanium target under a nitrogen atmosphere. We examined the influence of the plasma treatment time on the structure and properties of electrospun PLLA scaffolds using SEM, XRF, FTIR, XRD, optical goniometry, and mechanical testing. It was observed that the coating formed did not change physicomechanical properties of electrospun PLLA scaffolds and simultaneously, increased their hydrophilicity. No adverse tissue reaction up to 3 months after subcutaneous implantation of the modified scaffolds was detected in in-vivo rat model. The rate of scaffold replacement by the recipient tissue in-vivo was observed to depend on the plasma treatment time.