Preparation, characterization and properties of nano-hydroxyapatite/polypropylene carbonate biocomposite

Poly(Propylene Carbonate)-Based Biodegradable and Environment-Friendly Materials for Biomedical Applications

Poly(propylene carbonate) (PPC) is an emerging "carbon fixation" polymer that holds the potential to become a "biomaterial of choice" in healthcare owing to its good biocompatibility, tunable biodegradability and safe degradation products. However, the commercialization and wide application of PPC as a biomedical material are still hindered by its narrow processing temperature range, poor mechanical properties and hydrophobic nature. Over recent decades, several physical, chemical and biological modifications of PPC have been achieved by introducing biocompatible polymers, inorganic ions or small molecules, which can endow PPC with better cytocompatibility and desirable biodegradability, and thus enable various applications. Indeed, a variety of PPC-based degradable materials have been used in medical applications including medical masks, surgical gowns, drug carriers, wound dressings, implants and scaffolds. In this review, the molecular structure, catalysts for synthesis, properties and modifications of PPC are discussed. Recent biomedical applications of PPC-based biomaterials are highlighted and summarized.

Chemical-physical behavior of Hydroxyapatite: A modeling approach

Hydroxyapatite (HAp) is a ceramic composed of calcium phosphate, frequently employed as a bone substitute material due to its biocompatibility and bioactivity. Over the past century, there has been substantial attention in fields such as orthopedics and plastic surgery. Remarkably, synthetic HAp exhibits properties akin to those found in natural bone and teeth. Computational theoretical chemistry focuses on numerically computing molecular electronic structures and interactions. As chemistry education evolves, it's imperative to acknowledge the increasing significance of computational tools in research. Density Functional Theory (DFT) stands out as the most widely adopted method in contemporary computational chemistry. In this study, we synthesized Hydroxyapatite (HAp) via the double decomposition method using synthetic sources. The synthesized materials underwent thorough characterization, including X-ray Diffraction (XRD), UV-visible spectroscopy, and Fourier Transform Infrared (FTIR) spectroscopy under various conditions. Additionally, we performed quantum mechanical computations on the HAp molecule using density functional theory. Our results were then compared with experimental data. Our experimental findings highlight the successful synthesis of HAp, particularly under specific temperature conditions. Moreover, the quantum chemistry calculations exhibited excellent agreement with the experimental results, especially in terms of spectroscopic characterizations.

Characterization of heavy metals in textile sludge with hydrothermal carbonization treatment

Presence of heavy metals in sludge can severely limit land application due to their bioavailability. The current work studied distribution and risk as well as leaching toxicity of heavy metals in textile sludge treated with hydrothermal carbonization (HTC) at different conditions. Treatment temperature and time can significantly affect characteristics of heavy metals in sludge. For the treatment at 220 °C and 3 h, the content of Cu, Cr, Mn, and Zn existed in form F1 + F2 (water soluble and bound to carbonate and Fe-Mn oxides) dropped by 4.7, 7.1, 8.8, and 7.3%, while the content of Cu, Cr, and Mn in form F4 (bound to quartz, feldspars, etc) increased by 12.9, 19.1, and 10.6%, respectively. This effectively lowered the bioavailability and leaching rate of heavy metals in sludge. Addition of weak alkaline Al(OH)₃ could efficiently force the transformation of F1 to F4, possibly because of the increased pH value of sludge. HTC processing might be an effective way of fixing heavy metals in textile sludge.

A Novel One-Pot Synthesis of Poly(Propylene Carbonate) Containing Cross-Linked Networks by Copolymerization of Carbon Dioxide, Propylene Oxide, Maleic Anhydride, and Furfuryl Glycidyl Ether

The thermoplastic poly(propylene carbonate) (PPC) containing cross-linked networks was one-pot synthesized by copolymerization of carbon dioxide, propylene oxide (PO), maleic anhydride (MA), and furfuryl glycidyl ether (FGE). The copolymers were characterized by Fourier transform infrared spectroscopy (FT-IR), gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) measurements. The thermal and dimensional stability of the copolymers were improved. When the MA and FGE load increased from 1 mol% to 4 mol% of PO, the copolymers contained the gel contents of 11.0%-26.1% and their yields were about double that of the PPC. The 5% weight-loss degradation temperatures (Td,-5%) and the maximum weight-loss degradation temperatures (Td,max) increased from 149.7-271.3 °C and from 282.6-288.6 °C, respectively, corresponding to 217.1 °C and 239.0 °C of PPC. Additionally, the hot-set elongation tests showed that the copolymers exhibited elasticity and dimensional stability with the minimum permanent deformation of 6.5% which was far less than that of PPC of 157.2%, while the tensile strengths were a little lower than that of PPC because of the following two conflicting factors, cross-links and flexibility of the units formed by the introduced third monomers, MA and FGE. In brief, we provide a novel method of one-pot synthesis of PPC containing cross-linked networks. According to this idea, the properties would be more extensively regulated by changing the cross-linkable monomers.

Enhanced Poly(Propylene Carbonate) with Thermoplastic Networks: A One-Pot Synthesis from Carbon Dioxide, Propylene Oxide, and a Carboxylic Dianhydride

Thermally and mechanically enhanced poly(propylene carbonate) (PPC) with networks was prepared by adding a cyclic carboxylic dianhydride, bicyclo(2,2,2)oct-7-ene-2,3,5,6-tetracarboxylic dianhydride (BTCDA), in the CO₂/propylene oxide (PO) copolymerization. The obtained copolymers were characterized by FT-IR, ¹H NMR, DSC, and TGA. The gel, melt flow rate, hot-set elongation, and tensile properties were also measured. The formation of networks was confirmed by the presence of gel and the shape recovery after the hot-set elongation test. The minimum permanent deformation of the copolymer is 3.8% and that of PPC is 4539% higher than this value. The results show that BTCDA units are inserted into the backbone of PPC, and the PPC chains are connected successfully owing to cyclic multifunctional anhydride groups in BTCDA. With increasing feed molar ratio of BTCDA to PO from 1 to 4%, the yield strength of copolymers increases from 18.1 to 37.4 MPa compared to 12.9 MPa of PPC. The 5% weight-loss degradation temperatures and maximum weight-loss degradation temperatures greatly increase up to 276.4 and 294.7 °C, respectively, which are 58.6 °C and 55.1 °C higher than those of PPC. These enhanced properties originate from the formation of crosslinks by the rigid and bulky multifunctional dianhydride.

Synthesis of hydroxyapatite for biomedical applications

The current need for long lasting implants and bone substitutes characterized by biocompatibility, bioactivity and mechanical properties, without the immune rejection is a great challenge for scientists. These bone substitute structures should be prepared for individual patients with all details controlled on the micrometer level. Similarly, nontoxic, biocompatible targeted drug delivery systems which allow controlling the rate and time period of the drug delivery and simultaneously eliminating toxic and side effects on the healthy tissues, are of great interest. Extensive attempts have been made to develop a simple, efficient, and green method to form biofunctional scaffolds and implant coatings possessing the above mentioned significant biocompatibility, bioactivity and mechanical strength. Moreover, that could also serve as drug delivery systems. Hydroxyapatite (HA) which is a major mineral component of vertebrate bones and teeth is an excellent material for these purposes. In this literature review the biologically inspired scaffolds, bone substitutes, implants characterized by mechanical strength and biocompatibility, as well the drug delivery systems, based on hydroxyapatite are discussed.

Effect of high energy electron beam (10MeV) on specific heat capacity of low-density polyethylene/hydroxyapatite nano-composite

In the present work, thermal properties of low density polyethylene (LDPE) and its nano composites are investigated. For this purpose LDPE reinforced with different weight percents of hydroxyapatite (HAP) powder which was synthesized via hydrolysis method are produced. The samples were irradiated with 10MeV electron beam at doses of 75 to 250kGy. Specific heat capacity measurement have been carried out at different temperatures, i.e. 25, 50, 75 and 100°C using modulated temperature differential scanning calorimetry (MTDSC) apparatus and the effect of three parameters include of temperature, irradiation dose and the amount of HAP nano particles as additives on the specific heat capacity of PE/HAP have been investigated precisely. The MTDSC results indicate that the specific heat capacity have decreased by addition of nano sized HAP as reinforcement for LDPE. On the other hand, the effect of radiation dose is reduction in the specific heat capacity in all materials including LDPE and its nano composites. The HAP nano particles along with cross-link junctions due to radiation restrain the movement of the polymer chains in the vicinity of each particle and improve the immobility of polymer chains and consequently lead to reduction in specific heat capacity. Also, the obtained results confirm that the radiation effect on the specific heat capacity is more efficient than the reinforcing effect of nano-sized hydroxyapatite.

Evaluation of the osteoconductive potential of poly(propylene carbonate)/nano-hydroxyapatite composites mimicking the osteogenic niche for bone augmentation

Nano-hydroxyapatite (n-HA) reinforced poly(propylene carbonate) (PPC) composites were prepared for bone repair and reconstruction. The effects of reinforcement on the morphology, mechanical properties and biological performance of n-HA/PPC composites were investigated. The surface morphology and mechanical properties of the composites were characterized by scanning electron microscopy (SEM) and universal material testing machine. The analytical data showed that good incorporation and dispersion of n-HA crystals could be obtained in the PPC matrix at a 30:70 weight ratio. With the increase of n-HA content, the tensile strength increased and the fracture elongation rate decreased. In vitro cell culture revealed that the composite was favorable template for cell attachment and growth. In vivo implantation in femoral condyle defects of rabbits confirmed that the n-HA/PPC composite had good biocompatibility and gradual biodegradability, exhibiting good performance in guided bone regeneration. The results demonstrates that the incorporation of n-HA crystals into PPC matrix provides a practical way to produce biodegradable and cost-competitive composites mimicking the osteogenic niche for bone augmentation.