Mussel-inspired alginate gel promoting the osteogenic differentiation of mesenchymal stem cells and anti-infection

Mild Thermotherapy-Assisted GelMA/HA/MPDA@Roxadustat 3D-Printed Scaffolds with Combined Angiogenesis-Osteogenesis Functions for Bone Regeneration

Early reconstruction of the vascular network is a prerequisite to the effective treatment of substantial bone defects. Traditional 3D printed tissue engineering scaffolds designed to repair large bone defects do not effectively regenerate the vascular network, and rely only on the porous structure within the scaffold for nutrient transfer and metabolic waste removal. This leads to delayed bone restoration and hence functional recovery. Therefore, strategies for generation scaffolds with the capacity to efficiently regenerate vascularization should be developed. This study loads roxarestat (RD), which can stabilize HIF-1α expression in a normoxic environment, onto the mesopore polydopamine nanoparticles (MPDA@RD) to enhance the reconstruction of vascular network in large bone defects. Subsequently, MPDA@RD is mixed with GelMA/HA hydrogel bioink to fabricate a multifunctional hydrogel scaffold (GHM@RD) through 3D printing. In vitro results show that the GHM@RD scaffolds achieve good angiogenic-osteogenic coupling by activating the PI3K/AKT/HSP90 pathway in BMSCs and the PI3K/AKT/HIF-1α pathway in HUVECs under mild thermotherapy. In vivo experiments reveal that RD and mild hyperthermia synergistically induce early vascularization and bone regeneration of critical bone defects. In conclusion, the designed GHM@RD drug delivery scaffold with mild hyperthermia holds great therapeutic value for future treatment of large bone defects.

Polydopamine modified multifunctional carboxymethyl chitosan/pectin hydrogel loaded with recombinant human epidermal growth factor for diabetic wound healing

The development of a multifunctional wound dressing that can adapt to the shape of wounds and provide controlled drug release is crucial for diabetic patients. This study developed a carboxymethyl chitosan-based hydrogel dressing with enhanced mechanical properties and tissue adherence that were achieved by incorporating pectin (PE) and polydopamine (PDA) and loading the hydrogel with recombinant human epidermal growth factor (rhEGF). This EGF@PDA-CMCS-PE hydrogel demonstrated robust tissue adhesion, enhanced mechanical properties, and superior water retention and vapor permeability. It also exhibited significant antioxidant capacity. The results showed that EGF@PDA-CMCS-PE could effectively scavenge 2,2'-Azinobis-(3-ethylbenzthiazoline-6-sulphonate)， (1,1-diphenyl-2-picrylhydrazyl), and superoxide anions and increase superoxide dismutase and catalase levels in vivo. In vitro cytotoxicity and antibacterial assays showed good biocompatibility and antimicrobial properties. The sustained release of EGF by the hydrogel was confirmed, with a gradual release profile over 120 h. In vivo studies in diabetic mice showed that the hydrogel significantly accelerated wound healing, with a wound contraction rate of 97.84% by day 14. Histopathological analysis revealed that the hydrogel promoted fibroblast proliferation, neovascularization, and orderly connective tissue formation, leading to a more uniform and compact wound-healing process. Thus, EGF@PDA-CMCS-PE hydrogel presents a promising tool for managing chronic diabetic wounds, offering a valuable strategy for future clinical applications.

Antimicrobial peptide immobilization on catechol-functionalized PCL/alginate wet-spun fibers to combat surgical site infection

Surgical site infection (SSI) caused by pathogenic bacteria leads to delayed wound healing and extended hospitalization. Inappropriate uses of antibiotics have caused a surge in SSI and common antibiotics are proving to be ineffective against SSI. Antimicrobial peptides (AMPs) can be a potential solution to prevent SSI because of their broad spectrum of antimicrobial activities. In this study, naturally sourced AMPs were studied along with microfibers, fabricated by a novel wet-spinning method using sodium alginate and polycaprolactone. Afterward, fibers were functionalized by the catechol groups of dopamine immobilizing nucleophilic AMPs on the surface. Conjugation between PCL and alginate resulted in fibers with smooth surfaces improving their mechanical strength via hydrogen bonds. Having an average diameter of 220 μm, the mechanical properties of the fiber complied with USP standards for suture size 3-0. Engineered microfibers were able to hinder the growth of Proteus spp., a pathogenic bacterium for at least 60 hours whereas antibiotic ceftazidime failed. When subjected to a linear incisional wound model study, accelerated healing was observed when the wound was closed using the engineered fiber compared to Vicryl. The microfibers promoted faster re-epithelialization compared to Vicryl proving their higher wound healing capacity.

Bioactive Self-Regulated Liquified Microcompartments to Bioengineer Bone-Like Microtissues

Designing a microenvironment that drives autonomous stromal cell differentiation toward osteogenesis while recapitulating the complexity of bone tissue remains challenging. In the current study, bone-like microtissues are created using electrohydrodynamic atomization to form two distinct liquefied microcapsules (mCAPs): i) hydroxypyridinone (HOPO)-modified gelatin (GH mCAPs, 7.5% w/v), and ii) HOPO-modified gelatin and dopamine-modified gelatin (GH+GD mCAPs, 7.5%+1.5% w/v). The ability of HOPO to coordinate with iron ions at physiological pH allows the formation of a semipermeable micro-hydrogel shell. In turn, the dopamine affinity for calcium ions sets a bioactive milieu for bone-like microtissues. After 21 days post encapsulation, GH and GH+GD mCAPs potentiate autonomous osteogenic differentiation of mesenchymal stem cells accompanied by collagen type-I gene upregulation, increased alkaline phosphatase (ALP) expression, and formation of mineralized extracellular matrix. However, the GH+GD mCAPs show higher levels of osteogenic markers starting on day 14, translating into a more advanced and organized mineralized matrix. The GH+GD system also shows upregulation of the receptor activator of nuclear factor kappa-B ligand (RANK-L) gene, enabling the autonomous osteoclastic differentiation of monocytes. These catechol-based mCAPs offer a promising approach to designing multifunctional and autonomous bone-like microtissues to study in vitro bone-related processes at the cell-tissue interface, angiogenesis, and osteoclastogenesis.

Antimicrobial Hydrogels: Potential Materials for Medical Application

Microbial infections based on drug-resistant pathogenic organisms following surgery or trauma and uncontrolled bleeding are the main causes of increased mortality from trauma worldwide. The prevalence of drug-resistant pathogens has led to a significant increase in medical costs and poses a great threat to the normal life of people. This is an important issue in the field of biomedicine, and the emergence of new antimicrobial materials hydrogels holds great promise for solving this problem. Hydrogel is an important material with good biocompatibility, water absorption, oxygen permeability, adhesion, degradation, self-healing, corrosion resistance, and controlled release of drugs as well as structural diversity. Bacteria-disturbing hydrogels have important applications in the direction of surgical treatment, wound dressing, medical device coating, and tissue engineering. This paper reviews the classification of antimicrobial hydrogels, the current status of research, and the potential of antimicrobial hydrogels for one application in biomedicine, and analyzes the current research of hydrogels in biomedical applications from five aspects: metal-loaded hydrogels, drug-loaded hydrogels, carbon-material-loaded hydrogels, hydrogels with fixed antimicrobial activity and biological antimicrobial hydrogels, and provides an outlook on the high antimicrobial activity, biodegradability, biocompatibility, injectability, clinical applicability and future development prospects of hydrogels in this field.

Polysaccharides, proteins, and synthetic polymers based multimodal hydrogels for various biomedical applications: A review

Nature-derived or biologically encouraged hydrogels have attracted considerable interest in numerous biomedical applications owing to their multidimensional utility and effectiveness. The internal architecture of a hydrogel network, the chemistry of the raw materials involved, interaction across the interface of counter ions, and the ability to mimic the extracellular matrix (ECM) govern the clinical efficacy of the designed hydrogels. This review focuses on the mechanistic viewpoint of different biologically driven/inspired biomacromolecules that encourages the architectural development of hydrogel networks. In addition, the advantage of hydrogels by mimicking the ECM and the significance of the raw material selection as an indicator of bioinertness is deeply elaborated in the review. Furthermore, the article reviews and describes the application of polysaccharides, proteins, and synthetic polymer-based multimodal hydrogels inspired by or derived from nature in different biomedical areas. The review discusses the challenges and opportunities in biomaterials along with future prospects in terms of their applications in biodevices or functional components for human health issues. This review provides information on the strategy and inspiration from nature that can be used to develop a link between multimodal hydrogels as the main frame and its utility in biomedical applications as the primary target.

Mussel-Inspired Tantalum Nanocomposite Hydrogels for In Situ Oral Cancer Treatment

Oral squamous cell carcinoma (OSCC) is one of the most common oral malignancies. Radiotherapy is the primary noninvasive treatment of OSCC for avoiding surgery-induced facial deformities and impaired oral function. However, the specificity of in situ OSCC limits radiotherapeutic effects because of the hypoxia-induced low radiosensitivity of tumors and the low radiation tolerance of surrounding normal tissues. Here, we design a highly efficient and low-toxic radiosensitization strategy. On the one hand, biocompatible poly(vinyl pyrrolidone)-modified tantalum nanoparticles (Ta@PVP NPs) not only have strong X-ray deposition capability to upregulate oxidative stress but also have photothermal conversion efficiency to improve hypoxia for tumor radiosensitivity. On the other hand, to optimize the spatial distribution of Ta@PVP NPs within tumors, mussel-inspired catechol with bioadhesive properties is grafted on tumor microenvironment-responsive sodium alginate (DAA) to form in situ hydrogels for precision radiotherapy. On this basis, we find that Ta@PVP-DAA hydrogels effectively inhibit OSCC development in mice under photothermal-assisted radiotherapy without facial deformities and damage to surrounding normal tissues. Overall, our work not only promotes the exploration of Ta@PVP NPs as new radiosensitizers for OSCC but also develops a nanocomposite hydrogel system strategy as a promising paradigm for the precision treatment of orthotopic tumors.

Implantable biomedical materials for treatment of bone infection

The treatment of bone infections has always been difficult. The emergence of drug-resistant bacteria has led to a steady decline in the effectiveness of antibiotics. It is also especially important to fight bacterial infections while repairing bone defects and cleaning up dead bacteria to prevent biofilm formation. The development of biomedical materials has provided us with a research direction to address this issue. We aimed to review the current literature, and have summarized multifunctional antimicrobial materials that have long-lasting antimicrobial capabilities that promote angiogenesis, bone production, or "killing and releasing." This review provides a comprehensive summary of the use of biomedical materials in the treatment of bone infections and a reference thereof, as well as encouragement to perform further research in this field.

Bridging wounds: tissue adhesives' essential mechanisms, synthesis and characterization, bioinspired adhesives and future perspectives

Bioadhesives act as a bridge in wound closure by forming an effective interface to protect against liquid and gas leakage and aid the stoppage of bleeding. To their credit, tissue adhesives have made an indelible impact on almost all wound-related surgeries. Their unique properties include minimal damage to tissues, low chance of infection, ease of use and short wound-closure time. In contrast, classic closures, like suturing and stapling, exhibit potential additional complications with long operation times and undesirable inflammatory responses. Although tremendous progress has been made in the development of tissue adhesives, they are not yet ideal. Therefore, highlighting and summarizing existing adhesive designs and synthesis, and comparing the different products will contribute to future development. This review first provides a summary of current commercial traditional tissue adhesives. Then, based on adhesion interaction mechanisms, the tissue adhesives are categorized into three main types: adhesive patches that bind molecularly with tissue, tissue-stitching adhesives based on pre-polymer or precursor solutions, and bioinspired or biomimetic tissue adhesives. Their specific adhesion mechanisms, properties and related applications are discussed. The adhesion mechanisms of commercial traditional adhesives as well as their limitations and shortcomings are also reviewed. Finally, we also discuss the future perspectives of tissue adhesives.

Self-Adhesive Hydrogel Biomimetic Periosteum to Promote Critical-Size Bone Defect Repair via Synergistic Osteogenesis and Angiogenesis

The periosteum plays an important role in the regeneration of critical-size bone defects, with functions of recruiting multiple cells, accelerating vascular network reconstruction, and guiding bone tissue regeneration. However, these functions cannot be easily implemented by simply simulating the periosteum via a material structure design or by loading exogenous cytokines. Herein, inspired by the periosteal function, we propose a biomimetic periosteum preparation strategy to enhance natural polymer hydrogel membranes using inorganic bioactive materials. The biomimetic periosteum having bone tissue self-adhesive functions and resembling an extracellular matrix was prepared using dopamine-modified gelatin and oxidized hyaluronan (GA/HA), and micro/nanobioactive glass (MNBG) was further incorporated into the hydrogel to fabricate an organic/inorganic co-crosslinked hydrogel membrane (GA/HA-BG). The addition of MNBG enhanced the stability of the natural polymer hydrogel membrane, resulting in a sustained degradation time, biomineralization, and long-term release of ions. The Ca²⁺ and SiO₄^4- ions released by bioactive glass were shown to recruit cells and promote the differentiation of bone marrow stromal cells into osteoblasts, initiating multicentric osteogenic behavior. Additionally, the bioactive ions were able to continuously stimulate the endogenous expression of vascular endothelial growth factor from human umbilical vein endothelial cells through the PI3K/Akt/HIF-1α pathway, which accelerated vascularization of the defect area and synergistically promoted the repair of bone defects. This organic-inorganic biomimetic periosteum has been proved to be effective and versatile in critical-size bone defect repair and is expected to provide a promising strategy for solving clinical issues.

Facile anchoring mussel adhesive mimic tentacles on biodegradable polymer cargo carriers via self-assembly for microplastic-free cosmetics

Enhancing the deposition of fragrance delivery systems contained in personal care products on target surfaces is crucial for increasing the longevity of scent, efficiently utilizing expensive functional compounds and limiting the generation of microplastics in domestic waste water. In this work, we designed and synthesized a new type of biomimetic macromolecules, chitosan-graft-L-lysine-L-DOPA (C-L-D), as a versatile biodegradable adhesion promoter to facilitate the deposition of biodegradable fragrance carriers on diverse surfaces including hair, cotton and skin. The C-L-D has hyperbranched chain architecture with many oligopeptide adhesive tentacles, each being a simple mimic of mussel adhesive proteins. It also exhibits unique amphiphilic characteristic. As a result, it could be facilely anchored on cargo-loaded poly(lactic-co-glycolic acid) nanoparticle surface via self-assembly in the particle preparation process. The C-L-D-modified nanoparticles show significantly higher deposition efficiencies than polyvinyl alcohol- and chitosan-coated particles when deposited on the target surfaces in different aqueous media as the lysine and DOPA units are capable of providing multi-noncovalent interactions, including electrostatic, polar, hydrophobic interactions, and bidentate hydrogen bonds, with the target surfaces, and possibly also inducing oxidative cross-linking. A much higher retention rate of the C-L-D-modified nanoparticles on cotton surface is also observed after washing with a soap solution, which could be attributed to the significant role played by bidentate hydrogen bonds. These findings suggest that C-L-D is a versatile biodegradable adhesion promoter and has the potential to be applied for various personal care applications and beyond.

3D-Printed Coaxial Hydrogel Patches with Mussel-Inspired Elements for Prolonged Release of Gemcitabine

With the aim of fabricating drug-loaded implantable patches, a 3D printing technique was employed to produce novel coaxial hydrogel patches. The core-section of these patches contained a dopamine-modified methacrylated alginate hydrogel loaded with a chemotherapeutic drug (Gemcitabine), while their shell section was solely comprised of a methacrylated alginate hydrogel. Subsequently, these patches were further modified with CaCO3 cross linker and a polylactic acid (PLA) coating to facilitate prolonged release of the drug. Consequently, the results showed that addition of CaCO3 to the formula enhanced the mechanical properties of the patches and significantly reduced their swelling ratio as compared to that for patches without CaCO3. Furthermore, addition of PLA coating to CaCO3-containing patches has further reduced their swelling ratio, which then significantly slowed down the release of Gemcitabine, to a point where 4-layered patches could release the drug over a period of 7 days in vitro. Remarkably, it was shown that 3-layered and 4-layered Gemcitabine loaded patches were successful in inhibiting pancreatic cancer cell growth for a period of 14 days when tested in vitro. Lastly, in vivo experiments showed that gemcitabine-loaded 4-layered patches were capable of reducing the tumor growth rate and caused no severe toxicity when tested in mice. Altogether, 3D printed hydrogel patches might be used as biocompatible implants for local delivery of drugs to diseased site, to either shrink the tumor or to prevent the tumor recurrence after resection.

Recent developments in mussel-inspired materials for biomedical applications

Over the decades, researchers have strived to synthesize and modify nature-inspired biomaterials, with the primary aim to address the challenges of designing functional biomaterials for regenerative medicine and tissue engineering. Among these challenges, biocompatibility and cellular interactions have been extensively investigated. Some of the most desirable characteristics for biomaterials in these applications are the loading of bioactive molecules, strong adhesion to moist areas, improvement of cellular adhesion, and self-healing properties. Mussel-inspired biomaterials have received growing interest mainly due to the changes in mechanical and biological functions of the scaffold due to catechol modification. Here, we summarize the chemical and biological principles and the latest advancements in production, as well as the use of mussel-inspired biomaterials. Our main focus is the polydopamine coating, the conjugation of catechol with other polymers, and the biomedical applications that polydopamine moieties are used for, such as matrices for drug delivery, tissue regeneration, and hemostatic control. We also present a critical conclusion and an inspired view on the prospects for the development and application of mussel-inspired materials.

Marine Polysaccharides for Wound Dressings Application: An Overview

Wound dressings have become a crucial treatment for wound healing due to their convenience, low cost, and prolonged wound management. As cutting-edge biomaterials, marine polysaccharides are divided from most marine organisms. It possesses various bioactivities, which allowing them to be processed into various forms of wound dressings. Therefore, a comprehensive understanding of the application of marine polysaccharides in wound dressings is particularly important for the studies of wound therapy. In this review, we first introduce the wound healing process and describe the characteristics of modern commonly used dressings. Then, the properties of various marine polysaccharides and their application in wound dressing development are outlined. Finally, strategies for developing and enhancing marine polysaccharide wound dressings are described, and an outlook of these dressings is given. The diverse bioactivities of marine polysaccharides including antibacterial, anti-inflammatory, haemostatic properties, etc., providing excellent wound management and accelerate wound healing. Meanwhile, these biomaterials have higher biocompatibility and biodegradability compared to synthetic ones. On the other hand, marine polysaccharides can be combined with copolymers and active substances to prepare various forms of dressings. Among them, emerging types of dressings such as nanofibers, smart hydrogels and injectable hydrogels are at the research frontier of their development. Therefore, marine polysaccharides are essential materials in wound dressings fabrication and have a promising future.

Dopamine-Modified Alginate Hydrogel with Effectiveness and Safety for Preoperative Localization of Lung Nodules

It is important to mark an early lung tumor manifested with small nodules during computed tomography-guided and minimally invasive surgery. The aim of this study is to develop an injectable hydrogel for clinical lung nodule localization. Dopamine, a typical catechol-containing compound, was used to modify alginate for better gel formation and performance needed for localization application. Through the addition of an adequate oxidant and catalase, the catechol-conjugated alginate (C-ALG) hydrogel showed rapid gelation for less than 5 min, similar mechanical properties to lung tissue, slight swelling degree, good cell compatibility, and enough tissue adhesion for localization around the lung tissue. In addition, the C-ALG hydrogel increased the bursting pressure of lung tissue up to 266 ± 15-385 ± 13 mm-H₂O that could prevent hydrogel rupture and migration during localizing surgery, suggesting the injectable hydrogel with effectiveness and safety for clinical applications.

Prosthetic meshes for hernia repair: State of art, classification, biomaterials, antimicrobial approaches, and fabrication methods

Worldwide, hernia repair represents one of the most frequent surgical procedures encompassing a global market valued at several billion dollars. This type of surgery usually requires the implantation of a mesh that needs the appropriate chemical, physical and biological properties for the type of repair. This review thus presents a description of the types of hernias, current hernia repair methods, and the state of the art of prosthetic meshes for hernia repair providing the most important meshes used in clinical practice by surgeons working in this area classified according to their biological or chemical nature, morphology and whether bioabsorbable or not. We emphasise the importance of surgical site infection in herniatology, how to deal with this microbial problem, and we go further into the future research lines on the production of advanced antimicrobial meshes to improve hernia repair and prevent microbial infections, including multidrug-resistant strains. A great deal of progress has been made in this biomedical field in the last decade. However, we are still far from an ideal antimicrobial mesh that can also provide excellent integration to the abdominal wall, mechanical performance, low visceral adhesion and minimal inflammatory or foreign body reactions, among many other problems.

Dopamine-Functionalized Gellan Gum Hydrogel as a Candidate Biomaterial for a Retinal Pigment Epithelium Cell Delivery System

In this study, dopamine-functionalized gellan gum (DFG) hydrogel was prepared as a carrier for retinal pigment epithelium (RPE) cell delivery via a carbodiimide reaction. The carboxylic acid of gellan gum (GG) was replaced with catechol in a 21.3% yield, which was confirmed by NMR. Sol fraction and weight loss measurements revealed that dopamine improved degradability in the GG hydrogel. Measurements of the viscosity, injection force, and compressibility also showed that dopamine-functionalized GG hydrogels had more desirable rheological/mechanical properties for improving injectability. These characteristics were confirmed to arise from the GG's helix structure loosened by the dopamine's bulky nature. Moreover, dopamine's hydrophilic characteristics were confirmed to create a more favorable microenvironment for cell growth by promoting swelling capability and cell attachment. This improved biocompatibility became more pronounced when the hydrophilicity of dopamine was combined with a larger specific surface area stemming from the less porous structure of the dopamine-grafted hydrogels. This effect was apparent from the live/dead staining images of the as-prepared hydrogels. Meanwhile, the nonionic cross-linked DFG (DG) hydrogel showed the lowest protein expression in the immunofluorescence staining images obtained after 28 days of culture, supporting that it had the highest degradability and associated cell-releasing ability. That tendency was also observed in the gene expression data acquired by real-time polymerase chain reaction (RT-PCR) analysis. RT-PCR analysis also revealed that the DG hydrogel carrier could upregulate the visual function-related gene of RPE. Overall, the DG hydrogel system demonstrated its feasibility as a carrier of RPE cells and its potential as a means of improving visual function.

Preparation of high-strength and high-toughness biomass medical films based on a polydopamine dynamically united calcium alginate/carboxymethyl chitosan dual network

A high-strength and high-toughness biomass medical film was prepared using a polydopamine dynamically united calcium alginate/carboxymethyl chitosan dual network.

One-pot, self-catalyzed synthesis of self-adherent hydrogels for photo-thermal, antimicrobial wound treatment

Self-adhering hydrogels are promising materials to be employed as wound dressings, because they can be used for wound healing without the necessity of additional stitching. However, micro-organisms can easily adhere to these hydrogels as well, which usually causes wound infections. Therefore, adhesive hydrogels are often combined with antibiotics. However, this introduces a risk of drug resistance, cytotoxicity and poor cell affinity. Consequently, recently, there has been great interest in developing non-antibiotic, antibacterial adhesive hydrogels. In this article, we present a simple one-pot synthesis procedure to prepare self-adhesive hydrogels composed of poly(acrylamide) (PAM), naturally derived chitosan (CS) and tannic acid/ferric ion chelates (TA@Fe³⁺). TA@Fe³⁺ enables self-catalysis of the polymerization reaction. In addition, due to its near infrared (NIR) photothermal responsiveness, TA@Fe³⁺ allows for eliminating the bacterial activity with up to 91.6% and 94.7% effectivity against Escherichia coli and Staphylococcus aureus, respectively. Mechanical and adhesion testing shows that the hydrogels are tough as well as flexible and will adhere repeatedly to many types of biological tissues, which can be attributed to the combination of physical and chemical bonding between TA@Fe³⁺ and PAM and CS, respectively. Moreover, in vitro and in vivo tests indicate that the NIR photothermally active hydrogel can effectively prevent bacterial infection and accelerate tissue regeneration, which demonstrates that these hydrogels are promising functional materials for wound healing applications.

Dopamine-functionalized hyaluronic acid microspheres for effective capture of CD44-overexpressing circulating tumor cells

As one of the biomarkers of liquid biopsy, circulating tumor cells (CTCs) provides important clinical information for cancer diagnosis. However, accurate separation and identification of CTCs remains a great deal of challenge. In present work, we developed novel dopamine-functionalized hyaluronic acid microspheres (HA-DA microspheres) to capture CD44-overexpressing CTCs. The dopamine was grafted onto the hyaluronic acid chain, which was polymerized and cross-linked by oxidation of the catechol groups. Afterwards, a facile microfluidic chip was designed and developed to fabricate the HA-DA microspheres with a diameter of about 45 μm. Our results showed that the CD44+ cells (i.e., HeLa, HepG2, A549, MCF-7 and DU-145 cells) could be selectively captured. Then a double-layer microfluidic filter (DLMF) was fabricated for dynamic isolation and detection of CTCs in blood samples. Many slit openings with 15 μm in height were designed to allow white blood cells to clear away, while the microspheres with CTCs were intercepted in the DLMF, which achieved effective separation of CTCs from blood cells. The approach exhibited high capture efficiency even at the cell density as low as 10 cells/mL. We believe the DLMF integrated with HA-DA microspheres could be a promising approach for isolation and detection of CD44-overexpressing CTCs, which is useful for prognosis and early metastasis of cancer patients.

Combination of Polypropylene Mesh and in Situ Injectable Mussel-Inspired Hydrogel in Laparoscopic Hernia Repair for Preventing Post-Surgical Adhesions in the Piglet Model

Polypropylene (PP) mesh has been used successfully for a long time in clinical practice as an impressive prosthesis for ventral hernia repair. To utilize a physical barrier for separating mesh from viscera is a general approach for preventing adhesions in clinical practice. However, a serious abdominal adhesion between the mesh and viscera can possibly occur post-hernia, especially with the small intestine; this can lead to a series of complications, such as chronic pain, intestinal obstruction, and fistula. Thus, determining how to prevent abdominal adhesions between the mesh and viscera is still an urgent clinical problem. In this study, a dopamine-functionalized polysaccharide derivative (oxidized-carboxymethylcellulose-g-dopamine, OCMC-DA) was synthesized; this was blended with carboxymethylchitosan (CMCS) to form a hydrogel (OCMC-DA/CMCS) in situ at the appropriate time. The physical and chemical properties of the hydrogel were characterized successfully, and its excellent biocompatibility was presented by the in vitro cell test. The combination of this hydrogel and PP mesh was used in laparoscopic surgery for repairing the abdominal wall defect, where the hydrogel could become fixed in situ on the PP mesh to form an anti-adhesion gel-mesh. The results showed that the gel-mesh could prevent abdominal adhesions effectively in the piglet model. Moreover, the histology and immunohistochemical staining proved that the gel-mesh could effectively alleviate the inflammation reaction and deposition of collagen around the mesh, and it did not disturb the integration between mesh and abdominal wall. Thus, the gel-mesh has superior tissue compatibility.

An overview of advanced biocompatible and biomimetic materials for creation of replacement structures in the musculoskeletal systems: focusing on cartilage tissue engineering

Tissue engineering, as an interdisciplinary approach, is seeking to create tissues with optimal performance for clinical applications. Various factors, including cells, biomaterials, cell or tissue culture conditions and signaling molecules such as growth factors, play a vital role in the engineering of tissues. In vivo microenvironment of cells imposes complex and specific stimuli on the cells, and has a direct effect on cellular behavior, including proliferation, differentiation and extracellular matrix (ECM) assembly. Therefore, to create appropriate tissues, the conditions of the natural environment around the cells should be well imitated. Therefore, researchers are trying to develop biomimetic scaffolds that can produce appropriate cellular responses. To achieve this, we need to know enough about biomimetic materials. Scaffolds made of biomaterials in musculoskeletal tissue engineering should also be multifunctional in order to be able to function better in mechanical properties, cell signaling and cell adhesion. Multiple combinations of different biomaterials are used to improve above-mentioned properties of various biomaterials and to better imitate the natural features of musculoskeletal tissue in the culture medium. These improvements ultimately lead to the creation of replacement structures in the musculoskeletal system, which are closer to natural tissues in terms of appearance and function. The present review article is focused on biocompatible and biomimetic materials, which are used in musculoskeletal tissue engineering, in particular, cartilage tissue engineering.

Mussel-Inspired Catechol-Functionalized Hydrogels and Their Medical Applications

Mussel adhesive proteins (MAPs) have a unique ability to firmly adhere to different surfaces in aqueous environments via the special amino acid, 3,4-dihydroxyphenylalanine (DOPA). The catechol groups in DOPA are a key group for adhesive proteins, which is highly informative for the biomedical domain. By simulating MAPs, medical products can be developed for tissue adhesion, drug delivery, and wound healing. Hydrogel is a common formulation that is highly adaptable to numerous medical applications. Based on a discussion of the adhesion mechanism of MAPs, this paper reviews the formation and adhesion mechanism of catechol-functionalized hydrogels, types of hydrogels and main factors affecting adhesion, and medical applications of hydrogels, and future the development of catechol-functionalized hydrogels.

3D printing of hydrogel scaffolds for future application in photothermal therapy of breast cancer and tissue repair

Surgical removal remains the main clinical approach to treat breast cancer, although risks including high local recurrence of cancer and loss of breast tissues are the threats for the survival and quality of life of patients after surgery. In this study, bifunctional scaffold based on dopamine-modified alginate and polydopamine (PDA) was fabricated using 3D printing with an aim to treat breast cancer and fill the cavity, thereby achieving tissue repair. The as-prepared alginate-polydopamine (Alg-PDA) scaffold exhibited favorable photothermal effect both in vitro and in vivo upon 808 nm laser irradiation. Further, the Alg-PDA scaffold showed great flexibility and similar modulus with normal breast tissues and facilitated the adhesion and proliferation of normal breast epithelial cells. Moreover, the in vivo performance of the Alg-PDA scaffold could be tracked by magnetic resonance and photoacoustic dual-modality imaging. The scaffold that was fabricated using simple and biocompatible materials with individual-designed structure and macropores, as well as outstanding photothermal effect and enhanced cell proliferation ability, might be a potential option for breast cancer treatment and tissue repair after surgery. STATEMENT OF SIGNIFICANCE: In this study, a three-dimensional porous scaffold was developed using 3D printing for the treatment of local recurrence of breast cancer and the following tissue repair after surgery. In this approach, easily available materials (dopamine-modified alginate and PDA) with excellent biocompatibility were selected and prepared as printing inks. The fabricated scaffold showed effective photothermal effects for cancer therapy, as well as matched mechanical properties with breast tissues. Furthermore, the scaffold supported attachment and proliferation of normal breast cells, which indicates its potential ability for adipose tissue repair. Together, the 3D-printed scaffold might be a promising option for the treatment of locally recurrent breast cancer cells and the following tissue repair after surgery.

Polydopamine-assisted surface modification for orthopaedic implants

Along with the massive use of implants in orthopaedic surgeries in recent few decades, there has been a tremendous demand for the surface modification of the implants to avoid surgery failure and improve their function. Polydopamine (PDA), being able to adhere to almost all kinds of substrates and possessing copious functional groups for covalently immobilizing biomolecules and anchoring metal ions, has been widely used for surface modification of materials since its discovery in the last decade. PDA and its derivatives can be used for the surface modification of orthopaedic implants to modulate cellular responses, including cell spreading, migration, proliferation, and differentiation, and may thereby enhance the function of existing implants. In addition, the osseointegration and antimicrobial properties of orthopaedic implants may also be improved by PDA-based coatings. The aim of this review is to provide a brief overview of current advances of surface modification technologies for orthopaedic implants using PDA and its derivatives as a medium. Given the versatility of PDA-based adhesion, such PDA-assisted surface modification technologies will certainly benefit the development of new orthopaedic implants.

THE TRANSLATIONAL POTENTIAL OF THIS ARTICLE

Surface treatments of orthopaedic implants, which are normally inert materials, are essential for their performance in vivo. This review summarizes recent advances in the surface modification of orthopaedic implants using facile and highly versatile techniques based on the use of polydopamine (PDA) and its derivatives.

Do Nano-crystalline Silver-Coated Hernia Grafts Reduce Infection?

PURPOSE

Inguinal hernia repairs are the most common interventions in adults in general surgery clinics. Depending on the type of mesh and repair, the incidence of mesh-related infection ranges from 0.6 to 8%. Methicillin-resistant Staphylococcus aureus is the most common microorganism causing graft infection. The aim of this study was to investigate the efficacy of nano-crystalline silver-coated polypropylene grafts against graft infection created with MRSA in rats.

METHODS

A total of 60 female, Wistar albino rats were used in the study. Polypropylene grafts 1 × 1 cm in size were coated in silver ion-doped, calcium phosphate-based, antibacterial ceramic powder (NS-coated graft) to provide an antimicrobial effect. The MRSA seeding procedure was applied at the same time as surgery. In Group 1, normal graft was applied without MRSA seeding, in Group 2, normal graft with MRSA seeding, in Group 3, NS-coated graft without MRSA seeding, and in Group 4, NS-coated graft with MRSA seeding. For the groups which were to be infected, the bacteria were seeded in the surgical area during the operation. On the 7th day postoperatively, all the animals were killed. The grafts were removed and one from each group was examined under electron microscope and the others were implanted in culture medium and the number of colonies was counted after 24 h.

RESULTS

In Groups 1 and 3, the incision site was seen to have healed on day 3, no clinical surgical area infection was seen during follow-up, and in the exploration made on the 7th day, no findings of infection were observed. In Group 2, hyperemia and collection were seen to have formed on day 3, abscess had started to form in all the rats of this group on day 4, a purulent discharge in the wound site had started in 12 animals on day 5, separation of the wound site was observed in 6 on day 6, and in the exploration on day 7, there was seen to be a fibrin and pus-rich collection around the graft in all cases. In Group 4, there were hyperemia and collection in 6 animals on day 4, and in 3 of these, abscess was seen to have formed on the 5th day. No purulent discharge or wound separation was observed. In the exploration on the 7th day, it was seen that in the animals with abscess development, the formation was of a localized abscess. The results of the cultures of the grafts removed from Groups 1 and 3 showed no production, whereas production was seen in all the grafts removed from Groups 2 and 4. Clinical surgical area infection was seen to have developed in 100% of Group 2 and in 40% of Group 4. In the comparison of the number of colonies, a statistically significantly lower number of bacteria were determined in Group 4 compared to Group 2 (p < 0.05). In the SEM images taken of Group 2, bacteria clusters were seen attached to the graft.

CONCLUSION

Consistent with previous findings in the literature, the NS-coated polypropylene graft was seen to have a significantly better bactericidal effect than the normal polypropylene graft. Development of NS-coated grafts seems to be a reliable and applicable method to reduce the incidence of postoperative graft infection.

Bioengineering of Functional Nanosilver Nanogels for Smart Healthcare Systems

Functional designing of nanogels has become an attractive domain of biomedical engineering to develop bioactive materials with innovative features for the human healthcare system. Nanosilver has attracted enormous attention due to its wide antimicrobial spectrum and ability to kill almost all types of bacteria in its vicinity. However, the most crucial challenge for bioscientists is the lack of binding ability of nanosilver with the material surfaces that allow nanosilver to leach out to the surrounding tissue and exert toxicity while the biomaterial is in contact with the living system. Designing nanosilver within a nanogel confinement offers enormous possibilities to develop functional bioactive nanoparticles that may be bonded to any biomaterial surface via the nanogel functionality. This approach requires the proper combination of material science with nanotechnology and biotechnology to innovate interesting domain of functional nanogels with unique features. This work aims at providing a critical review on the current progress, approaches, and vision in designing nanosilver-entrapped nanogel particles with diverse functionality, and their bioactivity against microorganisms for human healthcare devices.

Bioinspired, Manganese-Chelated Alginate-Polydopamine Nanomaterials for Efficient in Vivo T1-Weighted Magnetic Resonance Imaging

Manganese-based nanomaterials are an emerging new class of magnetic resonance imaging (MRI) contrast agents (CAs) that provide impressive contrast abilities. MRI CAs that can respond to pathophysiological parameters such as pH or redox potential are also highly in demand for MRI-guided tumor diagnosis. Until now, synthesizing nanomaterials with good biocompatibility, physiochemical stability, and good contrast effects remains a challenge. This study investigated two new systems of calcium/manganese cations complexed with either alginate-polydopamine or alginate-dopamine nanogels [AlgPDA(Ca/Mn) NG or AlgDA(Ca/Mn) NG]. Under such systems, Ca cations form ionic interactions via carboxylic acids of the Alg backbone to enhance the stability of the synthetic nanogels (NGs). Likewise, complexation of Mn cations also increased the colloidal stability of the synthetic NGs. The magnetic property of the prepared CAs was confirmed with superconducting quantum interference device measurements, proving the potential paramagnetic property. Hence, the T₁ relaxivity measurement showed that PDA-complexed synthetic NGs reveal a strong positive contrast enhancement with r₁ = 12.54 mM^-1·s^-1 in 7.0 T MRI images, whereas DA-complexed synthetic NGs showed a relatively lower T₁ relaxivity effect with r₁ = 10.13 mM^-1·s^-1. In addition, both the synthetic NGs exhibit negligible cytotoxicity with >92% cell viability up to 0.25 mM concentration, when incubated with the mouse macrophage (RAW 264.7) and HeLa cells, and high biocompatibility under in vivo analysis. The in vivo MRI test indicates that the synthetic NG exhibits a high signal-to-noise ratio for longer hours, which provides a longer image acquisition time for tumor and anatomical imaging. Furthermore, T₁-weighted MRI results revealed that PEGylated AlgPDA(Ca/Mn) NGs significantly enhanced the signals from liver and tumor tissues. Therefore, owing to the enhanced permeability and retention effect, significantly enhanced in vitro and in vivo imagings, low cost, and one-pot synthesis method, the Mn-based biomimetic approach used in this study provides a promising and competitive alternative for noninvasive tumor detection and comprehensive anatomical diagnosis.

Mussel-Inspired Biomaterials for Cell and Tissue Engineering

In designing biomaterial for regenerative medicine or tissue engineering, there are a variety of issues to consider including biocompatibility, biochemical reactivity, and cellular interaction etc. Mussel-inspired biomaterials have received much attention because of its appealing features including strong adhesiveness on moist surfaces, enhancement of cell adhesion, immobilization of bioactive molecules and its amenability to post-functionalization via catechol chemistry. In this review chapter, we give a brief introduction on the basic principles of mussel-inspired polydopamine coating, catechol conjugation, and discuss how their features play a vital role in biomedical application. Special emphasis is placed on tissue engineering and regenerative applications. We aspire to give readers of this book a comprehensive insight into mussel-inspired biomaterials that can facilitate them make significant contributions in this promising field.

Cell-Adhesive Bioinspired and Catechol-Based Multilayer Freestanding Membranes for Bone Tissue Engineering

Mussels are marine organisms that have been mimicked due to their exceptional adhesive properties to all kind of surfaces, including rocks, under wet conditions. The proteins present on the mussel's foot contain 3,4-dihydroxy-l-alanine (DOPA), an amino acid from the catechol family that has been reported by their adhesive character. Therefore, we synthesized a mussel-inspired conjugated polymer, modifying the backbone of hyaluronic acid with dopamine by carbodiimide chemistry. Ultraviolet-visible (UV-vis) spectroscopy and nuclear magnetic resonance (NMR) techniques confirmed the success of this modification. Different techniques have been reported to produce two-dimensional (2D) or three-dimensional (3D) systems capable to support cells and tissue regeneration; among others, multilayer systems allow the construction of hierarchical structures from nano- to macroscales. In this study, the layer-by-layer (LbL) technique was used to produce freestanding multilayer membranes made uniquely of chitosan and dopamine-modified hyaluronic acid (HA-DN). The electrostatic interactions were found to be the main forces involved in the film construction. The surface morphology, chemistry, and mechanical properties of the freestanding membranes were characterized, confirming the enhancement of the adhesive properties in the presence of HA-DN. The MC3T3-E1 cell line was cultured on the surface of the membranes, demonstrating the potential of these freestanding multilayer systems to be used for bone tissue engineering.

Effect of Different Titanium Surfaces on Maturation of Murine Bone Marrow-Derived Dendritic Cells

Dendritic cells (DCs) play a pivotal role in the host response to implanted biomaterials. Osseointegration of titanium (Ti) implant is an immunological and inflammatory-driven process. However, the role of DCs in this complex process is largely unknown. This study aimed to investigate the effect of different Ti surfaces on DC maturation, and evaluate its subsequent potential on osteogenic differentiation of preosteoblasts. Murine bone marrow-derived DCs were seeded on Ti disks with different surface treatments, including pretreatment (PT), sandblasted/acid-etched (SLA) and modified SLA (modSLA) surface. Compared with DCs cultured on PT and SLA surfaces, the cells seeded on modSLA surface demonstrated a more round morphology with lower expression of CD86 and MHC-II, the DC maturation markers. Those cells also secreted high levels of anti-inflammatory cytokine IL-10 and TGF-β. Notably, addition of conditioned medium (CM) from modSLA-induced DCs significantly increased the mRNA expression of Runx2 and ALP as well as ALP activity by murine preosteoblast MC3T3-E1 cells. Our data demonstrated that Ti disks with different surfaces lead to differential DCs responses. PT and SLA surfaces induce DCs mature, while DCs seeded on modSLA-Ti surface maintain an immature phenotype and exhibit a potential of promoting osteogenic differentiation of MC3T3-E1 cells.

A novel nano-silver coated and hydrogel-impregnated polyurethane nanofibrous mesh for ventral hernia repair

Patches for hernia repair have two existing concerns: antibacterial and tissue adhesion.