New strategy for design and fabrication of polymer hydrogel with tunable porosity as artificial corneal skirt

Self-healing amino acid-bearing acrylamides/n-butyl acrylate copolymers via multiple noncovalent bonds

Four amino acid-bearing acrylamides, N-acryloyl-l-threonine (AThrOH), N-acryloyl-l-glutamic acid (AGluOH), N-acryloyl-l-phenylalanine (APheOH), and N-acryloyl-l, l-diphenylalanine (APhePheOH), were selected for copolymerization with n-butyl acrylate (nBA) to develop amino acid-based self-healable copolymers. A series of copolymers comprising amino acid-bearing acrylamides and nBA with tunable comonomer compositions and molecular weights were synthesized by free radical and reversible addition-fragmentation chain-transfer copolymerization. Self-healing and mechanical properties originated from the noncovalent bonds between the carboxyl, hydroxyl, and amide groups, and π-π stacking interactions among the amino acid residues in the side chains were evaluated. Among these copolymers, P(nBA-co-AGluOH) with suitable comonomer compositions and molecular weights (nBA : AGluOH = 82 : 18, Mn = 18 300, Mw/Mn = 2.58) exhibited good mechanical properties (modulus of toughness = 17.3 MJ m-3) and self-healing under ambient conditions. The multiple noncovalent bonds of P(nBA-co-AGluOH)s were also efficient in improving the optical properties with an enhanced refractive index and good transparency.

Gelatin nanofibers: Recent insights in synthesis, bio-medical applications and limitations

The use of gelatin and gelatin-blend polymers as environmentally safe polymers to synthesis electrospun nanofibers, has caused a revolution in the biomedical field. The development of efficient nanofibers has played a significant role in drug delivery, and for use in advanced scaffolds in regenerative medicine. Gelatin is an exceptional biopolymer, which is highly versatile, despite variations in the processing technology. The electrospinning process is an efficient technique for the manufacture of gelatin electrospun nanofibers (GNFs), as it is simple, efficient, and cost-effective. GNFs have higher porosity with large surface area and biocompatibility, despite that there are some drawbacks. These drawbacks include rapid degradation, poor mechanical strength, and complete dissolution, which limits the use of gelatin electrospun nanofibers in this form for biomedicine. Thus, these fibers need to be cross-linked, in order to control its solubility. This modification caused an improvement in the biological properties of GNFs, which made them suitable candidates for various biomedical applications, such as wound healing, drug delivery, bone regeneration, tubular scaffolding, skin, nerve, kidney, and cardiac tissue engineering. In this review an outline of electrospinning is shown with critical summary of literature evaluated with respect to the various applications of nanofibers-derived gelatin.

Graded-Three-Dimensional Cell-Encapsulating Hydrogel as a Potential Biologic Scaffold for Disc Tissue Engineering

BACKGROUND

Intervertebral disk (IVD) degeneration, which can cause lower back pain, is a major predisposing factor for disability and can be managed through multiple approaches. However, there is no satisfactory strategy currently available to reconstruct and recover the natural properties of IVDs after degeneration. As tissue engineering develops, scaffolds with embedded cell cultures have proved critical for the successful regeneration of IVDs.

METHODS

In this study, an integrated scaffold for IVD replacement was developed. Through scanning electron microscopy and other mechanical measurements, we characterized the physical properties of different hydrogels. In addition, we simulated the physiological structure of natural IVDs. Nucleus pulposus (NP) cells and annulus fibrosus-derived stem cells (AFSCs) were seeded in gelatin methacrylate (GelMA) hydrogel at different concentrations to evaluate cell viability and matrix expression.

RESULTS

It was found that different concentrations of GelMA hydrogel can provide a suitable environment for cell survival. However, hydrogels with different mechanical properties influence cell adhesion and extracellular matrix component type I collagen, type II collagen, and aggrecan expression.

CONCLUSION

This tissue-engineered IVD implant had a similar structure and function as the native IVD, with the inner area mimicking the NP tissue and the outer area mimicking the stratified annulus fibrosus tissue. The new integrated scaffold demonstrated a good simulation of disc structure. The preparation of efficient and regeneration-promoting tissue-engineered scaffolds is an important issue that needs to be explored in the future. It is hoped that this work will provide new ideas and methods for the further construction of functional tissue replacement discs.

Collagen Film with Bionic Layered Structure and High Light Transmittance for Personalized Corneal Repair Fabricated by Controlled Solvent Evaporation Technique

Corneal blindness is a common phenomenon, and corneal transplantation is an effective treatment for corneal defects. However, there is usually a mismatch between the corneal repair material and the degree of the patient’s corneal defect. Therefore, patients with different corneal defects need suitable corneal repair materials with a specific microstructure for personalized treatment. In this research, collagen films with bionic structures were fabricated through ethanol evaporation technique by regulating the volume ratios of collagen solution: ethanol = 10:0(Col)/9:1(CC91)/8:2(CC82)/CC73(CC73). Under various preparation conditions, the obtained collagen films contain layered structures of different density. SEM photos show that the CC73 film with a dense layer arrangement has a microstructure similar to that of the corneal epithelial layer, whereas the Col film has a loose layered structure similar to that of the corneal stroma layer. Four kinds of collagen films showed different optical properties and water absorption ability. A more ordered arrangement of internal layer structure leads to better mechanical properties of the collagen film. In view of this, we think that these collagen films with different microstructures and different interlayer spacing may have huge potential applications for personalized corneal repair.

Preparation and In Vitro Characterization of Gelatin Methacrylate for Corneal Tissue Engineering

BACKGROUND

Corneal disease is second only to cataract considered as the leading cause of blindness in the world, with high morbidity. Construction of corneal substitutes in vitro by tissue engineering technology to achieve corneal regeneration has become a research hotspot in recent years. We conducted in-depth research on the biocompatibility, physicochemical and mechanical properties of rat bone marrow mesenchymal stem cells (rBM-MSCs)-seeded gelatin methacrylate (GelMA) as a bioengineered cornea.

METHODS

Four kinds of GelMA with different concentrations (7, 10, 15 and 30%) were prepared, and their physic-chemical, optical properties, and biocompatibility with rBM-MSCs were characterized. MTT, live/dead staining, cell morphology, immunofluorescence staining and gene expression of keratocyte markers were performed.

RESULTS

7%GelMA hydrogel had higher equilibrium water content and porosity, better optical properties and hydrophilicity. In addition, it is more beneficial to the growth and proliferation of rBM-MSCs. However, the 30%GelMA hydrogel had the best mechanical properties, and could be more conducive to promote the differentiation of rBM-MSCs into keratocyte-like cells.

CONCLUSION

As a natural biological scaffold, GelMA hydrogel has good biocompatibility. And it has the ability to promote the differentiation of rBM-MSCs into keratocyte-like cells, which laid a theoretical and experimental foundation for further tissue-engineered corneal stromal transplantation, and provided a new idea for the source of seeded cells in corneal tissue engineering.

Skin wounds, the healing process, and hydrogel-based wound dressings: a short review

Skin wounds are damage to the epithelial layer and the integrity of living tissue. The healing mechanism is dynamic and complex, and often treatments with wound dressings help in tissue regeneration, reducing the risk of infections. Polymeric hydrogels become good candidates for wet curing process. These materials prevent dehydration of the tissue and avoid discomfort to the patient when changing the dressing. In this short review, we demonstrate the importance of the healing process, the types of skin wounds, and the hydrogels that are potentially attractive as wound dressings.

Hydrogels as Emerging Materials for Cornea Wound Healing

Hydrogel biomaterials have many favorable characteristics including tuneable mechanical behavior, cytocompatibility, optical properties suitable for regeneration and restoration of the damaged cornea tissue. The cornea is a tissue susceptible to various injuries and traumas with a complicated healing cascade, in which conserving its transparency and integrity is critical. Accordingly, the hydrogels' known properties along with the stimulation of nerve and cell regeneration make them ideal scaffold for corneal tissue engineering. Hydrogels have been used extensively in clinical applications for the repair and replacement of diseased organs. The development and optimizing of novel hydrogels to repair/replace corneal injuries have been the main focus of researches within the last decade. This research aims to critically review in vitro, preclinical, as well as clinical trial studies related to corneal wound healing using hydrogels in the past 10 years, as this is considered as an emerging technology for corneal treatment. Several unique modifications of hydrogels with smart behaviors have undergone early phase clinical trials and showed promising outcomes. Financially, this considers a multibillion dollars industry and with huge interest from medical devices as well as pharmaceutical industries with several products may emerge within the next five years.

Curdlan-Based Hydrogels for Potential Application as Dressings for Promotion of Skin Wound Healing-Preliminary In Vitro Studies

The aim of this work was to establish whether novel curdlan-based hydrogels enriched with Ca²⁺ ions may be considered as potential candidates for dressings, for the acceleration of skin wound healing. Firstly, biomaterials were allocated for evaluation of structural and mechanical properties. Subsequently, the ability of hydrogels to absorb simulated wound fluid and water vapor permeability, as well their capacity to release calcium ions, was evaluated. The biocompatibility of biomaterials was assessed using normal human skin fibroblasts. Importantly, the main features of the obtained curdlan-based hydrogels were compared with those of KALTOSTAT^® (a commercial calcium sodium alginate wound dressing). The obtained results showed that curdlan-based biomaterials possessed a mesoporous structure (pore diameter ranged from 14–48 nm) and exhibited a good ability to absorb simulated wound fluid (swelling ratio close to 974–1229%). Moreover, in a wet state, they enabled proper water vapor transmission rate (>2000 g/m²/day), thanks to their hydrogel structure. Finally, it was found that biomaterial composed of 11 wt.% of curdlan (Cur_11%) possessed the most desirable biological properties in vitro. It released a beneficial amount of calcium ions to the aqueous environment (approximately 6.12 mM), which significantly enhanced fibroblast viability and proliferation. Taking into account the beneficial properties of Cur_11% biomaterial, it seems justified to subject it to more advanced cell culture experiments in vitro and to in vivo studies in order to determine its precise influence on skin wound healing.

Lipid-Bilayer Assemblies on Polymer-Bearing Surfaces: The Nature of the Slip Plane in Asymmetric Boundary Lubrication

Phospholipid-macromolecule complexes have been proposed to form highly efficient, lubricating boundary layers at artificial soft surfaces or at biological surfaces such as articular cartilage, where the friction reduction is attributed to the hydration lubrication mechanism acting at the exposed, hydrated head groups of the lipids. Here we measure, using a surface force balance, the normal and frictional interactions between model mica substrates across several different configurations of phosphatidylcholine (PC) lipid aggregates and adsorbed polymer (PEO) layers, to provide insight into the nature of such lubricating boundary layers in both symmetric and especially asymmetric configurations. Our results reveal that, irrespective of the configuration, the slip plane between the sliding surfaces reverts wherever possible to a bilayer-bilayer interface where hydration lubrication reduces the friction strongly. Where such an interface is not available, the sliding friction remains high. These findings may account for the low friction observed between both biological and synthetic hydrogel surfaces which may be asymmetrically coated with lipid-based boundary layers and fully support the hydration lubrication mechanism attributed to act at such boundary layers.

Applications of Gelatin Methacryloyl (GelMA) Hydrogels in Microfluidic Technique-Assisted Tissue Engineering

In recent years, the microfluidic technique has been widely used in the field of tissue engineering. Possessing the advantages of large-scale integration and flexible manipulation, microfluidic devices may serve as the production line of building blocks and the microenvironment simulator in tissue engineering. Additionally, in microfluidic technique-assisted tissue engineering, various biomaterials are desired to fabricate the tissue mimicking or repairing structures (i.e., particles, fibers, and scaffolds). Among the materials, gelatin methacrylate (GelMA)-based hydrogels have shown great potential due to their biocompatibility and mechanical tenability. In this work, applications of GelMA hydrogels in microfluidic technique-assisted tissue engineering are reviewed mainly from two viewpoints: Serving as raw materials for microfluidic fabrication of building blocks in tissue engineering and the simulation units in microfluidic chip-based microenvironment-mimicking devices. In addition, challenges and outlooks of the exploration of GelMA hydrogels in tissue engineering applications are proposed.

Porous Curdlan-Based Hydrogels Modified with Copper Ions as Potential Dressings for Prevention and Management of Bacterial Wound Infection-An In Vitro Assessment

Bacterial infections at the wound site still remain a huge problem for current medicine, as they may lead to development of chronic wounds. In order to prevent such infections, there is a need to use wound dressings that possess ability to inhibit bacterial colonization. In this study, three new curdlan-based biomaterials modified with copper ions were fabricated via simple and inexpensive procedure, and their structural, physicochemical, and biological properties in vitro were evaluated. Received biomaterials possessed porous structure, had ability to absorb high amount of simulated wound fluid, and importantly, they exhibited satisfactory antibacterial properties. Nevertheless, taking into account all evaluated properties of new curdlan-based biomaterials, it seems that Cur_Cu_8% is the most promising biomaterial for management of wounds accompanied with bacterial infections. This biomaterial exhibited the best ability to reduce Escherichia coli and Staphylococcus aureus growth and moreover, it absorbed the highest amount of simulated wound fluid as well as enabled optimal water vapor transmission. Furthermore, Cur_Cu_8% biomaterial possessed the best values of selective indexes, which determine its potential safety in vitro. Thus, Cur_Cu_8% hydrogel may be considered as a promising candidate for management of infected wounds as well as it may constitute a good platform for further modifications.

Protein-Stabilizing Effect of Amphiphilic Block Copolymers with a Tertiary Sulfonium-Containing Zwitterionic Segment

Tertiary sulfonium-containing zwitterionic block copolymers consisting of N-acryloyl-l-methionine methyl sulfonium salt (A-Met(S+)-OH) and n-butyl acrylate (BA) were newly synthesized to develop a novel protein stabilizer. The zwitterionic block copolymers were prepared by reversible addition-fragmentation chain-transfer (RAFT) polymerization of BA using a hydrophilic macro-chain-transfer agent (CTA) obtained from N-acryloyl-l-methionine (A-Met-OH) and subsequent postmodification. RAFT polymerization of A-Met-OH using poly(BA) macro-CTA, followed by postmodification, also afforded the target poly(A-Met(S+)-OH)-b-poly(BA). The block copolymers stabilized horseradish peroxidase (HRP) during storage at 37 °C for 5 days, and the protein-stabilizing effect was enhanced with increase in the A-Met(S+)-OH content. In particular, the block copolymer with ∼85% A-Met(S+)-OH content showed a significant protein-stabilizing effect at a temperature (37 °C) higher than the room temperature, which is highly desirable for practical and industrial applications. The addition of sucrose into the block copolymer-protein solution led to a considerable increase in the HRP activity under the same conditions. Excellent alkaline phosphatase stabilization at 37 °C for 12 days was also achieved using the block copolymers. The zwitterionic block copolymers with the optimal hydrophilic/hydrophobic balance were found to serve as efficient protein-stabilizing agents, in comparison with the corresponding homopolymer and random copolymers. Dynamic light scattering, zeta potential, transmission electron microscopy, and circular dichroism measurements revealed that the zwitterionic block copolymer stabilizes an enzyme by wrapping with a slight change in the size, whereas the secondary and ordered structures of the enzyme are maintained.

Preparation and in vitro characterization of cross-linked collagen-gelatin hydrogel using EDC/NHS for corneal tissue engineering applications

Corneal disease is considered as the second leading cause of vision loss and keratoplasty is known as an effective treatment for it. However, the tissue engineered corneal substitutes are promising tools in experimental in vivo repair of cornea. Selecting appropriate cell sources and scaffolds are two important concerns in corneal tissue engineering. The object of this study was to investigate biocompatibility and physical properties of the bio-engineered cornea, fabricated from type-I collagen (COL) and gelatin (Gel). Two gelatin based hydrogels cross-linked with EDC/NHS were fabricated, and their physicochemical properties such as equilibrium water content, enzymatic degradation, mechanical properties, rheological, contact angle and optical properties as well as their ability to support human bone-marrow mesenchymal stem cells (hBM-MSCs) survival were characterized. The equilibrium water content and enzymatic degradation of these hydrogels can be easily controlled by adding COL. Our findings suggest that incorporation of COL-I increases optical properties, hydrophilicity, stiffness and Young's modulus. The viability of hBM-MSCs cultured in Gel and Gel: COL was assessed via CCK-8 assay. Also, the morphology of the hBM-MSCs on the top of Gel and Gel: COL hydrogels were characterized by phase-contrast microscopy. This biocompatible hydrogel may promise to be used as artificial corneal substitutes.

Morphology-Controllable Collagen/Poly(2-hydroxyethyl methacrylate) Porous Hydrogel with a Paraffin Microsphere as a Template

In this study, a porous poly(2-hydroxyethyl methacrylate) (PHEMA) matrix was fabricated by a paraffin template method, which was used as a substrate to adhere collagen fibers to form an interconnective porous collagen/PHEMA (Col-PHEMA) composite hydrogel. A microscope and scanning electron microscope (SEM) were employed to characterize the morphology of paraffin microspheres and Col-PHEMA composite hydrogels. The paraffin microspheres with the diameter in the range from 100 to 200 μm were collected by a preset sieve. Then, the interface of uniform paraffin microspheres were thermally bonded to form a contacted template, and the derived Col-PHEMA composite hydrogels had an interconnective porous microstructure. Fourier transform infrared spectroscopy (FTIR) indicated that new hydrogen bonds were formed between collagen fibers and the PHEMA hydrogel. Besides, the Col-PHEMA composite hydrogels revealed a high hydrophilicity, good mechanical properties, and good water uptake capacity. The porous Col-PHEMA composite hydrogels showed a good biocompatibility, and the collagen layer may promote the proliferation of fibroblast cells. The Col-PHEMA composite hydrogel is expected to find an application in corneal repairing.

High modulus hydrogels for ophthalmic and related biomedical applications

This paper presents three families of semi-interpenetrating polymer network (SIPN) hydrogels based on an ester-based polyurethane (EBPU) and hydrophilic monomers: N,N-dimethylacrylamide (NNDMA), N-vinyl pyrrolidone (NVP) and acryloylmorpholine (AMO) as potential materials for keratoprosthesis, orthokeratology and mini-scleral lens application. Hydrogels sheets were synthesized via free-radical polymerization with methods developed in-house. SIPN hydrogels were characterized for their equilibrium water content, mechanical and surface properties. Three families of optically clear SIPN-based hydrogels have been synthesized in the presence of water with >10% of composition attributable to EBPU. Water contents of SIPN materials ranged from 30% to 70%. SIPNs with ≤15% EBPU of total composition showed little influence to mechanical properties, whereas >15% EBPU contributed significantly to an increase in material stiffness. In the hydrated state, SIPNs with ≤15% EBPU of total composition show little difference in polar component (γ^p ) of surface free energy, whereas for >15% EBPU there is a decrease in γ^p . The EBPU SIPN hydrogels display complementary material properties for keratoprosthesis, orthokeratology, and mini-scleral applications. © 2018 The Authors. Journal of Biomedical Materials Research Part B: Applied Biomaterials published by Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1645-1653, 2019.

Ophthalmic gels: Past, present and future

Aqueous gels formulated using hydrophilic polymers (hydrogels) along with those based on stimuli responsive polymers (in situ gelling or gel forming systems) continue to attract increasing interest for various eye health-related applications. They allow the incorporation of a variety of ophthalmic pharmaceuticals to achieve therapeutic levels of drugs and bioactives at target ocular sites. The integration of sophisticated drug delivery technologies such as nanotechnology-based ones with intelligent and environment responsive systems can extend current treatment duration to provide more clinically relevant time courses (weeks and months instead of hours and days) which will inevitably reduce dose frequency, increase patient compliance and improve clinical outcomes. Novel applications and design of contact lenses and intracanalicular delivery devices along with the move towards integrating gels into various drug delivery devices like intraocular pumps, injections and implants has the potential to reduce comorbidities caused by glaucoma, corneal keratopathy, cataract, diabetic retinopathies and age-related macular degeneration. This review describes ophthalmic gelling systems with emphasis on mechanism of gel formation and application in ophthalmology. It provides a critical appraisal of the techniques and methods used in the characterization of ophthalmic preformed gels and in situ gelling systems along with a thorough insight into the safety and biocompatibility of these systems. Newly developed ophthalmic gels, hydrogels, preformed gels and in situ gelling systems including the latest in the area of stimuli responsive gels, molecularly imprinted gels, nanogels, 3D printed hydrogels; 3D printed devices comprising ophthalmic gels are covered. Finally, new applications of gels in the production of artificial corneas, corneal wound healing and hydrogel contact lenses are described.