Sustained drug release and electrochemical performance of ethyl cellulose-magnesium hydrogen phosphate composite

Nanocellulose-Based Composite Materials Used in Drug Delivery Systems

Nanocellulose has lately emerged as one of the most promising "green" materials due to its unique properties. Nanocellulose can be mainly divided into three types, i.e., cellulose nanocrystals (CNCs), cellulose nanofibrils (CNFs), and bacterial cellulose (BC). With the rapid development of technology, nanocellulose has been designed into multidimensional structures, including 1D (nanofibers, microparticles), 2D (films), and 3D (hydrogels, aerogels) materials. Due to its adaptable surface chemistry, high surface area, biocompatibility, and biodegradability, nanocellulose-based composite materials can be further transformed as drug delivery carriers. Herein, nanocellulose-based composite material used for drug delivery was reviewed. The typical drug release behaviors and the drug release mechanisms of nanocellulose-based composite materials were further summarized, and the potential application of nanocellulose-based composite materials was prospected as well.

Single Nanoporous MgHPO4·1.2H2O for Daytime Radiative Cooling

Objects can radiate emission of heat to outer empty space (3 K) through an atmospheric window (8-13 μm), resulting in a possibility for radiative cooling. Multilayer film stacking designs and complex nanophoton coolers have been reported for radiative cooling. Here, we have found that single nanoporous MgHPO₄·1.2H₂O powder has a high reflectance of 92.20% in the solar spectral region of 0.3-2.5 μm and a high emissivity of 0.94 in the atmospheric window of 8-13 μm. The powder was film-coated on ceramic tiles for temperature and cooling power tests on Al foil. The test results showed that the MgHPO₄·1.2H₂O coating on the ceramic tile could achieves a daytime radiative cooling of 4.1 °C below the ambient air temperature and a nighttime radiative cooling of 7.6 °C. The average cooling power reaches 78.18 W/m². Such a simple and low-cost single nanoporous MgHPO₄·1.2H₂O powder material offers a novel option for large-scale applications of radiative cooling.

Biocompatible polylactic acid-reinforced nickel-arsenate composite: Studies of electrochemical conductivity, mechanical stability, and cell viability

In continuation to our earlier work on nickel (Ni)-arsenate (As) composite, the current work deals with the electrical conductivity and mechanical resistivity of the same composite by means of its further reinforcement with the polylactic acid (PLA) polymer. For the PLA-Ni-As composite, we understand from the electrochemical studies that the conductivity is strongly influenced by the temperature and due to the presence of external electrolyte. The DC electrical conductivity approach used for the temperature dependency provided the information that the conductivity falls in the semiconductor zone ranging at 10^-3 S cm^-1, thereby indicating that it followed the Arrhenius equation. In addition, we found in terms of the mechanical properties that the PLA-Ni-As composite outperformed the plain, untreated Ni-As composite by reducing the activation energy. For the mechanical resistivity studies we found that the 25% PLA-loaded Ni-As material significantly improved the tensile strength and modulus, elongation at break %, impact properties and also the flexural strength and modulus as against the plain and other combinations due to enhanced interfacial interactions. The cell viability and proliferations studies tested against two different cell lines provided the information that the presence of polymer reduces the toxic response of arsenic material. From the cumulative analysis therefore, we indicate that the PLA-Ni-As composite can be a potential candidate to find its uses in the electrochemical and solar cells, in addition to automotive and aerospace industry.

Development and characterization of ricinoleic acid-based sulfhydryl thiol and ethyl cellulose blended membranes

Ethyl cellulose (EC) membranes can be combined with efficient plasticizers derived from renewable resources to form supramolecular systems. In this paper, a novel ricinoleic acid-based sulfhydryl triol (STRA) was first synthesized and used as a plasticizer for EC membranes. A supramolecular membrane of EC and STRA using van der Waals forces was designed. The morphology, hydrophilic performance, thermal stability, and mechanical properties of the composites were investigated. While pure EC is brittle, its membrane ductility and hydrophilic performance can be improved by integration with STRA. The highest tensile strength was found in EC/STRA (90/10) (8.37MPa). Impressively, the EC/STRA(60/40) and EC/STRA(50/50) elongation at break values were 17.4 and 20.2 times higher, respectively, than that of pure EC. This novel ricinoleic acid-based sulfhydryl triol can be used as a feedstock for hydrophobic EC membranes.

Luteinizing hormone-releasing hormone targeted superparamagnetic gold nanoshells for a combination therapy of hyperthermia and controlled drug delivery

In this, we developed superparamagnetic iron oxide nanoparticles (SPIONs) to be appropriate for the diagnosis and treatment of cancer cells by means of magnetic resonance imaging (MRI) and magnetically controlled hyperthermia/drug delivery (respectively). For the preparation of composite, we started with SPIONs, followed by its coating with gold to form SPIONs@Au, which further conjugated with luteinizing hormone-releasing hormone (LHRH) protein by making use of the cysteamine (Cyst) space linker and finally loaded with 5-Fluororacil (5-Fu) anticancer drug to form SPIONs@Au-Cyst-LHRH_5-Fu composite. Thus formed composite was thoroughly characterized by making use of the instrumental analysis such as HRTEM, EDAX, DLS, TGA, XPS, UV-vis, FTIR, HPLC and SQUID magnetics. We found from the analysis that the particles are spherical in shape, monodispersed with a size distribution of around 6.9nm in powdered dry form, while in solution phase it is 8.7nm. The UV-vis, FTIR, and HPLC studies confirmed for the loading of the 5-Fu drug onto the surface of SPIONs core and the maximum amount of drug that got adsorbed to be about 42%. The SQUID magnetic studies provided the information for the superparamagnetic behavior of the drug loaded SPIONs and the saturation magnetization (Ms) values observed to be about 11emu/g and the blocking temperature (T_B) of 348K. On testing the particles to see the effects of magnetic fluid hyperthermia (MFH) due to some changes in the solvent medium and oscillating frequency, the material seems to be highly active in aqueous medium and the activity gets increased with respect to the applied frequency of oscillation (430Hz>230Hz>44Hz). From the heat release studies, the calculated specific power loss (SPL) values for the SPIONs@Au-Cyst-LHRH_5-Fu composite are at the highest of 1068W/g in water (430Hz) vs the least of 68W/g in toluene (44Hz). Further, the drug release studies tested under the influence of magnetic field provided the information that the composite released its entire loaded drug following an exposure to the magnetic field (430Hz over 4h time), while only 53% (over 5h) for the controlled measurements of no magnetic field, thereby supporting to have the magnetic field so as to observe the externally controlled drug release effects. Finally, the results of the study provide the information that the SPIONs@Au-Cyst-LHRH_5-Fu composite can be potential for theranostic applications of cancer through the phenomenon of applying for MRI, magnetically controlled hyperthermia and drug delivery externally.