Heparin binding chitosan derivatives for production of pro-angiogenic hydrogels for promoting tissue healing

Synthesis of biocompatible hydrogel of alginate-chitosan enriched with iron sulfide nanocrystals

This work aimed to synthesize and characterize a biocompatible hydrogel of alginate and chitosan enriched with iron sulfide nanocrystals. Three concentrations of iron sulfide nanocrystals (FeS2NCs) 0.03905, 0.0781, and 0.2343 mg/ml were used. Gel swelling was determined using phosphate-buffered saline solution at 1, 2, 4, 6, 24, 48, and 72 h. The microstructure, the morphology, and the elastic strength were determined by optical microscopy, scanning electron microscopy, and rheological studies, respectively. The functional groups were identified through Fourier Transform Infrared spectroscopy. Biocompatibility was determined in a murine model; after seven days of subdermal inoculation, histological sections stained with H&E were analyzed, and then histopathological features were evaluated. All the compounds obtained showed a loss modulus lower than the storage modulus. The 0.2343 mg/ml FeS2NCs hydrogel showed higher swelling than the control. In the in vivo evaluation, no adverse effects were found. The presence of FeS2NCs was well tolerated in the subcutaneous tissue of mice, according to histopathological analysis. The hydrogels synthesized with added FeS2NCs demonstrate a swelling ratio of 150 %, rheologically exhibiting gel-like behavior rather than viscous liquids. Furthermore, they did not present any adverse effects on the subcutaneous tissue.

In vitro degradation, swelling, and bioactivity performances of in situ forming injectable chitosan-matrixed hydrogels for bone regeneration and drug delivery

Injectable, tissue mimetic, bioactive, and biodegradable hydrogels offer less invasive regeneration and repair of tissues. The monitoring swelling and in vitro degradation capacities of hydrogels are highly important for drug delivery and tissue regeneration processes. Bioactivity of bone tissue engineered constructs in terms of mineralized apatite formation capacity is also pivotal. We have previously reported in situ forming chitosan-based injectable hydrogels integrated with hydroxyapatite and heparin for bone regeneration, promoting angiogenesis. These hydrogels were functionalized by glycerol and pH to improve their mechano-structural properties. In the present study, functionalized hybrid hydrogels were investigated for their swelling, in vitro degradation, and bioactivity performances. Hydrogels have degraded gradually in phosphate-buffered saline (PBS) with and without lysozyme enzyme. The percentage weight loss of hydrogels and their morphological and chemical properties, and pH of media were analyzed. The swelling ratio of hydrogels (55%-68%(wt), 6 h of equilibrium) indicated a high degree of cross-linking, can be suitable for controlled drug release. Hydrogels have gradually degraded reaching to 60%-70% (wt%) in 42 days in the presence and absence of lysozyme, respectively. Simulated body fluid (SBF)-treated hydrogels containing hydroxyapatite-induced needle-like carbonated-apatite mineralization was further enhanced by heparin content significantly.

In vivo investigation of the anti-liver fibrosis impact of Balanites aegyptiaca/ chitosan nanoparticles

Balanites aegyptiaca (B. aegyptiaca) is an African herb with traditional medical applications. Various pathogenic factors cause hepatic fibrosis and require novel treatment alternatives. Nanoformulation-based natural products can overcome the available drug problems by increasing the efficacy of natural products targeting disease markers. The current study investigated B. aegyptiaca methanolic extract using high-pressure liquid chromatography (HPLC), and B. aegyptiaca/chitosan nanoparticles were prepared. In vivo, evaluation tests were performed to assess the curative effect of the successfully prepared B. aegyptiaca/chitosan nanoparticles. For 30 days, the rats were divided into six groups, typical and fibrosis groups, where the liver fibrosis groups received B. aegyptiaca extract, silymarin, chitosan nanoparticles, and B. aegyptiaca/chitosan nanoparticles daily. In the current investigation, phenolic molecules are the major compounds detected in B. aegyptiaca extract. UV showed that the prepared B. aegyptiaca /chitosan nanoparticles had a single peak at 280 nm, a particle size of 35.0 ± 6.0 nm, and a negative charge at - 8.3 mV. The animal studies showed that the synthetic B. aegyptiaca/chitosan nanoparticles showed substantial anti-fibrotic protective effects against CCl4-induced hepatic fibrosis in rats when compared with other groups through optimization of biochemical and oxidative markers, improved histological changes, and modulated the expression of Col1a1, Acta2 and Cxcl9 genes, which manage liver fibrosis. In conclusion, the current research indicated that the prepared B. aegyptiaca/chitosan nanoparticles improved histological structure and significantly enhanced the biochemical and genetic markers of liver fibrosis in an animal model.

A review on multifaceted biomedical applications of heparin nanocomposites: Progress and prospects

Advances in polymer-based nanocomposites have revolutionized biomedical applications over the last two decades. Heparin (HP), being a highly bioactive polymer of biological origin, provides strong biotic competence to the nanocomposites, broadening the horizon of their applicability. The efficiency, biocompatibility, and biodegradability properties of nanomaterials significantly improve upon the incorporation of heparin. Further, inclusion of structural/chemical derivatives, fractionates, and mimetics of heparin enable fabrication of versatile nanocomposites. Modern nanotechnological interventions have exploited the inherent biofunctionalities of heparin by formulating various nanomaterials, including inorganic/polymeric nanoparticles, nanofibers, quantum dots, micelles, liposomes, and nanogels ensuing novel functionalities targeting diverse clinical applications involving drug delivery, wound healing, tissue engineering, biocompatible coatings, nanosensors and so on. On this note, the present review explicitly summarises the recent HP-oriented nanotechnological developments, with a special emphasis on the reported successful engagement of HP and its derivatives/mimetics in nanocomposites for extensive applications in the laboratory and health-care facility. Further, the advantages and limitations/challenges specifically associated with HP in nanocomposites, undertaken in this current review are quintessential for future innovations/discoveries pertaining to HP-based nanocomposites.

Heparinized Acellular Hydrogels for Magnetically Induced Wound Healing Applications

The control of angiogenesis has the potential to be used for regulation of several pathological and physiological processes, which can be instrumental on the development of anticancer and wound healing therapeutical approaches. In this study, mesenchymal stem/stromal cells (MSCs) were seeded on magnetic-responsive gelatin, with or without heparin functionalization, and exposed to a static 0.08 T magnetic field (MF), for controlling their anti-inflammatory and angiogenic activity, with the aim of accelerating tissue healing. For the first time, it was examined how the amount of heparin and magnetic nanoparticles (MNPs) distributed on gelatin scaffolds affected the mechanical properties of the hydrogels and the morphology, proliferation, and secretome profiling of MSCs. The findings demonstrated that the addition of MNPs and heparin affects the hydrogel swelling capacity and renders distinct MSC proliferation rates. Additionally, MF acts as a topographical cue to guide MSCs alignment and increases the level of expression of specific genes and proteins that promote angiogenesis. The results also suggested that the presence of higher amounts of heparin (10 μg/cm3) interferes with the secretion and limits the capacity of angiogenic factors to diffuse through the hydrogel and into the culture medium. Ultimately, this study shows that acellular heparinized hydrogels efficiently retain the angiogenic growth factors released by magnetically stimulated MSCs thus rendering superior wound contraction (55.8% ± 0.4%) and cell migration rate (49.4% ± 0.4%), in comparison to nonheparinized hydrogels (35.2% ± 0.7% and 37.8% ± 0.7%, respectively). Therefore, these heparinized magnetic hydrogels can be used to facilitate angiogenesis in various forms of tissue damage including bone defects, skin wounds, and cardiovascular diseases, leading to enhanced tissue regeneration.

Aloe vera and ofloxacin incorporated chitosan hydrogels show antibacterial activity, stimulate angiogenesis and accelerate wound healing in full thickness rat model

Burns are potentially fatal and physically debilitating injuries, causing psychological and physical scars and result in chronic disabilities. A well vascularized wound bed is required to achieve complete and scar free wound closure. For many centuries, a variety of herbal plants have been used for wound healing, among these aloe vera (AV) has been found to be very effective in wound healing. Secondly, the main reason for delayed wound healing is bacterial infections. Ofloxacin (OX) has been reported as an active antibacterial drug for topical infections and it is effective against both positive and negative bacterial strains. In current research three different concentrations of OX (0.5, 2.5, and 5 mg) were loaded into chitosan (CS)/AV based hydrogels prepared by freeze gelation. The surface morphology of prepared CS/AV based OX loaded hydrogels were evaluated by scanning electron microscopy (SEM). In drug release analysis, 0.5 mg OX loaded hydrogel showed a sustained drug release behavior over 3 days period. An effective dose dependent antibacterial activity was exhibited by OX loaded hydrogels. Alamar Blue cells viability assay revealed that 0.5 mg OX hydrogel (CA 0.5 OX) showed comparatively better 3 T3 fibroblast cells proliferation as compared to CA 2.5 OX (2.5 mg OX) and CA 5 OX hydrogel (5 mg OX). Moreover, all OX loaded hydrogels showed good angiogenic activity in CAM bioassay while higher angiogenic potential was observed from CA 0.5 OX containing comparatively lower concentration of OX. These OX incorporated CS/AV based hydrogels are promising wound dressings for future clinical use.

Hydroxyapatite-Integrated, Heparin- and Glycerol-Functionalized Chitosan-Based Injectable Hydrogels with Improved Mechanical and Proangiogenic Performance

The investigation of natural bioactive injectable composites to induce angiogenesis during bone regeneration has been a part of recent minimally invasive regenerative medicine strategies. Our previous study involved the development of in situ-forming injectable composite hydrogels (Chitosan/Hydroxyapatite/Heparin) for bone regeneration. These hydrogels offered facile rheology, injectability, and gelation at 37 °C, as well as promising pro-angiogenic abilities. In the current study, these hydrogels were modified using glycerol as an additive and a pre-sterile production strategy to enhance their mechanical strength. These modifications allowed a further pH increment during neutralisation with maintained solution homogeneity. The synergetic effect of the pH increment and further hydrogen bonding due to the added glycerol improved the strength of the hydrogels substantially. SEM analyses showed highly cross-linked hydrogels (from high-pH solutions) with a hierarchical interlocking pore morphology. Hydrogel solutions showed more elastic flow properties and incipient gelation times decreased to just 2 to 3 min at 37 °C. Toluidine blue assay and SEM analyses showed that heparin formed a coating at the top layer of the hydrogels which contributed anionic bioactive surface features. The chick chorioallantoic membrane (CAM) assay confirmed significant enhancement of angiogenesis with chitosan-matrixed hydrogels comprising hydroxyapatite and small quantities of heparin (33 µg/mL) compared to basic chitosan hydrogels.

Application of chitosan nanoparticles in skin wound healing

The rising prevalence of impaired wound healing and the consequential healthcare burdens have gained increased attention over recent years. This has prompted research into the development of novel wound dressings with augmented wound healing functions. Nanoparticle (NP)-based delivery systems have become attractive candidates in constructing such wound dressings due to their various favourable attributes. The non-toxicity, biocompatibility and bioactivity of chitosan (CS)-based NPs make them ideal candidates for wound applications. This review focusses on the application of CS-based NP systems for use in wound treatment. An overview of the wound healing process was presented, followed by discussion on the properties and suitability of CS and its NPs in wound healing. The wound healing mechanisms exerted by CS-based NPs were then critically analysed and discussed in sections, namely haemostasis, infection prevention, inflammatory response, oxidative stress, angiogenesis, collagen deposition, and wound closure time. The results of the studies were thoroughly reviewed, and contradicting findings were identified and discussed. Based on the literature, the gap in research and future prospects in this research area were identified and highlighted. Current evidence shows that CS-based NPs possess superior wound healing effects either used on their own, or as drug delivery vehicles to encapsulate wound healing agents. It is concluded that great opportunities and potentials exist surrounding the use of CSNPs in wound healing.

Curcumin and Paclitaxel co-Loaded Heparin and Poloxamer P403 Hybrid Nanocarrier for Improved Synergistic Efficacy in Breast Cancer

Introduction:

Multi-drug nanosystem has been employed in several therapeutic models due to the synergistic effect of the drugs and/or bioactive compounds, which help in tumor-targeting and limit usual side effects of chemotherapy.

Methods:

In this research, we developed the amphiphilic Heparin-Poloxamer P403 (HSP) nanogel that can load curcumin (CUR) and Paclitaxel (PTX) through the hydrophobic core of Poloxamer P403. The features of HSP nanogel are assessed through Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), differential light scattering (DLS), and critical micelle concentration (CMC). Nanogel and its duel-loaded platform show high stability and spherical morphology.

Results:

The drug release profile indicates fast release at pH 5.5, suggesting effective drug distribution at the tumor site. In vitro research confirms lower cytotoxicity of HSP@CUR@PTX compared with free PTX and higher inhibition effect with MCF-7 than HSP@PTX. These results support the synergism between PTX and CUR.

Conclusion,:

HSP@CUR@PTX suggests a prominent strategy for achieving the synergistic effect of PTX and CUR to circumvent undesirable effects in breast cancer treatment.

Microwave-Assisted Physically Cross-Linked Chitosan-Sodium Alginate Hydrogel Membrane Doped with Curcumin as a Novel Wound Healing Platform

This project purposes to develop chitosan and sodium alginate-based hydrogel membranes loaded with curcumin through microwave-based physical cross-linking technique and its evaluation for wound healing potential. For the purpose, curcumin-loaded chitosan and sodium alginate membranes were developed using microwave at fixed frequency of 2450 MHz, power 350 W for 60 s, and tested for their physicochemical attributes like swelling, erosion, surface morphology, drug content, and in vitro drug release. The membranes were also subjected to tensile strength and vibrational and thermal analysis followed by testing in vivo on animals. The results indicated that microwave treatment significantly enhanced the swelling ability, reduced the erosion, and ensured smooth surface texture with optimal drug content. The drug was released in a slow fashion releasing total of 41 ± 4.2% within 24-h period with a higher tensile strength of 16.4 ± 5.3 Mpa. The vibrational analysis results revealed significant fluidization of hydrophilic domains and defluidization of hydrophobic domains which translated into a significant rise in the melting temperature and corresponding enthalpy which were found to be 285.2 ± 3.2 °C and 4.89 ± 1.4 J/g. The in vivo testing revealed higher percent re-epithelialization (75 ± 2.3%) within 14 days of the treatment application in comparison to only gauze and other treatments applied, with higher extent of collagen deposition having well-defined epidermis and stratum corneum formation. The microwave-treated chitosan-sodium alginate hydrogel membranes loaded with curcumin may prove to be another alternative to treat skin injuries. Graphical Abstract.

Microvascular Experimentation in the Chick Chorioallantoic Membrane as a Model for Screening Angiogenic Agents including from Gene-Modified Cells

The chick chorioallantoic membrane (CAM) assay model of angiogenesis has been highlighted as a relatively quick, low cost and effective model for the study of pro-angiogenic and anti-angiogenic factors. The chick CAM is a highly vascularised extraembryonic membrane which functions for gas exchange, nutrient exchange and waste removal for the growing chick embryo. It is beneficial as it can function as a treatment screening tool, which bridges the gap between cell based in vitro studies and in vivo animal experimentation. In this review, we explore the benefits and drawbacks of the CAM assay to study microcirculation, by the investigation of each distinct stage of the CAM assay procedure, including cultivation techniques, treatment applications and methods of determining an angiogenic response using this assay. We detail the angiogenic effect of treatments, including drugs, metabolites, genes and cells used in conjunction with the CAM assay, while also highlighting the testing of genetically modified cells. We also present a detailed exploration of the advantages and limitations of different CAM analysis techniques, including visual assessment, histological and molecular analysis along with vascular casting methods and live blood flow observations.

Development of Covalent Chitosan-Polyethylenimine Derivatives as Gene Delivery Vehicle: Synthesis, Characterization, and Evaluation

There is an increasing interest in cationic polymers as important constituents of non-viral gene delivery vectors. In the present study, we developed a versatile synthetic route for the production of covalent polymeric conjugates consisting of water-soluble depolymerized chitosan (dCS; M_W 6–9 kDa) and low molecular weight polyethylenimine (PEI; 2.5 kDa linear, 1.8 kDa branched). dCS-PEI derivatives were evaluated based on their physicochemical properties, including purity, covalent bonding, solubility in aqueous media, ability for DNA condensation, and colloidal stability of the resulting polyplexes. They were complexed with non-integrating DNA vectors coding for reporter genes by simple admixing and assessed in vitro using liver-derived HuH-7 cells for their transfection efficiency and cytotoxicity. Using a rational screening cascade, a lead compound was selected (dCS-Suc-LPEI-14) displaying the best balance of biocompatibility, cytotoxicity, and transfection efficiency. Scale-up and in vivo evaluation in wild-type mice allowed for a direct comparison with a commercially available non-viral delivery vector (in vivo-jetPEI). Hepatic expression of the reporter gene luciferase resulted in liver-specific bioluminescence, upon intrabiliary infusion of the chitosan-based polyplexes, which exceeded the signal of the in vivo jetPEI reference formulation by a factor of 10. We conclude that the novel chitosan-derivative dCS-Suc-LPEI-14 shows promise and potential as an efficient polymeric conjugate for non-viral in vivo gene therapy.

Advances of hydrogel dressings in diabetic wounds

The hydrogel dressings with various functions for diabetic wound treatment.

In-Situ Forming pH and Thermosensitive Injectable Hydrogels to Stimulate Angiogenesis: Potential Candidates for Fast Bone Regeneration Applications

Biomaterials that promote angiogenesis are required for repair and regeneration of bone. In-situ formed injectable hydrogels functionalised with bioactive agents, facilitating angiogenesis have high demand for bone regeneration. In this study, pH and thermosensitive hydrogels based on chitosan (CS) and hydroxyapatite (HA) composite materials loaded with heparin (Hep) were investigated for their pro-angiogenic potential. Hydrogel formulations with varying Hep concentrations were prepared by sol-gel technique for these homogeneous solutions were neutralised with sodium bicarbonate (NaHCO3) at 4 °C. Solutions (CS/HA/Hep) constituted hydrogels setting at 37 °C which was initiated from surface in 5-10 minutes. Hydrogels were characterised by performing injectability, gelation, rheology, morphology, chemical and biological analyses. Hydrogel solutions facilitated manual dropwise injection from 21 Gauge which is highly used for orthopaedic and dental administrations, and the maximum injection force measured through 19 G needle (17.191 ± 2.296N) was convenient for manual injections. Angiogenesis tests were performed by an ex-ovo chick chorioallantoic membrane (CAM) assay by applying injectable solutions on CAM, which produced in situ hydrogels. Hydrogels induced microvascularity in CAM assay this was confirmed by histology analyses. Hydrogels with lower concentration of Hep showed more efficiency in pro-angiogenic response. Thereof, novel injectable hydrogels inducing angiogenesis (CS/HA/Hep) are potential candidates for bone regeneration and drug delivery applications.

Glycosaminoglycan-Inspired Biomaterials for the Development of Bioactive Hydrogel Networks

Glycosaminoglycans (GAG) are long, linear polysaccharides that display a wide range of relevant biological roles. Particularly, in the extracellular matrix (ECM) GAG specifically interact with other biological molecules, such as growth factors, protecting them from proteolysis or inhibiting factors. Additionally, ECM GAG are partially responsible for the mechanical stability of tissues due to their capacity to retain high amounts of water, enabling hydration of the ECM and rendering it resistant to compressive forces. In this review, the use of GAG for developing hydrogel networks with improved biological activity and/or mechanical properties is discussed. Greater focus is given to strategies involving the production of hydrogels that are composed of GAG alone or in combination with other materials. Additionally, approaches used to introduce GAG-inspired features in biomaterials of different sources will also be presented.

Controlled releasing of SDF-1α in chitosan-heparin hydrogel for endometrium injury healing in rat model

Herein we report a facile approach for chitosan-heparin hydrogels with controlled release manner and their applications for intrauterine adhesion. The sol precursor was converted to gel at physiological temperature in 15 min. FTIR, SEM and swelling test were performed to characterize their compositions, morphologies and stability. In vitro releasing profiles was investigated in PBS solutions. Intrauterine injured rat model was established and treated with different methods. The results of H&E staining, Masson trichrome staining, western blots assay, immunohistochemical staining and immunofluorescence staining revealed that endogenous c-kit positive stem cells (HSCs) were recruited to the injury site and promoted the wound recovery. After 7 days' treatment, uterus treated with SDF-1α releasing hydrogel showed no difference with control group on endometrial thickness, glands number and fibrosis level. This work provides a possible method for intrauterine adhesion healing.

Synthesis of urea-functionalized chitosan derivatives for potential antifungal and antioxidant applications

In the current study, five novel urea-functionalized chitosan derivatives were synthesized via condensation reactions of chloroacetyl chitosan (CTCS) with urea groups bearing nitrogen-containing heterocycles. In order to identify the structure characteristics of chitosan derivatives, FT-IR, ¹H NMR spectroscopy, and elemental analysis were carried out. The antifungal activity of the derivatives against four species of phytopathogen (Fusarium oxysporum f. sp. niveum, Phomopsis asparagus, Fusarium oxysporum f. sp. cucumebrium Owen, and Botrytis cinerea) was evaluated. Furthermore, the antioxidant activity of chitosan derivatives was tested by hydroxyl-radical scavenging and superoxide-radical scavenging assays. The results indicated that chitosan derivatives bearing urea groups displayed superior bioactivity compared with chitosan. Besides, L929 cells were adopted for cytotoxicity test of chitosan and synthesized samples by CCK-8 assay and all samples showed decreased cytotoxicity. These results suggested that the novel urea-functionalized chitosan derivatives could be an ideal biomaterial for antifungal and antioxidant applications.

Therapeutic effect of chitosan on CCl4‑induced hepatic fibrosis in rats

Chitosan is a linear polysaccharide that is made by treating the chitin shells of shrimp and crustaceans with an alkaline substance, for example sodium hydroxide. Due to its unique physical and chemical properties, chitosan has a wide range of applications in the medical field. Currently, there are no effective treatments for liver fibrosis; therefore, the aim of the present study was to investigate the therapeutic effect of chitosan in a CCl4‑induced hepatic fibrosis (HF) rat model. The serum levels of aspartate transaminase (AST), alanine transaminase (ALT) and alkaline phosphatase (ALP) were measured by ELISA. Collagen (COL) 3 and α‑smooth muscle actin (SMA) expression levels in the rat liver were detected by reverse transcription‑semiquantitative polymerase chain reaction and western blotting, respectively. The results demonstrated that treatment with chitosan significantly improved HF, by decreasing the serum levels of AST, ALT, and ALP; improving liver histology; and decreasing the expression levels of COL3 and α‑SMA. Chitosan may offer an alternative approach for the clinical treatment of HF.

Microwave-assisted synthesis and evaluation of type 1 collagen-apatite composites for dental tissue regeneration

The aim was to develop an economical and biocompatible collagen-based bioactive composite for tooth regeneration. Acid-soluble collagen was extracted and purified from fish scales. The design was innovated to molecularly tailor the surface charge sites of the nano-apatite providing chemical bonds with the collagen matrix via microwave irradiation technique. The obtained collagen was identified by sodium dodecyl sulfate polyacrylamide gel electrophoresis analysis. The composites were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis/differential scanning calorimetry, and scanning electron microscopy. MC3T3-E1 cell lines were used to assess the biological effects of these materials by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetra zolium bromide (MTT) assay. Indirect contact test was performed by extracting representative elutes in cell culture media and sulforhodamine B analysis was performed. Chorioallantoic membrane assay was conducted to define the new vessels formation behavior. The purity of collagen extracts was determined and showed two α-chains, i.e. the characteristic of type I collagen. Fourier transform infrared spectroscopy showed the characteristic peaks for amide I, I, III, and phosphate for collagen and composites. Scanning electron microscopy images showed three-dimensional mesh of collagen/apatite nano-fibers. Nontoxic behavior of composites was observed and there were graded and dose-related effects on experimental compounds. The angiogenesis and vessels formation behavior were observed in bioactive collagen composite. The obtained composites have potential to be used for tooth structure regeneration.