Immobilization of heparin/poly-l-lysine microspheres on medical grade high nitrogen nickel-free austenitic stainless steel surface to improve the biocompatibility and suppress thrombosis

Problems in Welding of High Nitrogen Steel: A Review

High nitrogen steel (HNS) has an excellent tensile strength and impact property due to the solid solution strengthening of nitrogen, which provides a good application prospect in many fields. Fusion welding is one of the main processing methods of HNS, but the process is prone to spatters, serious nitrogen losses, N2 porosities, and poor performances of joints, resulting in the failure of large-scale engineering applications of HNS. In this work, the development of HNS welding is reviewed, and the problems including the droplet transfer instability, N2 porosities, nitrogen losses and poor mechanical properties due to high nitrogen content are discussed. According to previous welding experiences, the adoption of a welding method with a low heat input is proposed, which utilizes powders instead of wires, optimizes compositions in the shielding gas and feeding materials in order to solve the above problems, and improves the mechanical properties of the weld.

Microfluidics for detection of exosomes and microRNAs in cancer: State of the art

Exosomes are small extracellular vesicles with sizes ranging from 30-150 nanometers that contain proteins, lipids, mRNAs, microRNAs, and double-stranded DNA derived from the cells of origin. Exosomes can be taken up by target cells, acting as a means of cell-to-cell communication. The discovery of these vesicles in body fluids and their participation in cell communication has led to major breakthroughs in diagnosis, prognosis, and treatment of several conditions (e.g., cancer). However, conventional isolation and evaluation of exosomes and their microRNA content suffers from high cost, lengthy processes, difficult standardization, low purity, and poor yield. The emergence of microfluidics devices with increased efficiency in sieving, trapping, and immunological separation of small volumes could provide improved detection and monitoring of exosomes involved in cancer. Microfluidics techniques hold promise for advances in development of diagnostic and prognostic devices. This review covers ongoing research on microfluidics devices for detection of microRNAs and exosomes as biomarkers and their translation to point-of-care and clinical applications.

Blood biocompatibility enhancement of biomaterials by heparin immobilization: a review

Blood contacting materials are concerned with biocompatibility including thrombus formation, decrease blood coagulation time, hematology, activation of complement system, platelet aggression. Interestingly, recent research suggests that biocompatibility is increasing by incorporating various materials including heparin using different methods. Basic of heparin including uses and complications was mentioned, in which burst release of heparin is major issue. To minimize the problem of biocompatibility and unpredictable heparin release, present review article potentially reviews the reported work and investigates the various immobilization methods of heparin onto biomaterials, such as polymers, metals, and alloys. Detailed explanation of different immobilization methods through different intermediates, activation, incubation method, plasma treatment, irradiations and other methods are also discussed, in which immobilization through intermediates is the most exploitable method. In addition to biocompatibility, other required properties of biomaterials like mechanical and corrosion resistance properties that increase by attachment of heparin are reviewed and discussed in this article.

Dexamethasone-Loaded Bioactive Coatings on Medical Grade Stainless Steel Promote Osteointegration

In this study, a multilayer bioactive coating based on carboxymethyl cellulose (CMC) and dexamethasone (DEX) was prepared on medical-grade stainless steel (AISI 316LVM). Its aim was the controlled drug delivery of the incorporated anti‑inflammatory drug, which at the same time promotes osteogenic differentiation of mesenchymal stem cells. Due to DEX’s limited solubility in physiological fluids, which limits the loading capacity of coatings, it was further combined with β-cyclodextrin to increase its concentration in the bioactive coating. Controlled release of DEX from the multilayer coating was achieved in four steps: a “burst”, i.e., very fast, release step (in an immersion interval of 0–10 min), a fast release step (10–30 min), a slow-release step (60–360 min), and a plateau step (360–4320 min), following a zero-order release or Higuchi model release mechanism. Successful layer-by-layer coating formation was confirmed using attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). It was shown that the application of the coating significantly increases the hydrophilic character of AISI 316LVM, and also significantly increases the surface roughness, which is known to promote cell growth. In addition, electrochemical measurements demonstrated that the coating application does not increase the susceptibility of medical-grade stainless steel to corrosion. In vitro cell testing using all cell types with which such coatings come into contact in the body (osteoblasts, chondrocytes, and mesenchymal stem cells (MSCs)) showed very good biocompatibility towards all of the mentioned cells. It further confirmed that the coatings promoted MSCs osteogenic differentiation, which is the desired mode of action for orthopedic implants.

Chronic nickel (II) exposure induces the stemness properties of cancer cells through repressing isocitrate dehydrogenase (IDH1)

BACKGROUND

Nickel is a component of biomedical alloys that is released during corrosion or friction and causes cytotoxicity, mutation, differentiation or even carcinogenesis in tissues. However, the mechanisms underlying the potential hazards of Nickel-containing alloys implanted in the human body by surgery remain uncertain.

OBJECTIVE

To study the effect of Ni(II) (NiCl_2•6H₂O) on cancer cells.

METHODS

A549 and RKO cells were treated with various concentrations of Ni(II) to determine the effect of Ni(II) on cellular viability using a CCK8 assay. Flow cytometry was performed to analyze the effect of Ni(II) on apoptosis and the cell cycle. Sphere-forming assays were conducted to examine the stemness properties of A549 and RKO cells. Western blotting was to evaluate the expression levels of SOX2, IDH1, HIF-1ɑ and β-catenin. The expression of isocitrate dehydrogenase (IDH1) in rectum adenocarcinoma (READ) was analyzed by Gene Expression Profiling Interactive Analysis (GEPIA). Kaplan-Meier analysis was used to calculate the correlation between survival and IDH1 expression.

RESULTS

Long-term exposure (120 days) to 100 µM Ni(II) significantly repressed cell proliferation, decreased colony formation and arrested the cell cycle at the G₀/G₁ phase. In addition, the stem-like traits of A549 and RKO cells were significantly augmented. Ni(II) also significantly decreased the protein expression of IDH1 and the synthesis rate of NAPDH, which competitively inhibited α-ketoglutarate (α-KG) generation. The downregulation of IDH1 not only promoted β-catenin accumulation in the cell nucleus in a HIF-1ɑ signaling-dependent manner but also induced the expression of the transcription factor SOX2 to maintain the stemness properties of cancer cells. Moreover, IDH1 expression negatively correlated with the clinicopathologic characteristics of READ.

CONCLUSION

These findings demonstrate that chronic and continuous release of Ni(II) to the microenvironment suppresses IDH1 expression and augments the stemness properties of cancer cells via the activation HIF-1ɑ/β-catenin/SOX2 pathway to enhance local tumor recurrence in patients with implanted Nickel-containing alloys at surgical sites.

Alginate-based composite microspheres coated by berberine simultaneously improve hemostatic and antibacterial efficacy

It is important to develop effective, biocompatible, easily stored and affordable hemostats for controlling bleeding and preventing infection in prehospital trauma. In this study, we synthesized a series of alginate-based composite microspheres coated by different amounts of berberine (SCC-1B, SCC-5B and SCC-10B), which were further characterized using scanning electron microscopy (SEM), viscometer, particle analyzer and Fourier transform infrared (FT-IR) spectroscopy. The in vitro and vivo results demonstrated that compared to control group (SCC, Composite polysaccharide microspheres without berberine, and CMPHP, Commercial hemostatic agent), SCC-10B with proper content berberine (7%), not only exhibited inherent excellent antibacterial activity, but also enhanced hemostatic effect by increasing adhesion and aggregation of blood cells, which could be considered as synergistic effects. More importantly, through inserting berberine into the cross-linked network, biodegradability and biocompatibility of SCC-10B were also improved. Taken together, SCC-10B could be a candidate for emergency hemostatic and antibacterial treatment in prehospital trauma.

Endothelialization of cardiovascular devices

Blood-contacting surfaces of cardiovascular devices are not biocompatible for creating an endothelial layer on them. Numerous research studies have mainly sought to modify these surfaces through physical, chemical and biological means to ease early endothelial cell (EC) adhesion, migration and proliferation, and eventually to build an endothelial layer on the surfaces. The first priority for surface modification is inhibition of protein adsorption that leads to inhibition of platelet adhesion to the device surfaces, which may favor EC adhesion. Surface modification through surface texturing, if applicable, can bring some hopeful outcomes in this regard. Surface modifications through chemical and/or biological means may play a significant role in easy endothelialization of cardiovascular devices and inhibit smooth muscle cell proliferation. Cellular engineering of cells relevant to endothelialization can boost the positive outcomes obtained through surface engineering. This review briefly summarizes recent developments and research in early endothelialization of cardiovascular devices. STATEMENT OF SIGNIFICANCE: Endothelialization of cardiovascular implants, including heart valves, vascular stents and vascular grafts is crucial to solve many problems in our health care system. Numerous research efforts have been made to improve endothelialization on the surfaces of cardiovascular implants, mainly through surface modifications in three ways - physically, chemically and biologically. This review is intended to highlight comprehensive research studies to date on surface modifications aiming for early endothelialization on the blood-contacting surfaces of cardiovascular implants. It also discusses future perspectives to help guide endothelialization strategies and inspire further innovations.

P2000 - A high-nitrogen austenitic steel for application in bone surgery

Optimal treatment of bone fractures with minimal complications requires implant alloys that combine high strength with high ductility. Today, TiAl6V4 titanium and 316L steel are the most applied alloys in bone surgery, whereas both share advantages and disadvantages. The nickel-free, high-nitrogen austenitic steel X13CrMnMoN18-14-3 (1.4452, brand name: P2000) exhibits high strength in combination with superior ductility. In order to compare suitable alloys for bone implants, we investigated titanium, 316L steel, CoCrMo and P2000 for their biocompatibility and hemocompatibility (according to DIN ISO 10993-5 and 10993-4), cell metabolism, mineralization of osteoblasts, electrochemical and mechanical properties. P2000 exhibited good biocompatibility of fibroblasts and osteoblasts without impairment in vitality or changing of cell morphology. Furthermore, investigation of the osteoblasts function by ALP activity and protein levels of the key transcription factor RUNX2 revealed 2x increased ALP activity and more than 4x increased RUNX2 protein levels for P2000 compared to titanium or 316 steel, respectively. Additionally, analyses of osteoblast biomineralization by Alizarin Red S staining exhibited more than 6x increased significant mineralization of osteoblasts grown on P2000 as compared to titanium. Further, P2000 showed no hemolytic effect and no significant influence on hemocompatibility. Nanoindentation hardness tests of Titanium and 316L specimens exposed an indentation hardness (HIT) of about 4 GPa, whereas CoCrMo and P2000 revealed HIT of 7.5 and 5.6 GPa, respectively. Moreover, an improved corrosion resistance of P2000 compared to 316L steel was observed. In summary, we could demonstrate that the nickel-free high-nitrogen steel P2000 appears to be a promising alternative candidate for applications in bone surgery. As to nearly all aspects like biocompatibility and hemocompatibility, cell metabolism, mineralization of osteoblasts and mechanical properties, P2000 was similar to or revealed advantages against titanium, 316L or CoCrMo.

Recent advances to accelerate re-endothelialization for vascular stents

Cardiovascular diseases are considered as one of the serious diseases that leads to the death of millions of people all over the world. Stent implantation has been approved as an easy and promising way to treat cardiovascular diseases. However, in-stent restenosis and thrombosis remain serious problems after stent implantation. It was demonstrated in a large body of previously published literature that endothelium impairment represents a major factor for restenosis. This discovery became the driving force for many studies trying to achieve an optimized methodology for accelerated re-endothelialization to prevent restenosis. Thus, in this review, we summarize the different methodologies opted to achieve re-endothelialization, such as, but not limited to, manipulation of surface chemistry and surface topography.