A poly(2-hydroxyethyl methacrylate)-based resin improves the dentin remineralizing ability of calcium silicates

Guttapercha Improves In Vitro Bioactivity and Dentin Remineralization Ability of a Bioglass Containing Polydimethylsiloxane-Based Root Canal Sealer

Guttapercha (GP, trans-1,4-polyisoprene) is the most used tooth root filling material, and it must be used with an appropriate cement (typically a polydimethylsiloxane (PDMS)-based sealer) to ensure an adequate canal obturation. This study aimed to assess the bioactivity and dentin remineralization ability of a bioglass containing PDMS commercial endodontic sealer, BG-PDMS (GuttaFlow Bioseal), and to evaluate the possible influence of a GP cone (Roeko GP point) on the mineralization process. To this end, BG-PDMS disks were aged alone or in the presence of a GP cone in Hank's Balanced Salt Solution (28 d, 37 °C). Dentin remineralization experiments were carried out under the same conditions. Micro-Raman and IR analyses demonstrated that BG-PDMS is bioactive, thanks to the formation of a silica-rich layer with nucleation sites for B-type carbonated apatite deposition. This phase was thicker when BG-PDMS was aged in the presence of GP. The two materials influenced each other because GP, which alone did not show any bioactivity, nucleated a calcium phosphate phase under these conditions. Analogously, dentin remineralization experiments showed that BG-PDMS is able to remineralize dentin, especially in the presence of GP. Under the experimental conditions, GP acted as a templating agent for calcium phosphate deposition.

Comparative Raman study on the molecular structure and IN VIVO wear of poly(methyl methacrylate)-based devices used as temporary knee prostheses: Effect of the antibiotic

The infection rate of total knee arthroplasty is still high, in spite of the high success of this surgical procedure. The use of an antibiotic-loaded temporary spacer made of poly(methyl methacrylate) (PMMA) has been proposed to treat infected knee arthroplasties. This study was aimed at comparatively investigating, on a molecular scale, two types of spacers from the same manufacturer (Spacer K and Vancogenx-space knee, Tecres, Italy), which differ for the added antibiotic (gentamicin sulphate in Spacer K and gentamicin sulphate + vancomycin hydrochloride in Vancogenx). Raman spectroscopy was used to gain more insights into the possible effects of the antibiotic on the spacer composition and polymer structure both in the new components and after in vivo use. Vancogenx was found to contain a lower residual MMA content than Spacer K (about 0.15% versus 0.4%). The former contained a higher amount of isotactic stereosequences than the latter, while the syndiotactic content (the prevailing component) was not significantly different in the two prostheses. The presence of vancomycin hydrochloride influenced not only the degree of polymerization and PMMA tacticity and crystallinity, but in turn also the wear behavior. Actually, Spacer K retrievals were found more affected by in vivo implantation than Vancogenx-space knee ones, revealing slight variations in polymer tacticity and crystallinity and relative radiopacifier content, besides release of MMA and additives of polymerization. However, these changes did not appear worrisome, due to the temporary nature of the prosthesis. In view of these results, the addition of vancomycin hydrochloride could offer an advantage, in spite of the higher costs requested and the potential risks of its unselective use.

Secondary Root Canal Treatment with Reciproc Blue and K-File: Radiographic and ESEM-EDX Analysis of Dentin and Root Canal Filling Remnants

Secondary root canal treatment requires the complete removal of filling materials with different chemical-physical properties. A newly developed single-use NiTi instrument (Reciproc Blue, RB) may be more effective in root canal retreatment. The aim of the present study was to evaluate morphology and composition of remnants after retreatment with RB compared to traditional K-File technique, in canals obturated with Thermafil/AH Plus. Twenty-four single-rooted human teeth were shaped with NiTi obturated with AH-Plus/Thermafil and retreated using RB NiTi instruments or manual K-Files. Radiographs were taken to evaluate endodontic space and radiopacity of residual filling-material before/after procedures. After retreatment, samples were longitudinally split and observed by environmental scanning electron microscopy connected to energy dispersive X-Ray spectroscopy (ESEM-EDX) to analyze the debris/remnant position, microchemistry, and dentinal surface morphology. Time for retreatments was recorded and compared using one-way ANOVA (p-value = 0.05). Radiopaque filling residuals were found in both groups. RB system resulted statistically faster than manual K-File in retreatment procedure (p < 0.001). Root canal space radiographic appearance obtained after retreatment with RB was wider than K-File (p < 0.05). ESEM-EDX revealed 4 different morphological dentin area. Area-1: debris-free with typical Ca, P, and N composition of dentin and detected in 70% of the surface. Area-2: presence of deproteinized smear layer free from N and debris in 15% of the surface. Area-3: a thick packed smear layer N-free and with fine debris consisting of trace elements from sealer in 10% of the surface. Area-4: packed with debris and trace elements. No difference was observed between both instruments regarding root canal space appearance and ESEM-EDX analysis. Both systems were able to remove filling material but created a dentine morphology composed of packed debris and filling materials embedded into the smear layer. Dentin surface composition resulted in collagen depleted by irrigation procedures. The reciprocating system required less time to complete retreatment.

Bioactive tri/dicalcium silicate cements for treatment of pulpal and periapical tissues

Over 2500 articles and 200 reviews have been published on the bioactive tri/dicalcium silicate dental materials. The indications have expanded since their introduction in the 1990s from endodontic restorative and pulpal treatments to endodontic sealing and obturation. Bioactive ceramics, based on tri/dicalcium silicate cements, are now an indispensable part of the contemporary dental armamentarium for specialists including endodontists, pediatric dentists, oral surgeons andfor general dentists. This review emphasizes research on how these materials have conformed to international standards for dental materials ranging from biocompatibility (ISO 7405) to conformance as root canal sealers (ISO 6876). Potential future developments of alternative hydraulic materials were included. This review provides accurate materials science information on these important materials. STATEMENT OF SIGNIFICANCE: The broadening indications and the proliferation of tri/dicalcium silicate-based products make this relatively new dental material important for all dentists and biomaterials scientists. Presenting the variations in compositions, properties, indications and clinical performance enable clinicians to choose the material most suitable for their cases. Researchers may expand their bioactive investigations to further validate and improve materials and outcomes.

Spectroscopic and morphological data assessing the apatite forming ability of calcium hydroxide-releasing materials for pulp capping

A pulp capping material must perform as a barrier and protect the dental pulpal complex by inducing the formation of a new dentin bridge or dentin-like tissue.

Being a favorable condition for the healing process, the apatite forming ability of TheraCal (light-curable Portland-dimethacrylate cement) and Dycal (calcium hydroxide-based) pulp capping materials was studied in two simulated body fluids, i.e. Dulbecco’s Phosphate Buffered Saline (DPBS) and Hank’s Balanced Salt Solution (HBSS). The cements were analyzed before and after soaking in these media for different times (1–28 days) by ESEM-EDX, micro-Raman and IR spectroscopy. This data article refers to “An in vitro study on dentin demineralization and remineralization: collagen rearrangements and influence on the enucleated phase” (Di Foggia et al., 2019).

An in vitro study on dentin demineralization and remineralization: Collagen rearrangements and influence on the enucleated phase

Dentin remineralization is of clinical relevance in the therapy of caries and dentin hypersensitivity. This study is aimed at gaining more insights on a molecular scale, through IR spectroscopy, into dentin demineralization and remineralization. The dentin demineralization by ethylenediaminetetraacetic acid, EDTA (17%, 2 h) significantly altered the secondary structure distribution of collagen, upon loss of interaction with calcium ions. To investigate dentin remineralization, previously demineralized human dentin slices were soaked in Dulbecco's Phosphate Buffered Saline (DPBS) or Hank's Balanced Salt Solution HBSS, in close contact with three commercial cements used as sustained releasing sources of Ca²⁺ and OH^- ions (i.e. calcium hydroxide- and calcium silicate-based cements). IR spectroscopy showed the occurrence of remineralization under these conditions. Collagen did not lose its ability to chelate Ca²⁺, and these interactions allowed collagen to rearrange into a conformation similar to that of sound dentin. This process appeared slower in HBSS than DPBS, as also shown by the lower degree of maturation of the inorganic phase enucleated in the former medium (amorphous calcium phosphate versus B-type carbonated apatite). Collagen appeared to act as a spatial constraint to crystal deposition, affecting crystallinity and carbonate content of the enucleated phase. Remineralization was found to strongly depend on the calcium releasing ability of the cements. The fast formation of a rough apatite biocoating may represent a favorable clinical condition in the context of mineralized tissue regeneration.

Demineralization, Collagen Modification and Remineralization Degree of Human Dentin after EDTA and Citric Acid Treatments

The aim of the study was to investigate the effects of several decalcifying agents used as irrigant solutions in endodontic treatment on collagen and mineral components of dentin. Coronal dentin discs from five caries-free human third molars with a smear layer were treated for one minute with a chelating solution (1% Ethylenediaminetetraacetic acid (EDTA), 10% EDTA, 17% EDTA, 10% citric acid). Mineralization degree (Ca/N and P/N atomic ratios, IR I_apatite/I_{amide II} and I_{1410(carbonate)}/I_{554(phosphate)} spectroscopic ratios) and possible collagen rearrangements (collagen infrared (IR) amide II e III shifts) were evaluated by environmental scanning electron microscopy (ESEM)/energy dispersive X-ray spectroscopy (EDX) and IR spectroscopy before and after treatment (T0) and after ageing (T24h and T2m) in simulated body fluid (SBF). At T0, analysis showed that the highest demineralizing effect was achieved using a 10% citric acid solution and 10% EDTA, while the smallest effect was observed when using 17% EDTA. No significant collagen modifications were detected upon treatment with 1% EDTA, while subtle changes were observed after the other treatments. At T24h or T2m, analyses showed the highest remineralization values for 1% EDTA and the lowest for 10% citric acid, mainly at T2m. The samples treated with 17% EDTA showed slight collagen rearrangements upon remineralization. In conclusion, the highest demineralizing effect was observed for 10% EDTA and 10% citric acid. Collagen rearrangement was found for all the treatments except for 1% EDTA. The highest remineralization capability in SBF values was recorded for 1% EDTA and the lowest for 10% citric acid. A slight collagen rearrangement upon remineralization was still present in 17% EDTA-treated samples. Clinical use as a chelating agent in the endodontic therapy of citric acid and concentrated EDTA solutions should be reconsidered.

Phase pure, high hardness, biocompatible calcium silicates with excellent anti-bacterial and biofilm inhibition efficacies for endodontic and orthopaedic applications

Here we report for the very first time the synthesis of 100% phase pure calcium silicate nanoparticles (CSNPs) of the α-wollastonite phase without using any surfactant or peptizer at the lowest ever reported calcination temperature of 850 °C. Further, the phase purity is confirmed by quantitative phase analysis. The nano-network like microstructure of the CSNPs is characterized by FTIR, Raman, XRD, FESEM, TEM, TGA, DSC etc. techniques to derive the structure property correlations. The performance efficacies of the CSNPs against gram-positive e.g., S. pyogenes and S. aureus (NCIM2127) and gram-negative e.g., E. coli (NCIM2065) bacterial strains are studied. The biocompatibility of the CSNPs is established by using the conventional mouse embryonic osteoblast cell line (MC3T3). In addition, the biofilm inhibition efficacies of two varieties of CSNPs e.g., CSNPs(W) and CSNPs(WC) are investigated. Further, the interconnection between ROS e.g., superoxide (O₂^.-) and hydroxyl radical (^.OH) generation capabilities of CSNPs and their biofilm inhibition efficacies is clearly established for the very first time. Finally, the mechanical responses of the CSNPs at the microstructural length scale are investigated by nanoindentation. The results confirm that the α-wollastonite phases present in CSNPs(W) and CSNPs(WC) possess extraordinarily high nanohardness and Young's moduli values. Therefore, these materials are well suited for orthopaedic and endodontic applications.